高速/超高速碰撞效应研究

高速/超高速碰撞会产生大量破片,并伴随闪光、等离子体等现象.高速碰撞材料受冲击产生射流及破片高温会引起碰撞闪光现象,获得了碰撞等离子体电磁场强度的变化规律.采用数值仿真与理论分析相结合的方法,获得了高速碰撞破片云团分布规律.     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Thermodynamics and performance of Al/CuO nanothermite with different storage time

The storage stability of energetic materials is important for its application. Here, the storage stability of Al/CuO nanothermite, which was prepared by electrospray method and stored with different storage time, was systematically researched. The activation energy of Al/CuO nanothermite was calculated by differential scanning calorimetry (DSC). The ignition temperature and the curve pressure history of Al/CuO nanothermite was measured using ignition temperature measuring device and constant-volume pressurization tests, respectively. Further, the thermites were characterized by X-ray Diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and Transmission electron microscopy (TEM). The results show that the morphology of the thermites did not change significantly. The activation energy was decreased from 254.1 kJ/mol to 181.8 kJ/mol after storage for 13 months. When stored for 0, 7 and 13 months, the peak pressures of Al/CuO nanothermite were 685.8 kPa, 626.3 kPa and 625.5 kPa, respectively. In addition to the ignition temperature, it was 775 ℃, 739 ℃ and 754 ℃, respectively. This result indicated that the ignition and combustion properties of Al/CuO nano-thermite are obviously reduced when stored for a long time, at room temperature.     

基于虚拟样机技术的轴对称推力矢量控制伺服机构设计

利用ADAMS软件建立了轴对称推力矢量控制伺服机构的虚拟样机,分析了4个关键设计点对伺服作动器运动时的交连干扰、正负摆角的不对称性以及驱动力臂波动的影响,完成了伺服机构布局方案的优化,为伺服机构布局方案的设计提供了精确的分析模型。     

铺层方式对碳/环氧管层间剪应力影响的有限元分析

利用有限元程序ANSYS7.0对软模膨胀成型制备的碳/环氧管件在轴向载荷下的层间剪应力进行了分析。表明铺层的不对称性会显著导致环向层间剪应力增大,增幅在0.43～1.14倍,但对轴向层间剪应力影响很小;碳/环氧管的轴向铺层和环向铺层的比例对轴向层间剪应力和环向层间剪应力有显著影响,其比例在7∶3～4∶1时可以有效降低碳/环氧管的层间应力。     

A generalization of the weighted set covering problem

We study a generalization of the weighted set covering problem where every element needs to be covered multiple times. When no set contains more than two elements, we can solve the problem in polynomial time by solving a corresponding weighted perfect b‐matching problem. In general, we may use a polynomial‐time greedy heuristic similar to the one for the classical weighted set covering problem studied by D.S. Johnson [Approximation algorithms for combinatorial problems, J Comput Syst Sci 9 (1974), 256–278], L. Lovasz [On the ratio of optimal integral and fractional covers, Discrete Math 13 (1975), 383–390], and V. Chvatal [A greedy heuristic for the set‐covering problem, Math Oper Res 4(3) (1979), 233–235] to get an approximate solution for the problem. We find a worst‐case bound for the heuristic similar to that for the classical problem. In addition, we introduce a general type of probability distribution for the population of the problem instances and prove that the greedy heuristic is asymptotically optimal for instances drawn from such a distribution. We also conduct computational studies to compare solutions resulting from running the heuristic and from running the commercial integer programming solver CPLEX on problem instances drawn from a more specific type of distribution. The results clearly exemplify benefits of using the greedy heuristic when problem instances are large. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

PIP工艺制备的C/SiC复合材料的氧化行为

PIP工艺制备的C/SiC复合材料中SiC基体富碳,因此增强体和基体均容易氧化。碳纤维和无涂层保护C/SiC复合材料试样在400~1300℃的氧化速率随温度升高而加快,低温为反应控制,高温为扩散控制。CVD-SiC涂层保护C/SiC复合材料和由CVD-SiC层、自愈合层、CVD-SiC层三层涂层保护C/SiC复合材料在400~1300℃的氧化先随温度升高而加快,然后减慢。三层涂层在800~1300℃有非常好的保护效果。扫描电镜照片显示自愈合层的玻璃态物质进入涂层裂纹中,填充裂纹且阻挡氧的通过,从而有良好的抗氧化保护效果。     

一种具有优先级的MAC协议性能分析

在移动通信中,为了满足高动态终端对接入的高要求,设计了一种带有优先级的随机预约/按需分配相结合的MAC协议RRDAMA-P(random reserve/demand assignment multiple access protocol with priority),并利用Opnet软件进行了建模仿真,仿真结果表明,RRDAMA-P协议不仅可以满足终端的优先级要求,而且实现了更好的吞吐量和时延性能。     

Production/distribution system design with inventory considerations

This study addresses the design of a three‐stage production/distribution system where the first stage includes the set of established retailers and the second and third stages include the sets of potential distribution centers (DCs) and potential capacitated suppliers, respectively. In this problem, in addition to the fixed location/operating costs associated with locating DCs and suppliers, we consider the coordinated inventory replenishment decisions at the located DCs and retailers along with the appropriate inventory costs explicitly. In particular, we account for the replenishment and holding costs at the retailers and selected DCs, and the fixed plus distance‐based transportation costs between the selected plants and their assigned DCs, and between the selected DCs and their respective retailers, explicitly. The resulting formulation is a challenging mixed‐integer nonlinear programming model for which we propose efficient heuristic solution approaches. Our computational results demonstrate the performance of the heuristic approaches as well as the value of integrated decision‐making by verifying that significant cost savings are realizable when the inventory decisions and costs are incorporated in the production distribution system design. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 172–195, 2012     

栅格数据处理中邻域型算法的并行优化方法

随着并行计算的成熟,众多数据密集型的栅格处理算法亟需利用并行计算来缩减执行时间.针对其中一类邻域型算法,构建了用于估计是时间代价的串行/并行时域模型,分析了各个组成的代价影响因素,提出了降低数据I/O代价的并行I/O方法和降低数据通信代价的光圈预测方法.实验证明,所提的两个优化方法可以使邻域型栅格处理算法的并行程序更加充分地利用并行计算资源,进而在一般并行化的基础上进一步提升其并行性能.