移动式雷达网的建立与优化

提出了移动式雷达网的概念和移动式雷达网的4种作战模式:环形模式、伞形模式、宽正面模式和纵深模式,对每种模式的优缺点进行了探讨。具体研究了宽正面移动式雷达网模式的优化问题,建立了相应的优化数学模型,并简单介绍了最优化模型的灵敏度分析问题。     

一种改进的混合BLISS多学科设计优化方法

针对BLISS 2000优化过程中权值系数的引入给实际应用带来的困难,提出一种改进的BLISS优化过程——混合BLISS( Hybrid BLISS,HBLISS).该方法在保持BLISS 2000的基本算法结构的基础上取消权值系数,利用耦合变量的最小残差协调子系统级和系统级优化,给出了HBLISS的算法结构和基本流程...     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Multi-objective design optimization of composite submerged cylindrical pressure hull for minimum buoyancy and maximum buckling load capacity

This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure. The design optimization study is conducted for cross-ply layups [0s/90t/0u], [0s/90t/0u]s, [0s/90t]s and [90s/0t]s considering three uni-directional composites, i.e. Carbon/Epoxy, Glass/Epoxy, and Boron/Epoxy. The optimization study is performed by coupling a Multi-Objective Genetic Algorithm (MOGA) and Analytical Analysis. Minimizing the buoyancy factor and maximizing the buckling load factor are considered as the objectives of the optimization study. The objectives of the optimization are achieved under constraints on the Tsai-Wu, Tsai-Hill and Maximum Stress composite failure criteria and on buckling load factor. To verify the optimization approach, optimization of one particular layup configuration is also conducted in ANSYS with the same objectives and constraints.     

键联接的优化设计及可靠性计算

用优化设计的方法建立了键联接的优化数学模型,并对键联接进行了可靠性分析。     

分离模块航天器不确定性多学科设计优化

为了在分离模块航天器研制过程中充分考虑各类不确定性因素的影响,以此对全寿命周期成本、收益以及系统稳健性和灵活性进行综合评价和设计优化,本文对新概念航天器——分离模块航天器概念设计阶段的不确定性多学科设计优化(UMDO)进行了研究.首先,对UMDO方法进行了概述,对分离模块航天器UMDO的主要流程进行了介绍.其次,对分离...     

桁架式水塔结构的优化设计

本文将桁架式水塔结构等效成单自由度弹簧质量系统,考虑其在风载（包括定常与随机波动两部分）作用下,以桁架中的最大应力及频率耦合等作为约束条件的优化设计问题,导出了设计变量的最优化设计数学模型。     

时序驱动的详细布局方法

针对超大规模集成电路布局过程中时序优化问题,提出一种时序驱动的详细布局方法。对设计进行时序分析并获取时序违反路径集合,对路径上两个连续固定单元间的线网进行平滑处理,以减小路径曲折度以及减少线长。再针对每一个可移动单元与其相邻的线网建立二次规划时序模型,求解局部最优布局位置。对于给定的测试电路,实验结果表明,最差的时序违反与总的时序违反均有明显改善,采用ICCAD2015竞赛的测试模板和评价方法,总的时序性能有45~350 min的提升。     

基于松弛序列凸优化的轮式机器人协同轨迹规划

针对威胁环境下的多智能体协同轨迹规划问题,以轮式机器人为对象,研究了基于序列凸优化方法的协同轨迹规划方法.首先通过对轮式机器人模型的分析,给出单独轮式机器人实际物理约束,同时以状态量、控制量加权为性能指标,考虑运动学方程、避障避碰约束、个体物理性能约束、终端约束,建立多轮式机器人协同轨迹规划问题;其次,对运动学方程、避...     

基于多传感器优化布站的干扰目标定位模型

提出了传感器的优化部署模型 ,利用多传感器对干扰目标实现三角交叉定位 ,并给出了选择用于定位的传感器的数学模型。