球磨时间对纳米SiO_2/Cu复合材料摩擦学性能的影响

采用球磨法与热压烧结工艺制备了添加w（n-SiO2）=1.0%的铜基纳米复合材料。通过球盘式摩擦磨损试验机测试了复合材料的摩擦磨损性能,采用排水法和场发射扫描电镜（FSEM）研究了复合材料的致密度、显微组织和磨损形貌。结果表明：球磨可提高复合材料的致密度,改善n-SiO2在铜基体中的分散均匀性;随球磨时间的增加,复合材料的动摩擦因数和磨损量先减小后增加,球磨10 h复合材料具有较低的摩擦因数和磨损量,磨损机理主要为磨料磨损。     

陶瓷基复合装甲防12.7mm穿甲燃烧弹的靶试研究（Ⅱ）

基于对材料特性和防弹机理的认识,设计了由（SiC＋Si）陶瓷、616装甲钢和高强PE材料构成的陶瓷基复合靶板,靶板防护面密度为118 kg/m2,尺寸为500 mm×500 mm×25 mm。利用现役12.7 mm穿甲燃烧弹考核靶板在6发弹打击下的防护能力,检验靶板设计思路。结果表明：靶板结构是可行的,可防住V25为818 m/s的现役12.7 mm穿甲燃烧弹。     

陕西蒲城Q_2黄土物质组成试验研究

利用激光散射粒度分布分析仪、X射线衍射仪等先进的测试手段和化学成分分析,得到了陕西蒲城Q2黄土的物质组成特点,包括颗粒组成、矿物成分、化学成分、易溶盐含量、酸碱特性等,并指出与Q3黄土的差异。为深入研究Q2黄土的湿陷机理和工程地质特性以及解释与Q3黄土工程性质的差异提供科学依据。     

军用物联网研究综述

物联网是近两年的研究热点,当前,军用物联网的发展尚处于起步阶段。提出了军用物联网的概念,研究了军用物联网关键技术,阐述了军用物联网在作战训练、后勤保障、武器装备等领域的应用,展望了军用物联网研究工作中将遇到的挑战及应对方法,为军用物联网的技术研制、公共支撑环境和应用示范服务提供借鉴。     

基于作战仿真的装甲车辆作战效能评估方法

在研制开发装甲车辆的过程中需要预先知道设计的装备是否满足未来战场需要,主要是它的作战效能是否能满足要求。为了获得研制中装备的作战效能,较好的办法是建立作战模型进行仿真。在仿真结果的基础上,通过选取作战效能评估的主要评价指标,建立装甲车辆作战效能的一个综合评估模型,得到了作战效能。     

Preparation and characterization of HMX/EVA/hBNNSs micro-composites with improved thermal stability and reduced sensitivity

Hexagonal boron nitride nanosheets(HBNNSs)have huge potential in the field of coating materials owing to their remarkable chemical stability,mechanical strength and thermal conductivity.Thin-layer hBNNSs were obtained by a liquid-phase exfoliation of h-BN powders and incorporated into EVA coatings for improving the safety performance of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX).HBNNSs and ethylene-vinyl acetate copolymer(EVA)were introduced to HMX by a solvent-slurry process.For com-parison,the HMX/EVA and HMX/EVA/graphene(HMX/EVA/G)composites were also prepared by a similar process.The morphology,crystal form,surface element distribution,thermal decomposition property and impact sensitivity of HMX/EVA/hBNNSs composites were contrastively investigated.Results showed that as prepared HMX/EVA/hBNNSs composites were well coated with hBNNSs and EVA,and exhibited better thermal stability and lower impact sensitivity than that of HMX/EVA and HMX/EVA/G composites,suggesting superior performance of desensitization of hBNNSs in explosives.     

Bending and stress analysis of polymeric composite plates reinforced with functionally graded graphene platelets based on sinusoidal shear-deformation plate theory

The bending and stress analysis of a functionally graded polymer composite plate reinforced with gra-phene platelets are studied in this paper. The governing equations are derived by using principle of virtual work for a plate which is rested on Pasternak's foundation. Sinusoidal shear deformation theory is used to describe displacementfield. Four different distribution patterns are employed in our analysis. The analytical solution is presented for a functionally graded plate to investigate the influence of important parameters. The numerical results are presented to show the deflection and stress results of the problem for four employed patterns in terms of geometric parameters such as number of layers, weight fraction and two parameters of Pasternak's foundation.     

分布式A2C2决策队设计

现代战争的特点是高度的分布式协同作战。面对瞬息万变的战场需求 ,完成分布协同作战的指挥自动化系统 ,就必须能够自动适应战场需求变化 ,不断改变指挥系统组织结构。因此 ,实现指挥自动化系统的中心工作是建立 C2系统自适应变结构决策队组织。论述了建立自适应分布式指挥决策组织结构的有关问题 ,研究了在分布式条件下 ,自适应 C2决策队结构的设计。     

The Early Responses of Air-backed plate subjected to underwater explosion with aluminized explosives

This work aims to research the effects on the early responses of the air-backed plate subjected to the loading generated by the underwater explosion with aluminized explosives. The loading characteristics of underwater explosion for ideal explosive (TNT), aluminized explosives (RS211 and RBUL) are obtained experimentally. The tested aluminized explosives have different energy output compared with TNT. Based on the Taylor plate theory, the early responses of the air-backed steel plate affected by the measured loading is analyzed. The analytical results indicate that the pressure curve of the shock wave within 1 time decay constant is the main factor affecting the kick-off velocity of the plate when cavitation occurring. The velocity responses of the plate produced by the loading of RS211 and RBUL are obviously different with that of an equivalent TNT charge, which also indicates validity and suitability should be noticed in the case of substituting TNT for aluminized explosives. Moreover, the uncertainties in the responses of the plate produced by RS211 and RBUL are much larger than TNT.     

The mechanical performance and a rate-dependent constitutive model for Al3Ti compound

The Al₃Ti compound has potential application in the high temperature structure materials due to its low density, high strength and stiffness. The mechanical behaviors of the material under different loading rates were studied using compression tests. The results indicate that Al₃Ti is a typical brittle material and its compressive strength is dependent on the strain rate. Therefore, a series of rate-dependent constitutive equations are needed to describe its mechanical behaviors accurately. However, it is still short of professional research on the material model for Al₃Ti. In this study, the material model was developed on the basis of JH-2 constitutive equations using the experimental data. The model was then applied in simulating the impact process of Ti/Al₃Ti metal-intermetallic laminate composites so as to validate the established model. Good agreement between simulation and experiment results shows the constitutive model predict the material responses under high rate and large deformation accurately. This work provides more support for the theoretical and numerical research on the intermetallic.