From the Editors

Israel's policy of military reprisals has never seemed to follow any consistent pattern of tit‐for‐tat. On the one hand, not every violent incident was answered with a counterattack. On the other hand, when Israel responded, frequently it employed an excessive amount of force, which was disproportional to the Arab provocation. This behavior has not been the consequence of a premeditated and rational strategy. Instead, it appears to have been the result of a political dispute between alternative approaches regarding the use of military force. The following research analyzes the development of this controversy and how these differences of opinion were resolved.     

The unnecessary uprising: Jeju Island rebellion and South Korean counterinsurgency experience 1947–48

This paper systematically analyzes the causes of the escalation of violence during the initial stages of the Jeju Island Rebellion and the failure of South Korean counterinsurgency operations. It is argued that four interrelated factors provided the conditions for armed insurgency in the small island of Jeju: inter-agency tension between the Korean National Police (KNP) and the Korean Constabulary; the mainlanders' misinterpretation of the insurgency; the effect of systematic police brutality; and the role of youth groups. Consequently, two counterinsurgency lessons will be drawn from this study: that inter-agency cooperation and coordination at the tactical level between security branches and the incorporation of local population at the micro-level is essential in conducting efficient and effective counterinsurgency operations.     

燃烧加热型煤油加热器工作特性试验

针对冲压发动机地面试验应用需求,设计了基于燃气加热方式的煤油加热器,通过试验的方法研究了多个因素对其工作特性的影响规律。研究结果表明,该煤油加热器加热能力强,响应时间短,可在线制备超临界/裂解态煤油;其中,燃气温度、流量和煤油流量是影响煤油加热器工作特性的主要因素,通过控制燃气温度和流量可以大范围调节煤油温度,能满足冲压发动机不同试验工况的应用需求。     

基于HLA的防区外空面导弹攻防对抗仿真

针对HLA/RTI在接口规范、对象模型模板等关键技术建立分布式仿真平台的复杂性,提出了利用数字武器开发平台进行开发的方法,构建防区外空面导弹攻防对抗系统体系结构,实现了该体系结构联邦成员划分、设计联邦/仿真对象模型表等HLA仿真关键技术,并采用面向对象建模与仿真技术建立了各联邦成员的数学模型.该仿真结果表明,各联邦成员的数学模型与底层支撑环境能够相互分离,仿真模型具有良好的交互性和互操作性,可通过添加或删除联邦成员仿真不同的复杂战场想定,并可作为验证不同算例的仿真平台.     

Investigation of the shock compression behaviors of Al/PTFE composites with experimental and a 3D mesoscale-model

The responses of AI/PTFE reactive materials (RMs) under shock compression were investigated by a single-stage gas gun.A 3D mesoscale-model was established based on micro-computed tomography(micro-CT) slice images and confirmed with experimental results.In the high-pressure stage,the com-posites reacted partially,whereas there were no deviations between the partially reacted Hugoniot and the inert simulation results.The simulation reveals that the Teflon matrix melting on the high shock pressure.Melts and decomposition of the PTFE accelerated the diffusion of the atoms.Thus,the reactions of the Al/PrFE composites are more like a combustion rather than a detonation.     

Investigating the Desirability of Navy Aircraft Service Life Extension Programs

Building on prior work on optimal replacement of aging aircraft, this paper presents three methodologies to evaluate prospective aviation Service Life Extension Programs (SLEPs) and applies these methodologies to US Navy F/A-18E/F data. While considerable uncertainty remains as to the values of key parameters (e.g. the cost of F/A-18E/F SLEPs), the preponderance of the evidence available at this juncture favors undertaking SLEPs on F/A-18E/Fs rather than replacing them with new Joint Strike Fighters.     

基于FEM/SPH算法的弹丸侵彻土体数值模拟

基于有限元法(FEM)和光滑粒子流体动力学(SPH)结合的算法,用数值模拟了钢质弹丸对钢筒约束土体的侵彻过程。基于ANSYS/LS-DYNA显式动力分析和LS-PrePost后处理软件,形象再现了钢质弹丸冲击作用下土体飞溅形成漏斗坑和直线通道的物理过程。侵彻深度计算结果与实验数据吻合较好,钢质弹丸的速度和加速度时程曲线图与理论分析一致,体现了FEM/SPH算法的精确性。研究结果表明FEM/SPH算法在模拟侵彻土体方面具有可行性和有效性。     

N2O/C7H8单喷嘴燃气发生器试验研究

以基于N2O/C7H8的燃烧驱动混合型气动CO2激光器点火试验为研究背景,设计了液态N2O供应系统及N2O/C7H8单喷嘴燃气发生器.对液态N2O供应系统、N2O/C7H8的点火及燃烧性能进行了研究.试验结果表明:设计的N2O供应系统能够实现液态N2O的稳定供应;在设定的时序下,两个设计工况(余氧系数分别为0.3和0....     

金属橡胶／橡胶复合叠层耗能器试验建模研究

采用电液伺服材料试验机的位移加载方式,对金属橡胶／橡胶复合叠层耗能器进行动态试验研究,结果表明：耗能器的恢复力同时受频率和振幅的影响具有非线性迟滞特性。在此基础上,结合理论分析建立耗能器的动力学模型,提出一种参数分离识别法,辨识出模型中的未知参数。将辨识结果与试验曲线进行对比,结果表明,所建模型可靠,且参数识别精度能够满足工程应用的要求。     

氘-金碰撞中J/ψ产生截面随x_F变化的研究

在不同碰撞质心能量下对氘-金(d-Au)碰撞中J/ψ核吸收效应进行了研究,结果表明,在不同碰撞质心能量下J/ψ核吸收截面随动量分数xF变化趋势明显不同。利用以上结论,计算了美国相对论重离子对撞机(RHIC)能量下J/ψ在氘-金(d-Au)碰撞中与质子-质子(p-p)碰撞中的产生截面比,并与实验数据比较发现,理论结果能很好的解释实验现象。最后,为欧洲大强子对撞机(LHC)实验作了理论预言,理论结果将为即将运行的LHC实验所检验。