要地防空指挥控制系统作战效能灰色聚类评估

建立要地防空指挥控制系统作战效能评估指标体系,运用层次分析法确定各层次指标权重,提出了一种基于灰色定聚类和中心点三角白化权函数的要地防空指挥控制系统作战效能灰色聚类评估方法,并通过算例对该方法的有效性进行了检验。结果表明该方法是切实可行的。     

色噪声环境下MIMO雷达相干目标角度估计算法

针对色噪声环境下的MIMO雷达相干目标角度估计问题,提出一种基于目标信息矢量重构的角度估计算法.算法对MIMO雷达的接收数据进行了低复杂度改进,通过计算四阶累积量,得到一组矢量并证明该矢量包含所有目标的角度信息,通过重构Toeplitz矩阵,结合MUSIC算法实现了色噪声环境下MIMO雷达相干目标的角度估计.算法保留了MIMO雷达的阵元扩展能力和目标分辨力,具有自动抑制加性高斯白噪声和色噪声的能力,实现了相干目标的有效估计,更利于在实际中应用.最后计算机仿真结果证实了算法的有效性和可行性.     

结合流形滤波的矩阵信息几何检测器

针对小样本、非均匀杂波下的信号检测问题,提出一种基于流形滤波的矩阵信息几何检测器,将信号检测问题转化为矩阵流形上的几何问题。将每一个样本的相关性数据建模为一个托普利兹正定矩阵,在此基础上,利用每一个样本数据的邻近矩阵进行加权平滑滤波,去除一部分杂波能量,提升目标与杂波间的区分性。计算了辅助样本数据对应矩阵的几何均值,通过比较待检测样本数据矩阵与几何均值矩阵之间的距离与检测门限的大小,以实现信号检测。实验结果表明,与自适应匹配滤波相比,本文方法在小样本、非均匀杂波下具有明显的性能优势。     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

雷达信号仿真中箔条干扰回波模型研究

雷达信号仿真是抗干扰算法研究和验证的有效措施。针对箔条干扰随机信号模型难以满足高精度仿真的需要,本文在分析和总结箔条干扰散射特性和运动特性的基础上,对箔条干扰回波模型进行了更深入和精细化的研究。在Matlab平台上通过编程优化克服了复杂计算的问题,并获得了较好的模拟效果。仿真实验表明,该模型可为精确研究箔条干扰提供数据支持。     

装备保障综合演练风险分析

采用工作结构分解(Work Breakdown Structure,WBS)和风险结构分解法(Risk Breakdown Structure,RBS)对装备保障综合演练全过程的风险及其风险因素进行了系统分析,得出了装备保障综合演练过程中存在的7类风险、24种风险因素;运用网络层次分析法(Analytic Network Process,ANP)对各种风险及其风险因素进行了评估,得出了其对装备保障综合演练风险影响的权重及排序。研究结果可为装备保障综合演练顺利开展,确保人员、装备安全提供参考。     

Deconsolidation and combustion performance of thermally consolidated propellants deterred by multi-layers coating

Both heating and solvent-spray methods are used to consolidate the standard grains of double-base oblate sphere propellants plasticized with triethyleneglycol dinitrate (TEGDN) (TEGDN propellants) to high density propellants. The obtained consolidated propellants are deterred and coated with the slow burning multi-layer coating. The maximum compaction density of deterred and coated consolidated propellants can reach up to 1.39 g/cm³. Their mechanic, deconsolidation and combustion performances are tested by the materials test machine, interrupted burning set-up and closed vessel, respectively. The static compression strength of consolidated propellants deterred by multi-layer coating increases significantly to 18 MPa, indicating that they can be applied in most circumstances of charge service. And the samples are easy to deconsolidate in the interrupted burning test. Furthermore, the closed bomb burning curves of the samples indicate a two-stage combustion phenomenon under the condition of certain thickness of coated multi-layers. After the outer deterred multi-layer coating of consolidated samples is finished burning, the inner consolidated propellants continue to burn and breakup into aggregates and grains. The high burning progressivity can be carefully obtained by the smart control of deconsolidation process and duration of consolidated propellants. The preliminary results of consolidated propellants show that a rapid deconsolidation process at higher deconsolidation pressure is presented in the dynamic vivacity curves of closed bomb test. Higher density and higher macro progressivity of consolidated propellants can be obtained by the techniques in this paper.     

Analysis of parameter estimation using the sampling-type algorithm of discrete fractional Fourier transform

Parameter estimation is analyzed using two kinds of common sampling-type DFRFT (discrete fractional Fourier transform) algorithm. A model of parameter estimation is established. The factors which influence estimation accuracy are analyzed. And the simulation is made to verify the conclusions. From the theoretic analysis and simulation verification, it can be drawn that, for the estimation of chirp-rate and initial frequency, Pei's method [10] is more suitable if the absolute value of chirp-rate is small relatively; Ozaktas' method [9] is more suitable if the absolute value of chirp-rate is large relatively; and the two methods are both workable if the absolute value of chirp-rate is moderate. The scope of moderate chirp-rate can be approximately determined as [40 Hz/s, 110 Hz/s].     

一种新的雷达恒虚警(CFAR) 处理器

如何维持雷达检测系统恒定的虚警率是现代雷达技术和信号处理技术中重要的问题之一。为使雷达检测系统在复杂的杂波环境中获得恒定的虚警率,就需要有高性能的恒虚警(CFAR)处理器。本文提出的新型CFAR 处理器选择一个与被检测距离单元的值相接近的均值来作为CFAR 的门限,从而使这种处理器具有能够及时反映外部杂波环境变化的自适应性;它硬件实现简单,具有很好的抗多目标效应、抗杂波边缘效应、抗大目标“吃”小目标效应以及降低(CFAR)损失的性能。     

雷达虚拟维修训练中交互系统的通用性

基于USB接口技术对"通用雷达装备虚拟维修训练系统(URVMTS)"的人机交互系统进行研究,通过合理的软、硬件设计实现了系统的通用性。不同的实装操作部件经过适当的信号调理均可以通过该系统方便地实现与雷达虚拟样机之间的交互。着重介绍了交互系统的通用性设计与实现方法,包括系统的通用性设计方案,USB硬件电路的通用性设计及相应的软件开发。