可移植人体外耳支架的3D打印关键技术

探索使用医用硅胶制作患者个体外耳支架的关键技术,使用计算机断层扫描和逆向建模技术得到对应患者个体的外耳数字模型,利用3D打印技术制造人体外耳支架模具,并使用医用硅胶MED 4735完成人体外耳支架的制作成型。动物实验验证了其生物相容性,证明了方法的可行性。通过该技术制作的硅胶人体外耳支架可以高度模仿患者特定的耳廓形状,支架精度高、制造周期短、无生物排异,可为替代肋软骨雕刻人体外耳支架进行耳廓缺损治疗提供依据。     

改性C/C复合材料快速制备与抗烧蚀性能考核

采用液相浸渍法结合反应熔渗法快速制备改性C/C复合材料,研究其微观组织及在氧乙炔焰和高频等离子体风洞环境中的烧蚀行为。结果表明:改性C/C复合材料主要含有Hf C,Zr C,Ta C等高熔点陶瓷改性相,其密度为3.83 g/cm3,开孔率仅为4.71%。氧乙炔焰烧蚀360 s后,改性C/C复合材料表面形成一层主要由Hf O2,Zr O2,Ta2O5组成的致密氧化物层,材料的线烧蚀率为0.005 18 mm/s。使用高频等离子体风洞考核改性C/C复合材料球头模型,在热流量3.5 MW/m2、驻点温度2293℃的条件下考核180 s后,模型表面生成致密光滑的氧化物保护层,与基体结合牢固,模型形状及尺寸无明显改变,去掉氧化物后测得其线烧蚀率为0.001 72 mm/s。     

Lot sizing with learning and forgetting in setups: Analytical results and insights

This article considers the dynamic lot sizing problem when there is learning and forgetting in setups. Learning in setups takes place with repetition when additional setups are made and forgetting takes place when there is a break between two successive setups. We allow the amount forgotten over a break to depend both on the length of the break and the amount of learning at the beginning of the break. The learning and forgetting functions we use are realistic. We present several analytical results and use these in developing computationally efficient algorithms for solving the problem. Some decision/forecast horizon results are also developed, and finally we present managerial insights based on our computational results. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 93–108, 2016     

基于改进协方差控制的传感器管理算法

针对传统的基于协方差控制的传感器管理算法使用全遍历方法所造成的计算量大,以及传感器切换频繁的问题,提出了一种基于改进协方差控制的传感器管理算法。该算法在每一时刻首先判断前一时刻所用传感器组是否能够满足目标跟踪需求,以滤波协方差与期望协方差的偏差作为参考,结合量纲变换和特征值求取,为协方差偏差矩阵经过量纲变换后得到的量纲一致阵的所有特征值设定一个精度阈值,然后判断滤波协方差是否满足期望,从而决定是否维持当前选择的传感器组。在目标作匀速、匀加速、协同转弯等多种场景下进行了算法性能测试分析,仿真结果表明,该算法不仅在大部分场景下满足目标跟踪精度,而且能够提高传感器管理算法的实时性,同时降低传感器的切换频率。     

New sources of military change – armed forces as normal organizations

The literature on how European states have adapted to the post-cold war security environment ffocuses invariably on different understandings of military transformation, a process which is seen as inherently different from other forms of organizational change. However, as this paper argues, new management practices, going back to the introduction of so-called New Public Management (NPM) reforms throughout Europe in the 1980s, have eventually penetrated also the last bastion of the old state – the defense sector. Taking a critical approach to the idea of military transformation and existing theories of military change, the paper demonstrates how other international developments have pushed towards what may be seen as a “normalization” of Europe’s defense sectors. This has important implications for how we approach and understand change in contemporary defense organizations.     

利用Unity3D引擎实现某飞行器攻防对抗仿真

为了实现某飞行器攻防对抗的可视化仿真,利用可视化模型数据库构建技术,构建了全尺寸、高沉浸感、多视角的可视化仿真环境。利用Unity3D引擎的脚本技术,实现了导弹尾焰、大气云层、爆炸冲击波、视点跟随等特效与功能。该平台使用C＃和Unity3D引擎进行开发,实现了攻防双方参数设置、计算数据和图表输出、仿真画面输出等功能,并能在多次仿真后,对不同的参数进行统计分析。该平台具有较好的扩展性,能够逼真再现飞行器的攻防对抗过程。结果表明,对于需要不断修正数学模型以逼近真实的攻防对抗过程,每次修正都能立即通过可视化平台查看、验证模型修改对攻防对抗过程带来的影响,对飞行器的设计、作战使用具有一定的参考价值。     

军队科研机构推进国防知识产权转化运用

军队科研机构作为国家科技创新体系的重要组成部分,承担了大量科技创新任务,产生了许多具有自主知识产权的高水平科技成果,推动军队科研机构国防知识产权转化运用,是贯彻军民融合发展战略的必要途径。分析了军队科研机构国防知识产权转化的现状及制约转化的现实障碍,并结合实际探讨了推进军队科研机构国防知识产权转化的建议举措。     

应用镁金属化学还原法制备多孔Si/Si-O-C负极材料机理研究

以二乙烯基苯和聚硅氧烷为原料经先驱体转化法制备Si-O-C材料,利用镁金属在惰性气氛保护下高温还原制备多孔的Si/Si-O-C负极材料。利用X射线衍射、能谱分析、元素分析和场发射扫描电镜分析多孔Si/Si-O-C负极材料的组成、结构、形貌,从而研究利用镁金属化学还原法制备多孔Si/Si-O-C负极材料的机理。结果表明,镁金属在还原过程中生成MgO和Mg_2SiO_4等产物,经HCl洗涤后可形成多孔的Si/Si-O-C负极材料。Si/Si-O-C材料中的单质硅分布于多孔的Si-O-C相中,一定程度上可缓解Si在循环过程中产生的体积效应。利用镁金属还原Si-O-C材料制备多孔Si/Si-O-C材料是一种可行的制备方法。     

Quantitative monitoring of military transformation in the period 1992–2010: Do the protagonists of transformation really change more than other countries?

Military transformation is a complex, slow, asymmetric, changeable, political, and not necessarily completely rational process that clearly needs an effective monitoring mechanism. This paper fills a gap in current literature by creating and testing a model for multi-dimensional and multi-level quantitative monitoring of military transformation applicable in any country. The model is based on 10 transformation indicators that reflect changes in organizational structure, personnel structure, weapon systems, and defense spending. Its application on a sample of seven countries (USA, United Kingdom, France, Netherlands, Poland, Russia, and China) in the period from 1992 to 2010 unexpectedly shows that the USA – a protagonist in the transformation process among allies as well as globally – has carried out the smallest relative change. The non-directed transformation index indicates that Russia carried out 51.8% more change (or 34.1 index units), and the directed index indicates that Poland carried out 157.2% (or 40.8 index units) more change than the USA.     

两道同侧扫掠激波作用下形成的三维平板边界层

为探索一种减弱扫掠激波/边界层干扰强度的侧压方式,采用数值计算方法研究两道同侧扫掠激波作用下形成的三维平板边界层。对三维边界层的流动机理进行研究,并与相同气流偏转角的一道扫掠激波作用下形成的三维边界层进行定量比较。研究表明,存在两道同侧扫掠激波时,第一道扫掠激波使侧壁附近边界层变薄,进而使第二道扫掠激波与再附形成的边界层的相互作用减弱,从而总的效果是两道扫掠激波与边界层的相互作用强度比一道扫掠激波的弱;两道扫掠激波的气流总偏转角与一道扫掠激波的相同,相交后汇聚成的激波强度与一道扫掠激波的基本相同,之前被两道扫掠激波"扫"起来的边界层在汇聚激波作用下还呈现锥形流动,分离线和来流的夹角也与一道扫掠激波的基本相同。