调频脉冲信号辐射源多普勒信息提取方法研究

提出了一种基于单脉冲频率及频率变化率联合估计和多脉冲联合估计脉冲重复周期变化率的调频脉冲信号辐射源目标多普勒参数提取方法。该方法解决了无源定位系统数据采样频率与辐射源脉冲重复周期不匹配造成的频率偏差问题,在脉冲到达时间的提取上避免了对脉冲边沿的判断,使得利用中频采样信号计算脉冲重复周期成为可能。介绍对了该方法所采用的频率及频率变化率联合估计关键技术,并在此基础上讨论了该方法所能达到的理论估计精度及误差分析,最后通过仿真试验验证了该方法的可行性和有效性。     

溴乙烷制备实验的半微型化研究

在不影响溴乙烷正常产率的前提下,改变原料量和加料方法,设计出制备溴乙烷的半微型实验新方案,与常量制备法相比,具有节约药品,操作安全省时,污染小等优点,在教学实践中经反复检验,符合半微型化学实验要求,是值得推广的新实验方案。     

矩形波导结构潘尼管工作特性的分析

本文导出了一般TE_(no)模矩形波导结构潘尼管的色散方程,对潘尼管作了更明确的解释,并详细计算了TE_(20)模潘尼管的色散方程,得到其基波和第三次谐波同步谐振的色散曲线。该曲线表明,潘尼管在基波谐振上有1.5%的增长率,而在第三次谐波上有0.8%的平均增长率。此外,用非线性理论分析基波和第三次谐波同步谐振时的工作情况,给出了电子饱和时的电子分布图。在常直流磁场下优化结果表明,潘尼管在其次谐振时有51%的高效率和QP_w=9949.9MW 的输出功率,而在第三次谐振时有11%的效率和QP_w=1741.8MW 的输出功率。     

基于MPEG标准的多媒体网络传输效果分析与仿真

使用my Evalvid-NT仿真软件,选取封包延迟、画面延迟、封包抖动率和画面抖动率4个指标对多媒体网络的视频传输效果进行仿真。经过仿真计算后得到的可解画面比例与理论值非常接近。     

装备完好率要求和人才成长规律的维修任务分配方法

装备完好率是军事单位战备完好性水平的重要组成部分,人才的成长需要在实践中锻炼,针对我军装备维修任务分配难题,根据不同维修级别的情况,分析维修任务分配对装备完好率水平和人才成长的影响,提出基于装备完好率要求和人才成长规律的维修任务分配方法,建立了基于装备完好率要求和装备保障人才成长规律模型,此方法对于提高装备完好率水平和装备人才成长建设具有十分重要的意义。最后,用实例对方法的正确性进行了说明和验证,实例结果表明,该方法更贴近部队实际,对于部队的维修任务分配有重要的指导作用。     

通信误码率对浮标声纳系统DOA估计性能的影响

浮标声纳受到功耗、体积和硬件复杂度等因素的限制,通常将接收数据通过无线信道发送到终端设备进行处理。由于多径传播、衰落特性以及多普勒效应等众多因素的干扰,信号在无线通信传递中会产生误码并影响最终系统性能。针对复杂传输信道环境下的浮标声纳系统,研究了误码率对系统的多目标方位估计性能的影响,并通过计算机仿真给出了误码率允许的门限。     

4点弯曲载荷作用下残余应力与弹性模量比对涂层/基体材料界面能量释放率的影响

采用有限元计算方法研究了在4点弯曲载荷作用下,残余应力、涂层与基体的弹性模量比(简称弹性模量比)对涂层/基体材料界面能量释放率及其相角的影响。结果表明:能量释放率随着残余拉应力、弹性模量比的增大而增大;能量释放率中的相角也随着残余拉应力的增大而增大,但并不敏感,其随着弹性模量比的增大而减小。研究结果可为评价涂层/基体材料界面结合性能提供理论依据,有助于深化对涂层/基体材料界面结合性能的认识。     

扭曲尾翼飞行器气动特性数值研究*

为研究扭曲尾翼对飞行器气动特性的影响,引入扭曲率与平均攻角来表示尾翼的几何特征,通过求解旋转坐标系下的定常状态N-S方程,对十字型布局扭曲尾翼飞行器气动特性进行了数值仿真。结果表明：扭曲尾翼可以增加飞行器的滚转力矩和平衡转速,其平衡转速与扭曲率呈正比关系;随着扭曲率的增大,扭曲尾翼飞行器未转动时的阻力系数增大、平衡转速时阻力系数减小;在临界扭曲率以内,随着扭曲率的增加,飞行器平衡转速时翼面压力分布得到了有效改善,研究结果对于飞行器的气动构型设计及其飞行稳定性分析具有参考价值。     

Resource allocation with lumpy demand: To speed or not to speed?

In the classical EPQ model with continuous and constant demand, holding and setup costs are minimized when the production rate is no larger than the demand rate. However, the situation may change when demand is lumpy. We consider a firm that produces multiple products, each having a unique lumpy demand pattern. The decision involves determining both the lot size for each product and the allocation of resources for production rate improvements among the products. We find that each product's optimal production policy will take on only one of two forms: either continuous production or lot‐for‐lot production. The problem is then formulated as a nonlinear nonsmooth knapsack problem among products determined to be candidates for resource allocation. A heuristic procedure is developed to determine allocation amounts. The procedure decomposes the problem into a mixed integer program and a nonlinear convex resource allocation problem. Numerical tests suggest that the heuristic performs very well on average compared to the optimal solution. Both the model and the heuristic procedure can be extended to allow the company to simultaneously alter both the production rates and the incoming demand lot sizes through quantity discounts. Extensions can also be made to address the case where a single investment increases the production rate of multiple products. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

Properties of some stochastic orders: A unified study

The notions of the likelihood ratio order of degree s (s ≥ 0) are introduced for both continuous and discrete integer‐valued random variables. The new orders for s = 0, 1, and 2 correspond to the likelihood ratio, hazard rate, and mean residual life orders. We obtain some basic properties of the new orders and their up shifted stochastic orders, and derive some closure properties of them. Such a study is meaningful because it throws an important light on the understanding of the properties of the likelihood ratio, hazard rate, and mean residual life orders. On the other hand, the properties of the new orders have potential applications. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2004.