火箭助飞鱼雷发控及弹道仿真

针对水面舰艇反潜武器系统研制、火箭助飞鱼雷作战使用研究中对助飞鱼雷的仿真需求,重点研究了助飞鱼雷发射控制仿真方法和空中弹道仿真方法,突破了不同工况不同射程下发动机关机时间建模技术、保证大范围飞行一致性的火箭自适应控制器设计技术。应用表明,所形成的助飞鱼雷武器通道仿真模型能有效模拟助飞鱼雷从发射控制到弹道航行到命中目标的全过程以及作战效果,能够支撑助飞鱼雷发控算法研究以及作战使用研究。     

基于双滑模变结构的旋转靶弹双通道控制

针对旋转靶弹低空飞行姿态难以快速调整以及参数摄动的问题,基于内外环的双滑模变结构方法,设计了旋转靶弹的双通道控制器。基于非线性模型,对靶弹快速变化的攻角和侧滑角以及慢速变化的高度和偏航距离分别设计了一种积分型滑模面,并采用指数趋近律减轻系统的抖振,利用Lyapunov稳定理论证明其稳定性。非线性仿真结果表明,该设计控制方法能快速准确响应控制指令,且在参数摄动时表现出较强的鲁棒性。     

弹道导弹突防措施分析

简要介绍了弹道导弹面临的典型防御系统。针对该防御系统,提出了弹道导弹所能采取的典型突防手段,并将弹道导弹突防措施分为反侦察类突防和反拦截类突防两部分,介绍了反侦察类突防中的电子干扰、诱饵、隐身、助推段策略以及反拦截类突防中的加强防御策略、导弹机动发射与飞行、多弹头策略等。为研究弹道导弹突防技术提供参考。     

可变搜索区末制导雷达捕捉模型

反舰导弹远程化是一种发展趋势。但是随着射程的增加,反舰导弹自控终点的误差散布也增加,同时降低了目标捕捉概率,扩大末制导雷达搜索区域是解决该问题的一个途径,但这将降低末制导雷达的目标选择能力。选用可变搜索区末制导雷达是解决该矛盾的一种方法。在分析该模式末制导雷达搜索规律的基础上,建立了可变搜索区末制导雷达目标捕捉模型,为该模式末制导雷达目标捕捉概率的计算提供了一种较准确的方法。仿真结果显示该模型基本可信。     

导弹气动参数变化时PID与模糊控制的仿真

以参数大范围变化的导弹为研究对象,分别设计PID控制器和模糊控制器,并对PID控制器和模糊控制器组成的稳定回路进行仿真,仿真结果表明,PID控制器不能适应参数大范围的变化,表现为容易产生超调。简单模糊控制器对外界参数具有较好的适应性和鲁棒性,但存在稳态误差,通过采取模糊——积分并联混合,改善了模糊控制的稳态性能,提高了模糊控制的稳态精度。     

基于飞行时间的弹道导弹火力控制

为了达到最佳射击效果,弹道导弹突击目标时经常需要多枚导弹同时击中目标,因此根据飞行时间确定发射时间则成为弹道导弹火力控制问题的重要内容。以具体导弹为例,采用仿真的方法分析了影响飞行时间的内在原因,得出了明确的结论,使导弹部队能够根据飞行时间确定发射时间,从而合理地进行火力控制,提高毁伤效果和震慑力。     

多机空战系统的歼击机建模技术

分析了多机空战系统的顶层模型结构,给出了机载雷达、武器控制和导弹等三个主要部件的模型,可以将其应用于多机空战仿真系统的数学建模和软件设计中.     

导弹子母弹战斗部对复杂目标毁伤的计算机仿真

介绍了蒙特卡洛方法(Monte-Carlo)仿真的基本原理,并运用该方法对导弹子母弹战斗部对复杂目标毁伤进行研究,利用Matlab语言编制仿真程序实现了计算机仿真.有效地解决了其他方法计算繁琐的弊端,大大提高了毁伤仿真的计算效率.仿真结果表明应用该方法建模技术简洁,模型的通用性好,并能够随时根据需求进行功能扩展.     

A split target detection and tracking algorithm for ballistic missile tracking during the re-entry phase

In the re-entry phase of a ballistic missile, decoys can be deployed as a mean to overburden enemy defenses. This results in a single track being split into multiple track-lets. Tracking of these track-lets is a critical task as any miss in the tracking procedure can become a cause of a major threat. The tracking process becomes more complicated in the presence of clutter. The low detection rate is one of the factors that may contribute to increasing the difficulty level in terms of tracking in the cluttered environment. This work introduces a new algorithm for the split event detection and target tracking under the framework of the joint integrated probabilistic data association (JIPDA) algorithm. The proposed algorithm is termed as split event-JIPDA (SE-JIPDA). This work establishes the mathematical foundation for the split target detection and tracking mechanism. The performance analysis is made under different simulation conditions to provide a clear insight into the merits of the proposed algorithm. The performance parameters in these simulations are the root mean square error (RMSE), confirmed true track rate (CTTR) and confirmed split true track rate (CSTTR).     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.