延安新区压实Q_2黄土增减湿高压压缩变形特性

为研究压实Q2黄土在高压力条件下的增减湿高压压缩变形特性,采用DGD系列型高压固结仪分别对不同初始压实度和不同初始含水率条件下的压实Q2黄土试样进行高压压缩试验,分析压实Q2黄土压缩变形特性随初始压实度和初始含水率的变化规律;运用不同方法对压缩试验成果进行整理,分析侧限条件下压实Q2黄土应力应变关系特点。结果表明:压实Q2黄土的压缩变形特性受初始压实度和初始含水率的影响较大,在最大压实度和最优含水率处的压缩变形量最小;初始压实度不同,拟合压实Q2黄土应力应变关系曲线的函数也不同,在较低初始压实度条件下,用双曲线拟合效果较好,此时割线模量与应力呈线性关系,在较高初始压实度条件下,用幂函数拟合效果更好。     

基于两坐标雷达与红外传感器的融合跟踪

针对两坐标雷达与红外传感器的融合跟踪问题,提出一套基于航迹关联事件的后验概率最大化准则和"最近邻"思想的状态信息相关与融合估计的一体化实现方法,克服了两种传感器观测数据不完整给融合处理带来的困难,通过充分利用雷达的航迹,点迹和历史信息,融合高精度的红外测角和雷达测距信息,改善系统的跟踪能力.最后的仿真实验表明了该方法的有效性.     

22SiMn2TiB装甲钢异种焊接接头超声波探伤探头设计

用常规探头对22SiMn2TiB装甲钢与TWE312异种钢焊接接头进行缺陷检测,杂波和伪缺陷波导致灵敏度、信噪比不高。用扫描电镜观察到这种异种钢焊接接头主要为奥氏体+铁素体组织,其中奥氏体是主体组织。根据焊缝的组织特点,设计出了2.5P13×13K1.5型专用探头。在预制缺陷的焊接接头上进行了验证试验,结果表明2.5P13×13K1.5探头对接头内部的缺陷具有较高的检出率。     

Defence spending and economic growth in South Africa: A supply and demand model*

This paper provides a contribution to the growing corpus of knowledge and understanding of the interaction between economic growth and defence spending in South Africa by specifying a Keynesian simultaneous equation model and estimating the system for the period 1961 to 1997. The model contains a growth equation, a savings equation, a trade balance equation and a military burden equation and when estimated by single equation and systems estimation methods is relatively well specified. There is evidence of an overall negative effect of military spending on the economy over this period, though the significance of individual coefficients is low. There is certainly no evidence of any positive impact, suggesting that cuts in military spending do present an opportunity for improved macroeconomic performance.     

敏捷C2组织鲁棒性研究

敏捷性的研究是信息时代的组织研究中的重要方面。设计一种敏捷的C2组织,以保证C2组织在执行任务时能够发挥最佳性能,以达到灵活应对任务、减少资源浪费和提升作战效能的目的,这样的组织称为敏捷C2组织。本文从敏捷C2组织形式化概念模型构建开始,对敏捷C2组织的敏捷性测度中的鲁棒性的含义及其测度方法进行详细的定义和阐述,并通过实验对方法进行分析研究验证。     

U.S. Troops and Foreign Economic Growth

By way of an evolutionary game model we show that mediation in international conflicts might be harmful to the conflicting parties. In fact, under anarchy both parties can be better off than under an international regime if mediation reduces the parties’ reactive capacities (i.e. their abilites to respond to an aggression). This result is applied to issues currently discussed in the literature on international relations such as the role of the United Nations as a mediator of international conflicts.     

Fabrication and analysis of TIG welding-brazing butt joints of in-situ TiB2/7050 composite and TA2

Lightweight hybrid structures of Al MMCs and titanium alloy dissimilar materials have great prospect in the defence industry application. So, it is necessary to join Al MMCs with Ti metal to achieve this structural design. In this work, in-situ TiB2/7050 composite and TA2 were firstly attempted to join by TIG welding-brazing technique. The result was that the intact welding-brazing butt joint was successfully fabricated. The joint presents dual characteristics, being a brazing on TA2 side and a welding on TiB2/7050 side. At brazing joint side, ER4043 filler metal effectively wets on TA2 under TIG heating condition, and a continuous interfacial reaction layer with 1—3μm is formed at welded metal/TA2 interface. The whole interfacial reaction layers are composed of Ti(AlSi)3 intermetallic compounds (IMCs), but their morphologies at the different regions present obvious distinguishes. The microhardness of the reaction layers is as much as 141—190 HV. At welding joints side, the fusion zone appears the equixaed crystal structure, and the grain sizes are much smaller than those of welded metal, which is attributed to the effect of TiB2 particulates from the melted TiB2/7050 on acceleration formation and inhibiting growth for the new crystal nucleus. The tensile test results show that average tensile strength of the optimal welding-brazing joint is able to achieve 138 MPa. The failure of the tensile joint occurs by quasi-cleavage pattern, and the cracks initiate from the IMCs layer at the groove surface of TA2 and propagate into the welded metal.     

新指挥控制原理

指挥控制系统是兵力放大器,信息时代的挑战是要突破这种传统理念的束缚。传统的指挥控制赋予兵力系统以自动机功能,而新指挥控制原理则赋予兵力系统具有生命系统特征的进化能力,具有进化特征的兵力系统将更加灵活和更具适应性,采用自组织、自学习、自修复的运作方式,以满足系统与系统对抗、体系与体系对抗的需求为构建目标。文中在分析了指挥控制的基本问题的基础上,从指挥控制的性质的角度,归纳和提出了新指挥控制原理,并尝试解释原理的含义、本质、特点和可能应用。文中的观点对分析设计指挥控制体系、系统、方法具有理论和实践意义。     

电子对抗指挥控制系统的行为功能需求

电子对抗指挥控制系统的军事需求分析是制约电子对抗指挥控制系统建设质量的关键。本文主要介绍了电子对抗指挥控制系统的行为功能需求。     

基于Maxwell2D和Simplorer的永磁同步电机退磁模型设计

永磁体退磁故障是永磁电机的常见故障,对电机退磁故障进行早期检测和诊断可以有效防止灾难发生,具有重大意义。建立不均匀退磁故障状态下的Maxwell2D电机模型,利用仿真软件Maxwell2D与Simplorer构建永磁同步电机联合仿真系统,分别对电机的正常状态模型与退磁故障模型进行仿真,并对相电流信号进行分析。利用EMD-LSSVM变换建立的故障诊断模型对不同程度的退磁故障进行诊断。仿真结果表明:该模型可以精确地识别出微弱的退磁故障,验证了联合仿真退磁模型的正确性。