焊接钢质药筒与引伸药筒内弹道设计一致性研究

装备内弹道的一致性对其性能影响较大。经过长期对多个弹种用药筒的设计、使用和考核,发现用药筒在膛内容积一致性来进行弹道一致性设计比较适用和相对准确,同时发现挤进压力为P_0时的真实容积对内弹道一致性影响较大。此外焊接钢质药筒的内弹道一致性不仅达到了引伸药筒的要求,而且在或然误差和内弹道稳定性方面优于引伸药筒。     

复铜与铜导线的高频电磁性能比较

本文用有限元法计算复铜导线和铜导线内部的电磁场分布,比较两种导线的电磁场及其传输参数,最后得出结论——在高频电路中复铜导线可以取代铜导线.     

局部火灾场钢框架结构等效楼面活荷载分析

通过对火灾场钢结构框架梁极限抗弯、抗剪承载力的分析,提出采用等效楼面活荷载来描述火灾场对结构极限承载力的削弱,建立了火灾场等效楼面活荷载的计算公式,通过具体算例分析了厚涂型不同保护层厚度的框架钢梁极限抗弯、抗剪承载力及等效楼面活荷载的变化规律。分析结果表明,采用等效楼面活荷载可以直观地描述火灾场对结构构件极限承载能力的削弱,使火灾场钢结构受力分析变得简单、清晰。     

火场中A3钢的晶粒度与燃烧时间和温度关系的研究

本文模拟典型火灾温度－时间曲线,对热轧成的Ａ３钢进行受热处理,测定在不同燃烧时间和温度下Ａ３钢的晶粒度,给出了Ａ３钢的晶粒度与燃烧时问和温度之间的定量关系,提出了通过测定Ａ３钢晶粒度的大小来鉴定火场中不同部位的燃烧时间和温度的科学方法     

组织设计方法研究：组织协作与效能

介绍了A2C2系列实验,并通过对A2C2实验1到实验5所采用组织结构、结构设计算法以及实验所获取的数据分析,重点研究了组织协作与组织效能的关系,在其实验结论(组织协作与效能关系的不确定性结论)的基础上对组织结构设计优化算法提出了改进思想。     

定位定向导航系统轴角/数字转换的设计

介绍自行火炮定位定向导航系统中一种实现轴角-数字转换的设计方案。叙述了多极旋转变压器和旋转变压器/数字转换器AD2S80A的特点、工作原理及其粗精结合方法,给出了基于嵌入式计算机PC/104与AD2S80A芯片实现轴角-数字转换的接口电路与工作时序图,以寻北仪的转位控制为例,说明了该转换方法在自行火炮定位定向导航系统中的具体应用。     

深圳星河世纪结构方案优选

高楼结构设计,包含结构方案选定、构件内力计算、杆件和节点构造措施等三 部分内容。工程实践经验表明,高楼结构设计能否做到安全、经济、合理,关键在于选定的结 构方案是否恰当。围绕结构方案优化这一主题,探讨了以深圳星河世纪A栋办公楼为例, 就其有关的安全、经济、合理各方面进行系统的阐述,以供同类建筑在确定结构方案时参考。     

Modeling and solution for the ship stowage planning problem of coils in the steel industry

We consider a ship stowage planning problem where steel coils with known destination ports are to be loaded onto a ship. The coils are to be stowed on the ship in rows. Due to their heavy weight and cylindrical shape, coils can be stowed in at most two levels. Different from stowage problems in previous studies, in this problem there are no fixed positions on the ship for the coils due to their different sizes. At a destination port, if a coil to be unloaded is not at a top position, those blocking it need to be shuffled. In addition, the stability of ship has to be maintained after unloading at each destination port. The objective for the stowage planning problem is to minimize a combination of ship instability throughout the entire voyage, the shuffles needed for unloading at the destination ports, and the dispersion of coils to be unloaded at the same destination port. We formulate the problem as a novel mixed integer linear programming model. Several valid inequalities are derived to help reducing solution time. A tabu search (TS) algorithm is developed for the problem with the initial solution generated using a construction heuristic. To evaluate the proposed TS algorithm, numerical experiments are carried out on problem instances of three different scales by comparing it with a model‐based decomposition heuristic, the classic TS algorithm, the particle swarm optimization algorithm, and the manual method used in practice. The results show that for small problems, the proposed algorithm can generate optimal solutions. For medium and large practical problems, the proposed algorithm outperforms other methods. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 564–581, 2015     

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters, such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints. Hence in this study, the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. The optimum process parameters are found to be 1 mm electrode gap, 130 mm/min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.     

Feasibility of surface-coated friction stir welding tools to join AISI 304 grade austenitic stainless steel

An attempt is made to develop the tools that are capable enough to withstand the shear, impact and thermal forces that occur during friction stir welding of stainless steels. The atmospheric plasma spray and plasma transferred arc hardfacing processes are employed to deposit refractory ceramic based composite coatings on the Inconel 738 alloy. Five different combinations of self-fluxing alloy powder and 60% ceramic reinforcement particulate mixtures are used for coating. The best friction stir welding tool selected based on tool wear analysis is used to fabricate the austenitic stainless steel joints.