表面工程中膜基结合应力的线法分析

首次导出了平面问题两种介质分界线为离散线的线法基本方程;三维问题离散线分布于界面内的技法基本方程;并采用线法对拉伸法试验中膜基最大剪切应力问题进行了计算,指出了原有结果中的不足.     

火炮刹车性能的全静态检测

本又分析了影响火炮刹车性能的问题所在,并提出一种新的检测方法,使火炮在全静态条件下,检测各项静态参数、评价刹车系统的质量。     

导弹飞行试验外测系统误差的估计

在导弹飞行试验中,遥外测数据是进行精度和可靠性分析的依据。通常假定外测误差服从零均值正态分布,而在实际测量中,外测参数有可能带有系统误差,它的存在对飞行轨道和落点信息的获取都具有不利的影响。在一定的模型假设下,本文获得了外测系统误差的估计,并对一些仿真结果进行了初步分析。     

An exact analysis of a joint production‐inventory problem in two‐echelon inventory systems

We consider a two‐echelon inventory system with a manufacturer operating from a warehouse supplying multiple distribution centers (DCs) that satisfy the demand originating from multiple sources. The manufacturer has a finite production capacity and production times are stochastic. Demand from each source follows an independent Poisson process. We assume that the transportation times between the warehouse and DCs may be positive which may require keeping inventory at both the warehouse and DCs. Inventory in both echelons is managed using the base‐stock policy. Each demand source can procure the product from one or more DCs, each incurring a different fulfilment cost. The objective is to determine the optimal base‐stock levels at the warehouse and DCs as well as the assignment of the demand sources to the DCs so that the sum of inventory holding, backlog, and transportation costs is minimized. We obtain a simple equation for finding the optimal base‐stock level at each DC and an upper bound for the optimal base‐stock level at the warehouse. We demonstrate several managerial insights including that the demand from each source is optimally fulfilled entirely from a single distribution center, and as the system's utilization approaches 1, the optimal base‐stock level increases in the transportation time at a rate equal to the demand rate arriving at the DC. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Approximation methods for the analysis of a multicomponent,multiproduct assemble‐to‐order system

In this article, we consider the performance evaluation of a multicomponent, multiproduct assemble‐to‐order (ATO) system. Each component is managed independently using a base‐stock policy at a supply facility with limited production capacity and an infinite buffer. The arrivals of demands follow a multivariate Poisson process and unfilled demands are backlogged. Because exact analysis of the proposed system is not feasible, we propose two approximation methods which provide upper and lower bounds for various performance measures such as fill rate, average waiting time, and average number of backorders of the proposed system. Our computational experiments demonstrate the effectiveness of the two approximation methods under various system settings. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Multi‐period maintenance scheduling of tree networks with minimum flow disruption

We introduce a multi‐period tree network maintenance scheduling model and investigate the effect of maintenance capacity restrictions on traffic/information flow interruptions. Network maintenance refers to activities that are performed to keep a network operational. For linear networks with uniform flow between every pair of nodes, we devise a polynomial‐time combinatorial algorithm that minimizes flow disruption. The spiral structure of the optimal maintenance schedule sheds insights into general network maintenance scheduling. The maintenance problem on linear networks with a general flow structure is strongly NP‐hard. We formulate this problem as a linear integer program, derive strong valid inequalities, and conduct a polyhedral study of the formulation. Polyhedral analysis shows that the relaxation of our linear network formulation is tight when capacities and flows are uniform. The linear network formulation is then extended to an integer program for solving the tree network maintenance scheduling problem. Preliminary computations indicate that the strengthened formulations can solve reasonably sized problems on tree networks and that the intuitions gained from the uniform flow case continue to hold in general settings. Finally, we extend the approach to directed networks and to maintenance of network nodes. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Cyclic scheduling in robotic flowshops with bounded work‐in‐process levels

This study addresses cyclic scheduling in robotic flowshops with bounded work‐in‐process (WIP) levels. The objective is to minimize the cycle time or, equivalently, to maximize the throughput, under the condition that the WIP level is bounded from above by a given integer number. We present several strongly polynomial algorithms for the 2‐cyclic robotic flowshop scheduling problems for various WIP levels. © 2010 Wiley Periodicals, Inc. Naval Research Logistics 58: 1–16, 2011     

恒加试验下Pareto部件的可靠性分析

基于定数截尾试验,研究恒加试验下Pareto部件的可靠性分析问题。利用经典方法和Bayes方法,给出了部件参数的极大似然估计、Bayes估计和逆矩估计。验证了极大似然估计和Bayes估计的等价性。结合加速寿命方程,推导出Pareto部件的可靠度、失效率的估计值。最后,通过仿真比较与分析,建立了Pareto部件的可靠性评估方法。     

潜艇水动力噪声的自航模试验技术研究

探讨了一种新型的潜艇流噪声与螺旋桨噪声的模型试验方法——自航模水动力噪声测试技术。该方法通过合理的试验方案设计及信号处理手段,在背景噪声相对较低的测试环境中,可得到具有时间通过特性的噪声信号,识别出流噪声与螺旋桨噪声。     

The impact of component commonality on composite assembly policies

Assemble in Advance (AIA) policy reduces assembly cost due to advance planning, while Assemble to Order (ATO) policy eliminates assembly of excessive (more than demanded) units. The tradeoffs between the two policies have been studied in the past for single product environments. Moreover, it was shown that it is beneficial to employ AIA and ATO simultaneously. In this article, we study the employment of such a composite assembly policy in a multiproduct environment with component commonality. When common components are used, ATO may also enable us to benefit from the risk pooling effect. We provide important managerial insights such as: the multiperiod problem is myopic and changes in inventory levels due to the use of common components, and demonstrate the potential profit increase compared to other policies.© 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007