Critical interfaces in body armour systems

The ballistic performance, and behaviour, of an armour system is governed by two major sets of variables, geometrical and material. Of these, the consistency of performance, especially against small arms ammunition, will depend upon the consistency of the properties of the constituent materials. In a body armour system for example, fibre diameter, areal density of woven fabric, and bulk density of ceramic are examples of critical parameters and monitoring such parameters will form the backbone of associated quality control procedures. What is often overlooked, because it can fall into the User’s domain, are the interfaces that exist between the various products; the carrier, the Soft Armour Insert (SAI), and the one or two hard armour plates (HAP1 and HAP2). This is especially true if the various products are sourced from different suppliers.There are between 30 and 150 individual layers within a typical body armour system, and each of the interfaces between each of those layers will, in some way or another, contribute to the ballistic performance of the system. For example, consider the following interfaces/interlayers: (i) the frictional, sliding, inter-ply surfaces within a soft armour pack, and also between the pack and the carrier, (ii) the air-gaps that may develop within the soft armour pack, (iii) the interconnecting space between the soft armour pack and the hard armour plate, (iv) the nature of the interfaces between adjacent plies of a multiplied backing laminate, even in a highly compressed Ultra High Molecular Weight Polyethylene (UHMWPE) variant, (v) the interlayer between the ceramic and its substrate, within a HAP, and (vi) the geometrical fit between two hard armour plates within a stacked body armour system. This paper will provide a User-friendly overview of all such interfaces and provide unique guidance as to their criticality and influence.     

一种遥测信号的模式识别算法研究

如何进行遥测信号的提取是遥测信号数据处理的重要环节,针对典型脉冲码元,提出了特征提取和软件模板的建立及算法的实现.     

5－乙酰基－2－氨基二苯甲酮的合成

用对硝基苯乙酮、乙二醇、苯乙腈、氢气、高氯酸为原料,经酮基保护,环化,催化加氢和消除反应,合成出较高产率的5-乙酰基-2-氨基二苯甲酮。对反应机理作了初步探讨,并用元素分析、IR和1HNMR对其结构进行了表征。     

建立一类挠性航天器的动力学模型及面向控制的仿真环境

对于一类具有一个中心刚体和两块对称安装的太阳帆板的挠性航天器,针对其帆板较长、弹性位移较大,导致根据文献[2]直接建立的模型不准的问题,提出将弹性帆板分段处理的方法,分别引入浮动坐标系,建立系统的动力学仿真模型。并将针对整体模型设计的控制规律作用于该模型,进行了数值仿真。仿真结果表明,对于大变形情况,分段处理的方法十分有效。     

聚(2-甲氧基-5-丁氧基)亚苯基亚乙烯的合成及电性能

本文用对甲氧基苯酚、正溴丁烷、聚甲醛为原料， 经醚化， 双氯甲基化和碱性消除反应， 合成出长链共轭且可溶的聚（２甲氧基５丁氧基）亚苯基亚乙烯，用 Ｉ Ｒ 和１ Ｈ Ｎ Ｍ Ｒ 表征了中间体和聚合物的结构，并测定了聚合物的伏—安特性曲线。     

美军两栖编队指挥与控制体系及其指挥控制能力分析

美军两栖编队分两栖部队与远征打击群两种形式。在阐述美军两栖编队编成的基础上,研究了美军两栖编队指挥所的指挥编组,分析了各指挥编组对应的指控装备及基本功能。基于美军两栖作战理论及所装备的编队指挥控制装备,对其指挥控制中信息保障能力、兵力与平台指挥引导能力、武器控制与协调能力、辅助指挥能力、舰岸专移与相互替代能力进行了初步分析。研究结果可对两栖编队指挥控制装备的研制提供参考。     

Experimental investigation on anti-penetration performance of polyurea-coated ASTM1045 steel plate subjected to projectile impact

In this study, the anti-penetration performance of polyurea/ASTM1405-steel composite plate subjected to high velocity projectile was analyzed. Two kinds of modified polyurea material (AMMT-053 and AMMT-055) were selected and a ballistic impact testing system including speed measuring target system and high-speed camera was designed. This experiment was conducted with a rifle and 5.8 mm projectile to explore the effects by the polyurea coating thickness, the polyurea coating position and the glass-fiber cloth on the anti-penetration performance of polyurea/ASTM1405-steel composite plate. The result showed that the effects of polyurea coating position were different between two types of polyurea, and that the effects of glass-fiber position were disparate between two types of polyurea as well. For AMMT-053 polyurea material, it was better to be on front face than on rear face; whereas for AMMT-055 pol-yurea, it was better to be on rear surface although the difference was very subtle. Additionally, formulas had been given to describe the relationship between the effectiveness of polyurea and the thickness of polyurea coating. In general, AMMT-055 had better anti-penetration performance than AMMT-053. Furthermore, five typical damage modes including self-healing, crack, local bulge, spallation and local fragmentation were defined and the failure mechanism was analyzed with the results of SHPB test. Additionally, the bonding strength played an important role in the anti-penetration performance of polyurea/steel composite plate.     

钢筋混凝土外粘钢板结构裂缝的有限元数值模拟

随着高技术武器的不断发展,防护工程正面临着前所未有的威胁和挑战,新型防护结构及材料已经成为研究的热点。针对这一实际背景,运用ANSYS大型有限元软件,采用数值模拟的方法对普通钢筋混凝土结构和外粘钢板混凝土结构在相同均布面荷载作用下的变形、钢筋应力以及结构裂缝的开展情况进行了比较。结果表明外粘钢板的钢筋混凝土结构能够大大增强结构的抗力,并且有效的抑制了裂缝的开展。     

尾流模拟火箭弹空中弹道对模拟尾流生成区域的影响

为了研究尾流模拟火箭弹的空中弹道特性对模拟尾流区域的影响,建立火箭弹质点外弹道模型、阻力板和发动机空间运动微分方程以及连接绳的受力模型,得到火箭弹无控飞行、空中转向、空中分离至爆索展开入水全过程的空间运动微分方程。对尾流模拟火箭弹全程弹道进行仿真分析,着重分析不同初始射击诸元对爆索空中弹道的影响,探究初始发射角、脉冲发动机的喷管数量、点火时间以及火箭弹空中分离时间对模拟尾流生成区域的影响。仿真结果表明：初始发射角为15°时火箭弹射程和最大射高相对比较合理;火箭弹空中转向角度依赖于脉冲发动机总冲量,与点火时刻无关;空中分离时刻对爆索入水发泡区域影响不太明显,在满足转向要求和发泡区域要求的情况下应该尽早完成空中转向和分离。     

LaB6空心阴极中毒特性

LaB_6阴极与其他类型阴极相比具有电子发射电流密度大等优点,已广泛用于电推进、高发射密度电子枪等产品。为了研究LaB_6空心阴极中毒特性、识别LaB_6空心阴极主要失效模式,分别对LaB_6空心阴极暴露大气后性能变化特征和引起性能变化的原因进行了研究。结果表明:LaB_6空心阴极在暴露大气后表面吸附大量中毒气体,出现了发射体表面逸出功增加、发射体短期中毒现象。此时空心阴极的放电电压和阴极顶温度均有所上升,经过短期工作后放电电压和阴极顶温度均恢复初始状态。但LaB_6空心阴极严重中毒后,并不能通过加热和离子轰击方式去除表面生成的氧化物。因此,可以在实验过程中通过监测空心阴极的阴极顶温度和阳极电压变化间接表征空心阴极发射体状态。