Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.     

A novel variable topology design for a multi-flexible ejection mechanism

The airborne missile launch mechanism often subjects to significant deformations induced by the large ejection force during high-speed actuations in missile ejection process, leading to a substantial deviation of separation parameters from designed values that threats safety of the carrier. This study proposes a novel variable topology design for launch mechanism, achieved via a Prismatic-Revolute-Revolute pair (PR-R) motion formed by the structural gap with a specific direction. It enables launch mechanism variability during missile ejection process and optimizes the ejection force given by the front and back ejection arms, and greatly optimizes the separation parameters during missile ejection. The kinetics simulation analysis is conducted under working conditions of the original ejection mechanism and the novel mechanism with variable topology design, respectively. The results show that the novel variable topology design is more befitting for the launch process in terms of system safety and controllability, effectively improving the separation posture, restraining the flexible effect of the mechanism, and fulfilling the effectiveness of the design value of multi-rigid body.     

Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

原始变量守恒形式控制方程的时间准确性分析

基于压力、速度和温度的原始变量为自变量的守恒形式的控制方程可应用于定常流动问题,但是在求解非定常问题,例如某一典型激波管问题时,激波后温度出现过冲现象,即使通过细化网格、提高空间格式精度或者换用其他通量格式仍不能消除,这表明误差可能来自该方法本身。采用一维Euler方程对该方法进行数值分析。分析结果表明,数值误差来自时间项。通过构造相应的双时间步方程,虚拟时间项采用原始变量,而物理时间项采用守恒变量,并在两个相邻物理时间步内作为定常问题求解,可以收敛到相应的守恒形式,消除上述误差,得到准确的非定常数值解。     

一种新型SEU/SET加固鉴频鉴相器设计

分析验证了传统D触发器型PFD结构的SEE敏感性,提出了一种新型的SEU/SET加固鉴频鉴相器,SPICE模拟结果表明该结构功能正确,对于1GHz的时钟信号,鉴频鉴相的精度可达0.8rad.锁相环的整体模拟结果表明,抗辐照的PFD与传统的PFD相比,锁相环的电学性能没有改变,锁定时间保持一致.对传统D触发器型PFD和设计加固的PFD进行了遍历轰击模拟,结果显示,提出的抗辐照PFD加固效果非常明显,敏感节点的数目可以降低80%左右.     

YHFT-DX高性能DSP中Cache失效流水设计

YHFT-DX是国防科技大学自主研制的一款高性能DSP.以提升YHFI-DX的 Cache 性能为目标,研究了降低 Cache 失效延迟的优化策略,设计并实现了一种针对高频高性能DSP的一级数据Cache优化策略--失效流水.与传统优化策略相比,该策略将连续访问Cache的失效请求并进行流水化处理,使多个Cache失效延迟重叠,从而达到降低平均Cache失效代价的目的.将该策略应用到YHFT-DX芯片的一级数据Cache控制器的设计与优化中,使访问Cache失效引起的流水线停顿从8拍降为2拍,显著提升了系统性能.     

室温工作的单电子晶体管研究

由于具有低功耗、高速度、高集成度等优点,单电子晶体管成为最有前景的纳米电子功能器件之一.但是,由于结构上的特殊性,单电子晶体管只能在低温下正常工作,该特性限制了其实用化进程.因此,研究可在室温下工作的单电子晶体管具有重要意义.在分析单电子晶体管工作机理的基础上,计算了单电子晶体管室温工作的基本条件,并实验制备出了样片.测试结果表明,所制备的单电子晶体管可在室温下表现出库仑振荡等基本特性.该研究成果将为单电子晶体管的集成实用化打下良好的基础.     

计算流体动力学在隧道安全中的应用

总结分析了近年国内外重大隧道火灾事故,简述了隧道火灾的特点、危害性及其烟气控制方法,回顾了国内外对隧道火灾的研究现状。着重介绍了计算流体动力学（CFD）在隧道通风安全中的应用。同时总结了国内外在研究隧道火灾方面应用CFD模拟所作的一些基本工作,并描述近来在隧道安全工程的一些典型应用。     

相变温控混凝土相变储热性能试验研究

混凝土中加入相变材料之后对水化反应产生的热量有一定的吸收,从而对混凝土内部温度有一定的控制作用,这将减少混凝土温度裂缝产生的几率.通过筛选带一定结晶水的硬脂酸、月桂酸和正十二醇的3种有机相变材料,模拟实际大体积混凝土工程来研究不同相变材料的掺量、控温效果.运用计算机软件绘制时间一温度曲线,从中搜寻出最佳的相变材料掺量.     

管道瞬态激振响应管长的计算

在水击压力波沿管道传播的过程中,遇到内部流场边界时,就会对管道产生激振响应,从而引起管道的振动。针对管道的激振响应,分别从水击波的简化模型和考虑管道和流体相互作用的固液耦合模型,推导了管道瞬态激振响应中的激振部件间隔管长计算公式,分析比较了简化模型和耦合模型的不同,并且提出一些防止共振的方法。