B4C／Al复合板中应力波行为分析（Ⅱ）

在已建立的应力波传播模型和研究弹、板间作用力所获结果的基础上,为分析复合板应力的变化,对复合板弹板碰撞承受的应力进行了简化处理,根据应力波传播特性,确定了复合板内能量集中区域,研究了应力波在复合板巾的传播和能耗,并讨论了应力波对陶瓷的作用。通过近似计算,发现烧蚀消耗的弹丸动能较大,在复合板中,Al板的塑性变形吸收了19％的弹丸动能。     

超音速等离子制备Al/Ni涂层的性能特点

以超音速等离子喷涂系统(HEPJet)为平台,采用铝包镍(Al/Ni)自粘结粉末,借助Spray Watch2i在线监测系统、扫描电子显微镜(SEM)、X射线衍射仪(XRD)和WE-10A万能拉伸试验机,研究了超音速等离子喷涂Al/Ni粒子的速度、温度及涂层的组织性能。研究结果表明:超音速等离子喷涂Al/Ni自粘结粉末时,与普通火焰喷涂不同,射流中无明显的放热反应特征,涂层中也未发现Al-Ni化合物;超音速等离子的喷涂功率、喷涂距离等参数对Al/Ni喷涂粒子的状态和涂层组织性能影响显著,当功率为54.6kW、喷涂距离为150mm时,Al/Ni涂层组织致密,与基体的结合强度高达56MPa。     

Experimental and numerical investigations of interface properties of Ti6Al4V/CP-Ti/Copper composite plate prepared by explosive welding

Explosive welding technique is widely used in many industries. This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods. Interlayer plays an important role to improve the welding quality and control energy loss during the collision process. In this paper, the Ti6Al4V plate was welded with a copper plate in the presence of a commercially pure titanium interlayer. Microstructure details of welded composite plate were observed through optical and scanning electron microscope. Interlayer-base plate interface morphology showed a wavy structure with solid melted regions inside the vortices. Moreover, the energy dispersive spectroscopy analysis in the interlayer-base interface reveals that there are some identified regions of different kinds of chemical equilibrium phases of Cu–Ti, i.e. CuTi, Cu₂Ti, CuTi₂, Cu₄Ti, etc. To study the mechanical properties of composite plates, mechanical tests were conducted, including the tensile test, bending test, shear test and Vickers hardness test. Numerical simulation of explosive welding process was performed with coupled Smooth Particle Hydrodynamic method, Euler and Arbitrary Lagrangian-Eulerian method. The multi-physics process of explosive welding, including detonation, jetting and interface morphology, was observed with simulation. Moreover, simulated plastic strain, temperature and pressure profiles were analysed to understand the welding conditions. Simulated results show that the interlayer base plate interface was created due to the high plastic deformation and localized melting of the parent plates. At the collision point, both alloys behave like fluids, resulting in the formation of a wavy morphology with vortices, which is in good agreement with the experimental results.     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

Al2O3催化氧化脱除GB染毒空气的研究

以浸渍法制备的10%V／Al2O3为催化剂,研究对GB染毒空气的脱除效果,考察接触时间、温度、温度和浓度等因素对GB染毒空气脱除效果的影响,用GC-MS和LC-MS对尾气组分进行了检测分析．     

Becoming the enemy: Convergence in the American and Al Qaeda ways of warfare

The United States and Al Qaeda represent two fundamentally different forms of warfare. The US, with its basis in the Western way of warfare, relies on an almost totally instrumental form of warfare and Al Qaeda, with its basis in the Islamic way of warfare, fights an expressive, existential form of warfare. This paper illustrates how both sides' ways of warfare are converging toward each other. It also argues that this is in fact a good thing because it will allow the US to understand its enemy and thereby allow the US to defeat him in terms he can understand.     

A critical perspective on a recent survey of opinion in Pakistan's tribal zone

This paper is a critically analysis of a public opinion survey recently conducted by the New America Foundation (NAF) and Terror Free Tomorrow (TFT) in the Federally Administered Tribal Area, FATA, of Pakistan on various issues pertaining to the war on terror. I argue that the survey misinforms about the tribal public opinion. To substantiate the argument I demonstrate that the survey is marred by ethical and methodological shortcomings.