Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.     

次级通道估计误差对Fx-Newton算法的影响

Fx-Newton算法在执行过程中需要估计次级通道模型,针对主被动隔振工程应用中次级通道估计存在误差的问题,假设输入信号为正弦信号,建立含次级通道估计误差的Fx-Newton算法结构模型,推导了Fx-Newton算法的稳定性条件,并就相位误差和幅值误差对Fx-Newton算法稳定性和收敛性的影响做了详细阐述。最后对两自由度主被动隔振模型开展仿真研究,验证了理论分析结果。     

Bringing Military Conduct out of the Shadow of Law: Towards a Holistic Understanding of Rules of Engagement

In this article, I outline a holistic approach to the military concept of “Rules of Engagement” (ROE), which complements the legal aspects of ROE with considerations of operational and political requirements for the use of military force. Drawing upon two illustrative cases from the US military experience with the use of ROE, I demonstrate that ROE for any particular military operation should be formulated to balance optimally, if not harmonize fully, the legal, operational and political concerns related to the use of force. In this task, political decision-makers and military practitioners alike are confronted with unavoidable and real-life dilemmas. How these dilemmas are handled has significant implications for how legal requirements concerning accountability and concerns for civilian lives in military combat can be preserved through ROE.     

多轮次打击情况下的跑道失效率计算

对机场跑道进行多轮次打击时,每轮打击之后对跑道失效率的计算可掌握是否达到预期打击目的,为下一轮打击提供决策依据.以马尔科夫链为理论依据对多轮次打击情况下的跑道失效率进行计算,只需计算出跑道失效率的一步转移概率矩阵,即可求出任意多次打击后跑道的失效率,避免了采用常规方法时的多层迭代计算,降低了多次打击计算的难度.实例证明,该方法具有运算速度快、精度高的特点,可用于多轮次打击情况下的跑道失效率计算问题.     

基于SINS/GPS组合导航的AUV半实物仿真系统设计(英文)

为了满足水下航行远航程和长时间的要求,远航程自主水下航行器(AUV)采用的是以SINS导航为主、卫星导航定期修正的方式,以提高导航的精度和可靠性.设计一种采用GPS卫星定位导航模拟器、GPS接收机、惯性测量器件(IMU)和实时仿真计算机构成的采用SINS/GPS组合导航方式的AUV导航半实物仿真系统,并对该系统的硬件接口设计、算法和软件开发进行了论述.所开发的系统通过外部的线运动补偿实现了惯性导航系统的完整计算,通过时间同步策略解决了各导航子系统的并行同步问题.部分仿真试验的结果表明,所设计的半实物仿真系统方案可行,可用于更高置信度的AUV组合导航仿真实验.     

运动目标轨迹分类与识别

运动目标轨迹识别是运动分析中的基本问题,其目的是解释所监视场景中发生的事件,对所监视场景中运动目标轨迹的行为模式进行分析与识别,智能地做出自动分类.对轨迹有效性判断后采用K均值聚类,引入改进的隐马尔可夫模型算法,针对轨迹的复杂程度对各个轨迹模式类建立相应的隐马尔可夫模型,利用训练样本训练模型得到可靠的模型参数,计算测试样本对于各个模型的最大似然概率,选取最大概率值对应的轨迹模式类作为轨迹识别的结果,对两种场景中聚类后的轨迹进行训练与识别,平均识别率较高,实验结果表明该方法是有效的.     

基于免疫粒子群算法的自抗扰飞行控制器设计

提出了一种基于免疫粒子群优化算法的自抗扰大包线飞行控制器设计方法.针对传统的增益调参设计方法存在的工作量巨大与设计效率低的问题,利用自抗扰控制器进行大包线飞行控制器设计,并推导了适用于该方法的飞机非线性方程.由于自抗扰控制能够动态补偿对象模型的内扰和外扰,因此在很大的飞行区域内仅需一套控制器便可,从而避免了烦琐复杂的增益调参设计过程,并用免疫粒子群优化算法对自抗扰控制器参数进行了优化研究.仿真结果表明,所设计的自抗扰控制器具有优良的控制性能,并且控制器参数在较大的包线范围内不需要改变,从而简化了大包线飞行控制器设计.     

卫星活动部件的干扰辨识与抑制

采用干扰辨识的方法实现带活动部件三轴稳定卫星的高精度姿态控制问题.首先以扫描镜为例进行,分析扫描镜运动对卫星产生的等效干扰力矩;然后根据卫星控制系统的稳态输出数据,采用特征系统实现算法对扫描运动产生的干扰频率进行闭环辨识;最后在所辨识干扰频率的基础上,采用偶极子干扰抑制滤波器消除扫描镜运动干扰对卫星姿态的影响.仿真结果表明,所提出的方法能有效地克服活动部件运动产生的未知干扰对卫星姿态稳定度的影响,提高在轨运行卫星的姿态控制精度.     

基于ADC的炮兵激光观测仪侦察效能分析

运用了效能分析方法,针对复杂战场环境下炮兵侦察系统的效能进行分析,特别是炮兵激光观测仪,揭示其内在规律,为提高现有侦察装备的作战效能找到重要途径,也为指挥员的决策提供可靠的战略支持.在侦察系统效能分析理论的基础上,对典型的激光观测仪侦察装备进行了计算评估验证,其方法和成果可供其他武器系统效能评估时借鉴参考.     

固定式超近程防护系统优化设计及统计分析

为了提高固定式超近程防护系统的拦截效率,进一步优化攻击单元的分布参数,将分布方案的分布参数5个射角和35个射向作为自变量,以拦截概率作为因变量,将已有的32种方案的分布方案及统计模拟所得的拦截概率作为样本值,运用SPSS软件进行多元线性回归分析,通过不断筛去显著性比较差的变量,最终得到比较满意、显著性比较强的多元线性回归方程,该方程的建立为进一步优化分布方案的参数提供了理论依据,也为建立进一步优化模型提供了理论基础.