PIP工艺制备的C/SiC复合材料的氧化行为

PIP工艺制备的C/SiC复合材料中SiC基体富碳,因此增强体和基体均容易氧化。碳纤维和无涂层保护C/SiC复合材料试样在400~1300℃的氧化速率随温度升高而加快,低温为反应控制,高温为扩散控制。CVD-SiC涂层保护C/SiC复合材料和由CVD-SiC层、自愈合层、CVD-SiC层三层涂层保护C/SiC复合材料在400~1300℃的氧化先随温度升高而加快,然后减慢。三层涂层在800~1300℃有非常好的保护效果。扫描电镜照片显示自愈合层的玻璃态物质进入涂层裂纹中,填充裂纹且阻挡氧的通过,从而有良好的抗氧化保护效果。     

一种具有优先级的MAC协议性能分析

在移动通信中,为了满足高动态终端对接入的高要求,设计了一种带有优先级的随机预约/按需分配相结合的MAC协议RRDAMA-P(random reserve/demand assignment multiple access protocol with priority),并利用Opnet软件进行了建模仿真,仿真结果表明,RRDAMA-P协议不仅可以满足终端的优先级要求,而且实现了更好的吞吐量和时延性能。     

Production/distribution system design with inventory considerations

This study addresses the design of a three‐stage production/distribution system where the first stage includes the set of established retailers and the second and third stages include the sets of potential distribution centers (DCs) and potential capacitated suppliers, respectively. In this problem, in addition to the fixed location/operating costs associated with locating DCs and suppliers, we consider the coordinated inventory replenishment decisions at the located DCs and retailers along with the appropriate inventory costs explicitly. In particular, we account for the replenishment and holding costs at the retailers and selected DCs, and the fixed plus distance‐based transportation costs between the selected plants and their assigned DCs, and between the selected DCs and their respective retailers, explicitly. The resulting formulation is a challenging mixed‐integer nonlinear programming model for which we propose efficient heuristic solution approaches. Our computational results demonstrate the performance of the heuristic approaches as well as the value of integrated decision‐making by verifying that significant cost savings are realizable when the inventory decisions and costs are incorporated in the production distribution system design. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 172–195, 2012     

栅格数据处理中邻域型算法的并行优化方法

随着并行计算的成熟,众多数据密集型的栅格处理算法亟需利用并行计算来缩减执行时间.针对其中一类邻域型算法,构建了用于估计是时间代价的串行/并行时域模型,分析了各个组成的代价影响因素,提出了降低数据I/O代价的并行I/O方法和降低数据通信代价的光圈预测方法.实验证明,所提的两个优化方法可以使邻域型栅格处理算法的并行程序更加充分地利用并行计算资源,进而在一般并行化的基础上进一步提升其并行性能.     

聚钛碳硅烷的新合成法及其研究

从聚硅烷(PS)与钛酸丁酯。(Ti(OBu)_4)出发,不采用任何反应促进剂直接合成了含钛碳化硅纤维的先驱体聚钛碳硅烷(PTC)。在这一反应中,PS 首先裂解成含Si—C 骨架与Si—H 键的低分子聚硅烷(LPS)。然后,由LPS 中的Si—H 键与Ti(OBu)_4的反应以及LPS 的Si—Si 骨架裂解转化为Si—C 骨架的反应制得了PTC.本文对这种新合成法所涉及的反应过程进行了研究,并比较了新旧两法得到的PTC—1与PTC—Ⅱ的结构异同,报告了以新法制得的PTC—Ⅱ为先驱体得到的含钛碳化硅纤维的优良性能。     

Probabilistic analysis of an asymptotically optimal solution for the completion time variance problem

Scheduling a set of n jobs on a single machine so as to minimize the completion time variance is a well‐known NP‐hard problem. In this paper, we propose a sequence, which can be constructed in O(n log n) time, as a solution for the problem. Our primary concern is to establish the asymptotical optimality of the sequence within the framework of probabilistic analysis. Our main result is that, when the processing times are randomly and independently drawn from the same uniform distribution, the sequence is asymptotically optimal in the sense that its relative error converges to zero in probability as n increases. Other theoretical results are also derived, including: (i) When the processing times follow a symmetric structure, the problem has 2^{⌊(n−1)/2⌋} optimal sequences, which include our proposed sequence and other heuristic sequences suggested in the literature; and (ii) when these 2^{⌊(n−1)/2⌋} sequences are used as approximate solutions for a general problem, our proposed sequence yields the best approximation (in an average sense) while another sequence, which is commonly believed to be a good approximation in the literature, is interestingly the worst. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 373–398, 1999     

微机上运行的多功能仿真语言GASP/PC

文中介绍了IRM-PC机上多功能仿真软件GASP/PC的开发,叙述了GASP/PC仿真语言的形成以及对于连续、离散和复合仿真模型的GASP/PC语言的结构与仿真方法。     

电磁轨道发射中内弹道动力响应特性分析

将轨道简化为移动载荷作用下固定在弹性支撑上的Bernoulli-Euler梁,通过静态电磁-结构耦合有限元模型求得外围封装的等效刚度,计算得到发射器的临界速度。另外,利用混合有限元/边界元法建立电磁-结构-运动多物理场耦合的动力学模型,求得枢轨动态接触压力和轨道的应力应变分布特性。通过在轨道背面布置光纤光栅应变传感器,利用测量数据验证了动力响应特性,并分析了弹丸在内弹道的稳定性。针对典型30 mm × 30 mm矩形口径发射器,分析及试验结果表明：C型电枢对轨道的电磁挤压力在平顶沿起始时刻达到最大值,之后随着时间推移逐渐减小;电枢通过引起的应力波在高速段容易与轨道中反射应力波发生共振,并且轨道在电枢运动的中间高速段区域受力最为集中,应力集中水平约是起始低速段区域的2.44倍;电枢运动高速段会出现晃动现象,进而引起上下轨道受力的不对称性。分析及试验结果对研究电磁轨道发射器内弹道动力响应特性和发射器结构设计具有重要指导意义。     

新体制导航信号下I/Q幅相不一致对接收机测距零值的影响分析

随着现代化导航信号带宽的增大,由于可以大幅降低采样率,复信号采样的优势日趋明显。由于存在I/Q幅相误差,复信号采样对导航接收机伪距测量造成了一定影响。改进了信道非理想与I/Q幅相误差共同影响BPSK/QPSK信号零值测量的分析模型;在该模型基础上,推导得到了任意I/Q误差和信道非理想特性影响BOC信号伪距零值的模型;探讨了二者在频域抗干扰应用场景下引起的零值变化;理论分析与软件接收机仿真结果高度吻合,误差在1.5×10^-4码片内,证明了分析模型的精确性。该分析方法可用于对高性能导航接收机信道特性进行事先约束及筛选,以确保干扰场景下的零值变化满足要求。     

火控系统随动系统动态仿真库的构建

以陆军火控系统中的随动系统为研究对象 ,按照随动系统的类型利用 MATL AB/ SIMU L INK建立了一个随动系统的动态仿真库。该仿真库的建立 ,为对随动系统进行分析、研究和比较同类系统的性能提供了一个软件平台。同时 ,利用它对新提出的一些改进算法和设计方案进行验证 ,为新型号随动系统的设计提供了可靠的参考依据