新型PBL键外包钢-混凝土组合梁抗弯承载力简化计算

基于理论分析,建立了新型PBL键外包钢-混凝土组合梁抗弯承载力计算的基本假定和计算模型,推导出组合梁抗弯承载力的简化计算公式,并采用有限元分析软件ANSYS14.5对组合梁进行了非线性有限元分析.对比分析表明:新型PBL键外包钢混凝土组合梁抗弯承载力的试验值、简化计算值和模拟分析值吻合较好.     

LCDP SO算法在协同空战攻击决策中的运用?

为了探索提高协同空战攻击决策算法性能的途径,将多子群粒子群优化理论用于求解协同空战攻击决策,利用生命周期粒子群模型（ LCPSO）,提出了一种生命周期离散粒子群（ LCDPSO）协同空战攻击决策算法。基于典型空战想定背景,仿真验证了算法的有效性。通过统计实验的方法,分析比较了LCDPSO协同空战攻击决策算法与多种智能决策算法的准确性、可靠性和快速性,研究结果证明LCDPSO协同空战攻击决策算法优良的综合性能。     

轴向剪切条件下功能梯度圆柱形复合材料的界面开裂问题研究

针对外覆功能梯度涂层的圆柱形复合材料在轴向剪切作用下的界面开裂问题,建立了断裂力学分析的理论模型。运用分离变量和无穷级数法,推导了奇异积分方程;利用Lobatto-Chebyshev配点法将其离散为代数方程组,最后得到了应力强度因子的数值解。对数值结果的讨论表明:在涂层外表面固定的条件下,可以通过降低涂层厚度和设计内侧软而外侧硬的涂层2种途径来有效地减小界面的断裂驱动力。研究结果可为工程中该类复合材料的防断裂优化设计提供理论参考。     

基于DMFT的空间目标微动特征提取

空间目标的高速轨道运动,会导致微动曲线的展宽和走动,将对后续的微动特征提取产生不利影响。针对这一问题,提出了一种基于离散匹配傅里叶变换(DMFT)的空间目标微动特征提取方法。首先分析了高速空间目标的信号回波模型;其次,根据回波信号的特点提出了一种基于DMFT的补偿参数估计的方法;最后,采用Hough变换提取了目标的微动特征。仿真实验验证了该方法的有效性和鲁棒性,结果表明微动特征的提取精度得到了明显提高。     

基于复杂网络的作战同步建模与优化

为了量化分析作战同步问题,提出多作战单元协同作战复杂网络模型,在此基础上,应用复杂网络同步理论,重点从作战单元动力学行为和网络拓扑结构两个方面对作战同步的内在机理进行分析。针对不同的作战情形,设计了静态同步和动态同步两种网络,并分别应用离散粒子群算法对网络结构进行优化。对网络抗毁性的仿真实验表明两型网络对随机攻击和恶意攻击均具有较好的鲁棒性。     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

爆炸复合接头剪切强度测试方法研究

参照正交各向异性层压复合板层间剪切强度的测试方法,提出了用于测试爆炸复合接头复合界面剪切强度的3种方法;并建立三维有限元模型,分别对3种测试方法进行模拟;最后分别对3种方法进行了测试试验.结果表明,3种试验方法均能有效测试爆炸复合接头的剪切强度,其中对称试件双切口拉伸法最适合实际应用.     

一类差分方程的三点边值问题的正解

研究了一类离散型三点边值问题:Δ2y(k-1) a(k)f(k,y(k))=0,k∈N={1,2,…,T},Δy(0)=0,y(T 1)=βy(l),式中:f是变号的,l∈N1={2,3,…,T-1},T∈{3,4,…}。应用双锥上的不动点定理,得到了至少存在两个正解的充分条件,并给出了上述边值问题的Green函数。     

大口径穿甲弹用材料应用研究动态及分析

为了提高穿甲弹的威力,有效对抗新型防护装甲和防护技术,对现有提高大口径穿甲弹穿甲威力的技术途径进行了分析,得出了弹芯材料和弹托材料的力学性能是制约穿甲威力提高的关键因素。详细阐述了目前国内外在大口径穿甲弹用弹芯材料的强韧化、绝热剪切敏感性,新型复合材料弹芯的研究和轻质弹托材料的应用研究动态,并对研究中存在的问题进行了分析。最后,对我国大口径穿甲弹用材料的研究工作进行了展望。