Sr2FeNbO6的晶体结构

系统地研究了Sr2FeNbO6的晶体结构,并利用步进扫描的X光数据成功地确定了Sr2FeNbO6的晶体结构,利用Rietveld方法精修出Sr2FeNbO6是空间群为Pnma(62)的正交结构,其中,晶胞参数分别为a=5.616 1A,b=7.971 7A,c=5.613 0A.     

极大单调算子零点的逼近问题

设H为实Hilbert空间,C为H的非空闭凸子集,T:C→2H为极大单调算子,假设S(T)={x∈H:0∈Tx}≠Φ。 xk∈H,βk>0,求 xk及ek满足( )　　xk+ek∈ xk+βkT( xk),‖ek‖≤ηk‖xk- xk‖, k≥0,其中,ηk≥0,supk>0ηk<1,βk≥β>0。设PC:H→C为H到C上的最近点投影算子,定义xk+1=PC( xk-ek),k≥0,证明了若T满足(S)型条件,则{xk}k≥0强收敛于T的某个零点。     

WINDOWS系统中的QoS保障机制研究

针对微软提出的常规服务质量(GeneralQualityofService,简称GQoS)的QoS解决方案,讨论了WINDOWS系统中的QoS保障机制。通过WINSOCK2的API函数设计程序,进行了Win98上的QoS性能测试。结果表明,在QoS启用的情况下,数据的传输时间和延迟抖动明显减小,说明WINDOWS系统中的QoS保障机制有效。     

Optimal inventory control policy for periodic‐review inventory systems with inventory‐level‐dependent demand

We consider a setting in which inventory plays both promotional and service roles; that is, higher inventories not only improve service levels but also stimulate demand by serving as a promotional tool (e.g., as the result of advertising effect by the enhanced product visibility). Specifically, we study the periodic‐review inventory systems in which the demand in each period is uncertain but increases with the inventory level. We investigate the multiperiod model with normal and expediting orders in each period, that is, any shortage will be met through emergency replenishment. Such a model takes the lost sales model as a special case. For the cases without and with fixed order costs, the optimal inventory replenishment policy is shown to be of the base‐stock type and of the (s,S) type, respectively. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

一种新型甲醛气体清除材料的实验研究

采用溶胶-凝胶法将纳米TiO2负载在活性碳纤维上,制备出一种新型甲醛气体清除材料。在制备中依次掺杂Fe3+和十二烷基苯磺酸钠(SDBS)对纳米TiO2进行改性,研究了纳米TiO2光催化活性的变化,并测试了自制材料的甲醛清除效率。结果表明:Fe3+和SDBS的添加不会改变纳米TiO2的晶型结构,但有利于晶粒的成长和负载膜的光催化活性;添加体积分数分别为0.8%的Fe3+和3%的SDBS时,材料的甲醛清除效率最高。     

损伤铝合金表面超声焊接界面断口分析与结合机理

采用超声焊接铝合金箔材的工艺修复处理表面腐蚀受损的2A12CZ基体,并利用Quanta200型环境扫描电子显微镜分析了截面形貌及箔材与基体之间界面表面断口的微观形貌。结果表明：从截面来看,箔材与基体之间大部分发生了焊合,界面分界线大部分消失;从机械脱开的界面断口来看,其表面微观形貌表现为鳞片状及韧窝状的典型金属型断口形貌。这说明在给定条件下,焊接部位大部分呈冶金结合。最后对铝台金箔材与铝合金基体之间超声焊接机理进行了探讨。     

舰载试验指挥控制系统研究与实践

针对靶场海上试验发展的综合需求,对舰载试验指挥控制系统发展的必要性及现状进行了分析,重点从与靶场其它系统的接口关系、系统功能、体系结构及软件设计几方面完成了系统总体设计研究,最后阐述了系统实现过程的关键技术。实践表明,该系统的应用大大提高了海上试验指挥水平。     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

纳米SiO2改性聚合物锂离子电池的研究

研究了一种基于含氟聚合物的聚合物锂离子电池,考察了SiO2纳米粉对聚合物电解质隔膜的机械性能、吸液量以及电导率的影响,用电镜分析探讨了纳米改性聚合物电解质膜的微观结构;并以此纳米改性聚合物隔膜组装了小型的聚合物锂电池,研究了其电性能.     

Private military contractors’ financial experiences and incentives

ABSTRACT

This article analyses findings from an original survey of 187 private military contractors on their incentives for working in the industry. Perceptions of contractors as “greedy, ruthless, and unscrupulous mercenaries” shape both public and military opinions of outsourcing and may impact U.S. military effectiveness, civil–military relations, and contractor identity. We find that contractors are motivated by a range of factors and that their financial experiences are not clearly more positive than that of state military troops. We recommend broad education of military and defense officials and the public in the U.S. and other relevant nations, regarding the true incentives of modern-day, Western contractors, in an effort to dispel misperceptions, increase effective utilisation of contractors, and beneficially shape PMC-military coordination. DoD may consider integrating such training into its current efforts to improve outsourcing, including its Joint OCS Planning and Execution Course, pre-deployment fora, and curricula of advanced military studies schools.