液氧甲烷膨胀循环变推力发动机系统方案对比研究

当前对液氧甲烷膨胀循环变推力火箭发动机的研制难点和关键技术认识不够清楚,尤其是在大变比推力调节方案方面。基于整个发动机系统,采用理论计算方法,探讨甲烷膨胀做功能力以及变推力调节方案可行性。分别给出了单涡轮系统方案和双涡轮系统方案,首次给出了不同工况下详细的系统状态参数分布,进行了对比分析,并探讨了甲烷做功能力随室压的变化规律。研究结果表明,甲烷做功能力随着室压的减小呈现先减小后增大的趋势,单涡轮和双涡轮系统方案均能够实现大范围推力调节;相比单涡轮方案,双涡轮方案能够更好地保证混合比,且甲烷气体做功能力利用效率更高,氧涡轮和燃料涡轮功率变化范围较窄,涡轮所处环境较为缓和,因此双涡轮系统方案具备一定优势。     

Analysis on MAV/UAV cooperative combat based on complex network

A formation model of manned/unmanned aerial vehicle (MAV/UAV) collaborative combat can qualitatively and quantitatively analyze the synergistic effects. However, there is currently no effective and appropriate model construction method or theory, and research in the field of collaborative capability evaluation is basically nonexistent. According to the actual conditions of cooperative operations, a new MAV/UAV collaborative combat network model construction method based on a complex network is presented. By analyzing the characteristic parameters of the abstract network, the index system and complex network are combined. Then, a method for evaluating the synergistic effect of the cooperative combat network is developed. This method provides assistance for the verification and evaluation of MAV/UAV collaborative combat.     

The effects of information on a queue with balking and phase‐type service times

This article generalizes the models in Guo and Zipkin, who focus on exponential service times, to systems with phase‐type service times. Each arriving customer decides whether to stay or balk based on his expected waiting cost, conditional on the information provided. We show how to compute the throughput and customers' average utility in each case. We then obtain some analytical and numerical results to assess the effect of more or less information. We also show that service‐time variability degrades the system's performance. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

连续波DF/HF化学激光器喷管中氟原子复合计算

氟原子是连续波DF/HF化学激光器泵浦反应的重要参与者,其浓度分布尤其直接影响冷反应型激光器的泵浦效率及激射强度.在参与反应之前,氟原子将受到三体复合和壁面复合因素的影响而部分复合为氟分子.研究该因素对氟原子浓度的影响对激光器的分析优化是十分重要的.已有一定的实验方法可对其浓度进行测量研究,并建立了理论模型描述.将其与计算流体力学方法相结合对氟原子分布进行计算,研究了该方法的有效性,并对不同收缩段型面下氟原子复合进行了计算研究.     

基于先验信息的分布式星载单基线SAR/ATI方法

在综述了分布式星载SAP/ATI技术的基础上,阐述了单基线SAP/ATI技术的原理和杂波、噪声对检测、测速性能的影响,给出了一种基于先验信息的单基线SAR/ATI检测和测速方法,最后基于多功能的天基雷达仿真系统进行了仿真实验和性能分析.     

改性C/C复合材料快速制备与抗烧蚀性能考核

采用液相浸渍法结合反应熔渗法快速制备改性C/C复合材料,研究其微观组织及在氧乙炔焰和高频等离子体风洞环境中的烧蚀行为。结果表明:改性C/C复合材料主要含有Hf C,Zr C,Ta C等高熔点陶瓷改性相,其密度为3.83 g/cm3,开孔率仅为4.71%。氧乙炔焰烧蚀360 s后,改性C/C复合材料表面形成一层主要由Hf O2,Zr O2,Ta2O5组成的致密氧化物层,材料的线烧蚀率为0.005 18 mm/s。使用高频等离子体风洞考核改性C/C复合材料球头模型,在热流量3.5 MW/m2、驻点温度2293℃的条件下考核180 s后,模型表面生成致密光滑的氧化物保护层,与基体结合牢固,模型形状及尺寸无明显改变,去掉氧化物后测得其线烧蚀率为0.001 72 mm/s。     

Lot sizing with learning and forgetting in setups: Analytical results and insights

This article considers the dynamic lot sizing problem when there is learning and forgetting in setups. Learning in setups takes place with repetition when additional setups are made and forgetting takes place when there is a break between two successive setups. We allow the amount forgotten over a break to depend both on the length of the break and the amount of learning at the beginning of the break. The learning and forgetting functions we use are realistic. We present several analytical results and use these in developing computationally efficient algorithms for solving the problem. Some decision/forecast horizon results are also developed, and finally we present managerial insights based on our computational results. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 93–108, 2016     

应用镁金属化学还原法制备多孔Si/Si-O-C负极材料机理研究

以二乙烯基苯和聚硅氧烷为原料经先驱体转化法制备Si-O-C材料,利用镁金属在惰性气氛保护下高温还原制备多孔的Si/Si-O-C负极材料。利用X射线衍射、能谱分析、元素分析和场发射扫描电镜分析多孔Si/Si-O-C负极材料的组成、结构、形貌,从而研究利用镁金属化学还原法制备多孔Si/Si-O-C负极材料的机理。结果表明,镁金属在还原过程中生成MgO和Mg_2SiO_4等产物,经HCl洗涤后可形成多孔的Si/Si-O-C负极材料。Si/Si-O-C材料中的单质硅分布于多孔的Si-O-C相中,一定程度上可缓解Si在循环过程中产生的体积效应。利用镁金属还原Si-O-C材料制备多孔Si/Si-O-C材料是一种可行的制备方法。     

两道同侧扫掠激波作用下形成的三维平板边界层

为探索一种减弱扫掠激波/边界层干扰强度的侧压方式,采用数值计算方法研究两道同侧扫掠激波作用下形成的三维平板边界层。对三维边界层的流动机理进行研究,并与相同气流偏转角的一道扫掠激波作用下形成的三维边界层进行定量比较。研究表明,存在两道同侧扫掠激波时,第一道扫掠激波使侧壁附近边界层变薄,进而使第二道扫掠激波与再附形成的边界层的相互作用减弱,从而总的效果是两道扫掠激波与边界层的相互作用强度比一道扫掠激波的弱;两道扫掠激波的气流总偏转角与一道扫掠激波的相同,相交后汇聚成的激波强度与一道扫掠激波的基本相同,之前被两道扫掠激波"扫"起来的边界层在汇聚激波作用下还呈现锥形流动,分离线和来流的夹角也与一道扫掠激波的基本相同。     

DS/FH信号跟踪的频率相位修正技术

直序/跳频(direct sequence/frequency hopping, DS/FH)扩频信号的跟踪受到多普勒效应和电离层效应的严重影响,使其难以应用于卫星导航的抗干扰领域。为了解决该问题,提出将递归最小二乘滤波修正的方法应用在DS/FH信号跟踪上。将处于不同通道中心频率的多普勒频率估计转化到DS/FH信号的整体中心频率进行并滤波,在频率捷变时对载波数控振荡器进行修正。根据对频率跳变前后载波相位和码相位突变的观察,实时估计电离层的电子密度,在频率捷变时修正载波相位和码相位。仿真实验证明,所提方法能够有效地消除DS/FH信号跟踪中的频率相位不连续问题,其跟踪精度与直序扩频信号度基本是相同量级。