低空复杂场景红外弱小目标快速精准检测

针对低空复杂场景下红外弱小动目标检测难度大、虚警率高等问题,面向探测系统中高帧频图像实时处理应用需求,提出基于全卷积网络的弱小目标精准检测方法和基于现场可编程逻辑门阵列(field programmable gate array, FPGA)的低时延并行处理方法。采用轻量化全卷积网络对红外图像中弱小目标进行空域检测,对相邻图像帧疑似目标进行时域轨迹关联以进一步降低虚警率。实验结果表明:上述方法相比于五种传统方法在检测率和虚警率性能方面均有显著提升,并在单片FPGA上完成100 Hz图像实时处理,处理时延低于1.8 ms,实现低空复杂场景弱小目标高精度高鲁棒快速实时检测。     

Cell-type continuous electromagnetic radiation system generating millimeter waves for active denial system applications

The cell-type continuous electromagnetic radiation system is a demonstration device capable of generating high-power millimeter electromagnetic waves of a specific wavelength and observing their effects on living organisms. It irradiates a biological sample placed in a 30 × 30 × 50 cm³ cell with electromagnetic waves in the 3.15-mm-wavelength region (with an output of ≥1 W) and analyzes the temperature change of the sample. A vacuum electronic device-based coupled-cavity backward-wave oscillator converts the electron energy of the electron beam into radiofrequency (RF) energy and radiates it to the target through an antenna, increasing the temperature through the absorption of RF energy in the skin. The system causes pain and ultimately reduces combat power. A cell-type continuous electromagnetic radiation system consisting of four parts—an electromagnetic-wave generator, a high-voltage power supply, a test cell, and a system controller—generates an RF signal of ≥1 W in a continuous waveform at a 95-GHz center frequency, as well as a chemical solution with a dielectric constant similar to that of the skin of a living organism. An increase of 5 °C lasting approximately 10 s was confirmed through an experiment.     

Three-dimensional coordinates test method with uncertain projectile proximity explosion position based on dynamic seven photoelectric detection screen

To objectively obtain the three-dimensional coordinates of the projectile fuze proximity explosion when projectile intersects the head of missile target, we propose a dynamic seven photoelectric detection screen test method, which is made up of six plane detection screens and a flash photoelectric dynamic detection screen. The three-dimensional coordinates calculation model of the projectile proximity explosion position based on seven plane detection screens with dynamic characteristics is established. According to the relation of the dynamic seven photoelectric detection screen planes and the time values, the analytical function of the projectile proximity explosion position parameters under non-linear motion is derived. The projectile signal filtering method based on discrete wavelet transform is explored in this work. Additionally, the projectile signal recognition algorithm using an improved particle swarm is proposed. Based on the characteristics of the time duration and the signal peak error for the projectile passing through the detection screen, the signals attribution of the same projectile passing through six detection screens are analyzed for obtaining precise time values of the same projectile passing through the detection screens. On the basis of the projectile fuze proximity explosion test, the linear motion model and the proposed non-linear motion model are used to calculate and compare the same group of projectiles proximity explosion position parameters. The comparison of test results verifies that the proposed test method and calculation model in this work accurately obtain the actual projectile proximity explosion position parameters.     

围压下固体推进剂的破坏机理分析

贴壁浇筑的固体发动机推进剂药柱在点火状态下处于三向围压状态,而环向承受拉应变,亟待对围压下推进剂的破坏机理展开研究。基于自研的围压加载试验系统,通过开展推进剂在不同围压、温度和应变率下的单轴拉伸试验来研究围压、温度和应变率的耦合作用对推进剂力学行为的影响。针对围压下推进剂的力学响应特征,通过细观力学仿真进一步研究围压下推进剂的破坏形式,同时借助电镜扫描试验分析推进剂试样断面的形貌特征,通过试验和仿真相结合的手段分析了围压下推进剂的破坏机理。研究结果表明,围压下推进剂的损伤界面显著减少,且随着围压载荷的逐渐增加,推进剂的损伤形式从以颗粒脱湿为主转变为以颗粒破碎为主。     

数组越界软件测试系统的设计与实现

软件测试系统的研制是现阶段软件测试领域研究的一个热点.首先针对C/C 语言常见数组越界错误类型进行了分析,介绍了软件测试的一些基本概念,而后给出了软件测试系统设计,对系统设计的各个阶段进行了说明,并且给出了一种错误类型检查的算法设计,它在软件测试检测中具有通用性和代表性,最后给出了软件测试的实验结果.     

考虑相位噪声影响的单阵元被动合成阵列算法

考虑到现有单阵元被动合成阵列算法对阵元的运动模型假设过于理想且对相位噪声的适应能力不足,首先,提出一种适用于阵元任意机动方式的单阵元被动合成阵列通用算法,进而通过相位噪声模型分析,给出最大相参时间及有效合成阵元数的选取方法,重建了合成阵列的流形矢量,得到了与相位噪声模型相匹配的改进算法.然后,在相位噪声影响条件下,推导了单阵元被动合成阵列波达方向的理论估计方差下限.仿真分析表明,较未考虑相位噪声影响的算法,改进算法能够有效提高相位噪声影响下的单阵元被动合成阵列测向精度.     

电视制导系统抗干扰性能评估

提出了一种空地电视制导导弹图像传输系统抗干扰评估的总体框架,建立了电磁干扰条件下系统的抗干扰评估的空间模型。而后基于有限状态机理论,建立了电视制导导弹图像识别模态转换模型,详细讨论了典型干扰对电视图像数据链的影响。最后,应用计算机仿真技术,得到制导系统在不同信噪比条件下导弹的最大作用距离和图像干扰效果。     

航天器软件的研发路线

航天器自主能力构建面临着需求不断增多、多变、复杂化、未知的发展趋势,需要在软件研发方式和架构设计上做出改变.在分析已有的4种研发路线的基础上,提出第5条路线,即基于模型化、数据化设计思想的研发路线;提出具有即插即用能力的业务模型,采用电子数据单技术自底向上构建设备级和功能业务级的即插即用能力;以智能规划业务为例说明了业...