弹道导弹防御中多目标拦截的策略

多目标拦截是弹道导弹防御的重大难题,也是目前美国导弹防御系统所遇到的最大的技术难点。在将多目标问题分为单弹头攻击和多弹头攻击2类问题的基础上,结合美国的相关研究计划,分别针对核爆炸防御、助推段防御、先进的目标识别器和多拦截器防御等多目标拦截策略进行了分析研究。     

基于EMP环境下的导弹作战防护对策分析

EMP武器以其极强的破坏性在现代战争中展现出了显著的作战效能。为了提高EMP环境下导弹作战防护能力,简单分析了EMP的产生过程,阐述了EMP武器在作战运用中的干扰、软(硬)杀伤的作用机理,研究了EMP环境对导弹及测试设备、指挥系统、计算机系统的影响,提出了导弹作战中对EMP的防护应采取设置法拉第笼、可靠接地、滤波等防护对策。     

一种RetinaNet与SE融合的航空取证目标检测算法

针对在开展航空侦察取证时缺乏自动化、智能化取证手段的情况,提出了一种基于Reti-naNet与SE融合的航空取证目标检测算法,解决目标尺度变化大、数据集中类别不均衡的问题,并通过SE (squeeze-excitations)模块引入注意力机制进一步改进性能.该改进算法中的特征金字塔网络FPN可有效应对目标尺寸变化较大...     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

基于离散化模型的雷达优化配置与部署方法

雷达优化配置与部署问题存在模型复杂的问题,很难对其进行优化.提出了一种基于网格的离散化模型.雷达配置与部署的方案、雷达网对防区的覆盖能力以及雷达布站的约束条件都分别通过网格和矩阵进行了定量描述,在此基础上,建立了雷达优化配置与部署问题的数学模型.这样就可以采用模拟退火算法对该问题优化.仿真实验证明了该方法的有效性和可行性.     

相变温控混凝土相变储热性能试验研究

混凝土中加入相变材料之后对水化反应产生的热量有一定的吸收,从而对混凝土内部温度有一定的控制作用,这将减少混凝土温度裂缝产生的几率.通过筛选带一定结晶水的硬脂酸、月桂酸和正十二醇的3种有机相变材料,模拟实际大体积混凝土工程来研究不同相变材料的掺量、控温效果.运用计算机软件绘制时间一温度曲线,从中搜寻出最佳的相变材料掺量.     

永磁直线同步电机矢量控制系统建模与实现

针对永磁直线同步电机(PMLSM)的特点,建立PMLSM在dq两相坐标系下的数学模型。介绍了永磁直线同步电机矢量控制系统并给出了硬件和软件的设计思想。通过对控制电流以及电机位置的实验分析,验证了所研究的基于矢量控制的永磁直线同步电机矢量控制方法的有效性。     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

Optimal policies for M/M/m queue with two different kinds of (N,T)‐policies

In this paper, two different kinds of (N, T)‐policies for an M/M/m queueing system are studied. The system operates only intermittently and is shut down when no customers are present any more. A fixed setup cost of K > 0 is incurred each time the system is reopened. Also, a holding cost of h > 0 per unit time is incurred for each customer present. The two (N, T)‐policies studied for this queueing system with cost structures are as follows: (1) The system is reactivated as soon as N customers are present or the waiting time of the leading customer reaches a predefined time T, and (2) the system is reactivated as soon as N customers are present or the time units after the end of the last busy period reaches a predefined time T. The equations satisfied by the optimal policy (N*, T*) for minimizing the long‐run average cost per unit time in both cases are obtained. Particularly, we obtain the explicit optimal joint policy (N*, T*) and optimal objective value for the case of a single server, the explicit optimal policy N* and optimal objective value for the case of multiple servers when only predefined customers number N is measured, and the explicit optimal policy T* and optimal objective value for the case of multiple servers when only predefined time units T is measured, respectively. These results partly extend (1) the classic N or T policy to a more practical (N, T)‐policy and (2) the conclusions obtained for single server system to a system consisting of m (m ≥ 1) servers. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 240–258, 2000     

阻燃剂的包覆研究

本文对溴系阻燃剂三（２,３－二溴丙基）异三聚氰酸酯（ＴＢＣ）进行了较深入的包覆研究,对包覆ＴＢＣ进行了热分析、电镜扫描和阻燃性能测试,并将包覆ＴＢＣ用于阻燃聚乙烯,在提高材料氧指数上优于未包覆者。