基于仿真和熵权的VOIP业务网络性能评价权重确定方法

针对目前网络性能评价中多元指标之间权重难以确定的问题,将信息熵理论应用于网络性能评价中.提出采用熵权方法确定指标权重,进而对网络性能进行评价的方法.为了获取反映不同网络状态的性能数据,采用网络仿真方法获得计算熵权所需的样本.实例表明,信息熵能够客观地反映各指标贡献信息量的大小,基于信息熵的熵权能够客观反映各指标的相对重要程度.     

提高我国坦克防护能力的思考

分析了现代战场条件下坦克生存面临的重要威胁,强调了加强坦克主动式防护系统研究的重要性,并提出了加强我军坦克主动式防护系统的研究应遵循的原则和技术途径。     

金属复合板的消防安全性能探讨

随着我国科技进步及建筑节能需要,特别是近年钢结构建筑体系的推广,金属复合板得到迅猛发展。从分析金属复合板的材料性能和火灾特点入手,就工程施工、使用过程中存在的消防安全问题及防范措施进行了探析。     

设计参数对一包TI蜗杆传动啮合性能的影响

从齿面接触分析的角度,分析了设计参数中心距、模数和蜗轮齿宽对一包TI蜗杆传动啮合性能的影响。结果表明：相对于理想啮合情况,在蜗轮分度圆直径一定的情况下,较大的中心距及较小的模数可以获得较理想的接触线的形状及分布;蜗轮齿宽的变化对接触线和啮合界限线的分布规律没有影响,但会影响接触线的长度。这些结论为合理选择设计参数提供了理论指导。     

高原环境对军用油料装备柴油动力性能影响分析

针对青藏高原特殊地理环境和气候条件特点,通过某大型群车加油车在高原地区的训练使用,分析海拔高度与大气压力、空气密度和温度的对应关系,探讨了在高原环境条件下使用油料装备其柴油动力的动力性、经济性及低温起动性能受到的影响,提出了相应的改进措施。     

军队院校科研工作绩效评估探讨

阐述了军队院校科研工作绩效评估的目的、作用和内容等,讨论了军队院校科研工作绩效评估的基本方法,对开展军队院校科研工作绩效评估的相关问题进行了探讨.     

综合飞行/火力控制系统性能评价

详细介绍了综合飞行 /火力控制系统 (IFFCS)性能评价的方法。该方法把评价过程分为单元评价、组合评价和系统性能评价 ,将系统性能指标逐层分解 ,以保证闭合系统最终能完成自动攻击任务。以高性能控制系统仿真软件MATTRIXX6 .0为平台 ,按此方法开发的评价软件获得了用户的认可     

论消防基层部队依法执勤理论创新与实践

依法执勤是指公安消防部队依照消防法律、法规等规定所实施的行政行为和公安消防勤务活动。以对湖南消防总队基层部队的依法执勤理论创新与实践进行的专题调研为基础,介绍了他们在此问题上的探索与实践及取得的成绩,分析探讨了开展依法执勤工作面临的问题,并提出开展依法执勤工作的建议。     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.