变极性等离子弧焊换向过程控制方法研究

通过试验证实了变极性等离子弧焊换向过程中存在电弧电流谐振现象,且不同极性的电流谐振峰值不同,依据电弧理论分析发现换向期间等效电弧电阻是一个时变量。对换向电路建模分析和仿真结果表明,在换向期间系统阻尼比为时变量,调整系统阻尼比是降低电流谐振峰值的有效途径。又根据变结构控制思想提出了新的换向控制方法,并重新设计了换向电路,显著降低了电流谐振峰值,改善了大电流焊接时换向器件的工作状态,为大功率变极性等离子弧焊电源的研制和开发提供了依据。     

火药复合焊条焊接接头的微观组织及性能

为提高战场装备的应急抢修能力,以火药和2Al/3CuO系高热剂为焊接热源,开发了一种新型的便携式焊接材料——火药复合焊条,对其焊缝的组织形貌及性能进行研究.试验结果表明,火药复合焊条的焊接属于熔化焊,焊缝与基体之间存在明显的过渡区,焊缝成形良好,焊缝的抗拉强度大于400MPa,高于母材本身强度,能够满足战场应急抢修能力的需要.     

燃烧型焊条焊接A3钢的研究

基于燃烧合成技术的燃烧机理,结合焊接母材的材质,制备可用于手工施焊的燃烧型焊条焊接A3钢。对焊接试件进行力学性能测试和金相分析,结果表明:焊接试件的结合方式为冶金结合,焊缝合金在细晶强化和弥散强化的作用下,试件的抗拉强度(σb)达到370 MPa,抗弯强度(σf)达到1 100 MPa,成功实现了燃烧型焊条对A3钢的焊接。     

Investigation on the process parameters of TIG-welded aluminum alloy through mechanical and microstructural characterization

Multi-pass TIG welding was conducted on plates (15×300×180 mm3) of aluminum alloy Al-5083 that usually serves as the component material in structural applications such as cryogenics and chemical processing industries. Porosity formation and solidification cracking are the most common defects when TIG welding Al-5083 alloy, which is sensitive to the welding heat input. In the experiment, the heat input was varied from 0.89 kJ/mm to 5 kJ/mm designed by the combination of welding torch travel speed and welding current. Tensile, micro-Vicker hardness and Charpy impact tests were executed to witness the impetus response of heat input on the mechanical properties of the joints. Radiographic inspection was performed to assess the joint's quality and welding defects. The results show that all the specimens displayed inferior mechanical properties as compared to the base alloy. It was established that porosity was progressively abridged by the increase of heat input. The results also clinched that the use of me-dium heat input (1-2 kJ/mm) offered the best mechanical properties by eradicating welding defects, in which only about 18.26% of strength was lost. The yield strength of all the welded specimens remained unaffected indicated no influence of heat input. Partially melted zone (PMZ) width also affected by heat input, which became widened with the increase of heat input. The grain size of PMZ was found to be coarser than the respective grain size in the fusion zone. Charpy impact testing revealed that the absorbed energy by low heat input specimen (welded at high speed) was greater than that of high heat input (welded at low speed) because of low porosity and the formation of equiaxed grains which induce better impact toughness. Cryogenic (-196 C) impact testing was also performed and the results corroborate that impact properties under the cryogenic environment revealed no appreciable change after welding at designated heat input. Finally, Macro and micro fractured surfaces of tensile and impact specimens were analyzed using Stereo and Scanning Electron Microscopy (SEM), which have supported the experimental findings.     

无电焊接材料的燃烧速度和燃烧温度研究

采用高放热性的铝热剂（CuO＋Al）并加入适当的添加剂,制备了便携式的无电焊接笔材料,其燃烧速度可控,且具有高的燃烧温度。研究了反应剂颗粒大小、混料均匀性等对无电焊接笔材料的燃烧性能的影响。结果表明：反应剂粒径对无电焊接笔的燃烧速度具有显著影响,随着反应剂粒径的增大,燃烧速度明显减慢。反应剂粒径和混料时间是影响单位时间放热量和混料均匀度的主要因素,因而对无电焊接笔的燃烧温度具有明显影响。在一定的混料时间下,反应物粉末具有最佳的混料均匀性。反应物粒径小且混料均匀性好的无电焊接笔材料,其燃烧温度高。     

焊接过程对焊接残余应力及残余变形的影响

采用热弹塑性有限元法 ,对直通焊和多人同时分段焊两种焊接过程的平板对接焊时焊接应力变形和圆柱壳板环缝的焊接变形进行比较 ,认为多人同时分段焊较直通焊无论在降低焊接残余应力还是焊接残余变形都具有非常显著的效果     

激光——等离子弧复合焊铝锂合金熔化过程的分析

为了研究激光-等离子弧复合焊熔化过程中的传热和流动特性,建立了针对1420铝锂合金的数值分析模型。在同时考虑表面张力、电磁力和热浮力作用的情况下,利用有限控制容积法求解该模型,得到熔池流场和温度场的数值解,从而直观地反映熔池形状的变化过程,并采用无量纲分析法对不同作用力对熔池传热和流动过程的影响进行定量化研究。分析结果表明：熔深的增长快于熔宽,因为熔深增加的主要机理是小孔效应,而熔宽增加的机理为对流传热作用;表面张力对熔池流动的影响最大,比电磁力的作用大1个数量级,比热浮力的作用大3个数量级;在熔化过程中,对流传热的作用大于热传导作用,心数最大值达7．6。     

添加剂对无电焊接脱渣性及焊缝成形的影响

针对焊接熔渣严重影响无电焊接焊缝成形的问题,通过添加造渣剂组分,研究了添加剂对无电焊接熔渣脱渣性及焊缝成形的影响。测试结果表明:添加剂的加入,使得无电焊接熔渣体系中形成多种多元化合物,并均匀、弥散地分布在Al2O3基体之中,形成规则的片层状组织,具有较好的相容性,而且通过形成多种多元化合物,使得无电焊接熔渣中的Al2O3相含量明显降低,从而显著地改善了无电焊接的脱渣性和焊缝成形性能,焊接接头的拉伸强度得到明显提高。     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.     

无电焊接热循环测试研究

利用热电偶测试了无电焊接过程中同一厚度钢板不同位置、不同厚度钢板同一位置处的焊接热循环曲线,探讨了无电焊接热循环规律及焊接母材厚度对无电焊接热循环的影响。研究表明：无电焊接时,焊件上不同位置点的热循环曲线与电弧焊基本相似。但相较而言,无电焊接在加热阶段的升温速度与冷却阶段的降温速度均显著小于电弧焊。无电焊接过程中,焊件上离焊缝中心线越近,其升温速度越大,峰值温度越高,冷却速度也越大,这一变化规律与电弧焊时完全一致。无电焊接时,焊接热量沿横向的传热速度远大于其沿纵向的传热速度,这使得焊件厚度对无电焊接的影响较为显著,也是焊件厚度增加将导致焊接难度显著增大的根本原因。