Orbix的分布对象计算性能分析

通过一个计数器的分布对象设计及Orbix实现,阐明了先进的分布对象技术标准CORBA的核心概念以及符合CORBA2．0标准的中间件产品Orbix的分布对象设计和实现过程,通过计算比较并分析了Orbix在单机和网络分布环境下实现效率的差异,并提出了用单机模拟网络环境下分布对象实现效率的方法．     

Exact analysis of (R,s, S) inventory control systems with lost sales and zero lead time

We study an (R, s, S) inventory control policy with stochastic demand, lost sales, zero lead‐time and a target service level to be satisfied. The system is modeled as a discrete time Markov chain for which we present a novel approach to derive exact closed‐form solutions for the limiting distribution of the on‐hand inventory level at the end of a review period, given the reorder level (s) and order‐up‐to level (S). We then establish a relationship between the limiting distributions for adjacent values of the reorder point that is used in an efficient recursive algorithm to determine the optimal parameter values of the (R, s, S) replenishment policy. The algorithm is easy to implement and entails less effort than solving the steady‐state equations for the corresponding Markov model. Point‐of‐use hospital inventory systems share the essential characteristics of the inventory system we model, and a case study using real data from such a system shows that with our approach, optimal policies with significant savings in inventory management effort are easily obtained for a large family of items.     

金属泡沫断裂韧性的试验研究

金属泡沫在其实际应用中,断裂性能和断裂韧性对于承载的多孔金属泡沫有着重要的意义。基于美国试验材料学会相关标准,采用三点弯曲试样测定了铝泡沫的I型断裂韧性。研究表明,金属泡沫的断裂为脆性断裂,在裂纹尖端附近,孔壁最薄弱的区域最容易发生变形;随着进一步加载,一些孔壁发生断裂,微裂纹在断裂尖端附近出现。随着载荷的增加,主裂纹在缺口根部形成或由微裂纹合并而成,并开始在多孔结构内传播。裂纹沿着结构最薄弱处传播,并产生次生裂纹和裂纹桥。裂纹总的扩展方式还是I型断裂。根据试验P-V曲线特点,取最大载荷点对应的力与位移求解出铝泡沫的裂纹尖端临界张开位移的平均值为0.051 mm。     

多约束下的高超声速飞行器三维非线性自适应末制导律

面向多约束下高超声速飞行器末制导过程中的通道耦合、参数扰动、模型失配等突出问题,设计一种适于高超声速飞行器的三维非线性自适应末制导律。为了模型描述的完整性和简洁性,引入视线旋量和旋量速度的概念,并基于此建立三维制导参考模型和实际系统的表达式;为了保证制导律的鲁棒性和自适应性,基于自适应控制理论,设计一种三维非线性自适应制导律;通过数学推导证明了该制导律的稳定性。该制导律能够从理论上克服高超声速飞行器末制导面临的通道耦合、参数扰动、模型失配等突出问题,满足多约束制导要求。仿真结果验证了所设计制导律的有效性。     

含轴间距误差的消隙齿轮刚柔耦合动力学仿真

轴间距误差对消隙齿轮精度和性能有重要影响,但其机理和规律并不清楚。基于接触碰撞力约束关系建立齿轮接触动力学模型,进一步利用ADAMS/Flex建立单级消隙齿轮传动系统的刚柔耦合模型,通过刚柔耦合动力学仿真研究消隙齿轮传动在不同轴间距制造误差条件下的振动及频率特性。研究发现:随着轴间距的减小,扭簧的平均力矩增大,齿轮齿面间的啮合力矩以及摩擦力矩也将增大,从而阻碍扭矩的正常传递,并导致固定齿轮转速幅值降低;随着轴间距的增大,固定齿轮主谐振频率整体上降低,而且在轴间距稍大于标准中心距时降低很快。这一发现可指导消隙齿轮传动的设计和装配。     

Integrated guidance and control of guided projectile with multiple constraints based on fuzzy adaptive and dynamic surface

Based on fuzzy adaptive and dynamic surface (FADS), an integrated guidance and control (IGC) approach was proposed for large caliber naval gun guided projectile, which was robust to target maneuver, canard dynamic characteristics, and multiple constraints, such as impact angle, limited measurement of line of sight (LOS) angle rate and nonlinear saturation of canard deflection. Initially, a strict feedback cascade model of IGC in longitudinal plane was established, and extended state observer (ESO) was designed to estimate LOS angle rate and uncertain disturbances with unknown boundary inside and outside of system, including aerodynamic parameters perturbation, target maneuver and model errors. Secondly, aiming at zeroing LOS angle tracking error and LOS angle rate in finite time, a nonsingular terminal sliding mode (NTSM) was designed with adaptive exponential reaching law. Furthermore, combining with dynamic surface, which prevented the complex differential of virtual control laws, the fuzzy adaptive systems were designed to approximate observation errors of uncertain disturbances and to reduce chatter of control law. Finally, the adaptive Nussbaum gain function was introduced to compensate nonlinear saturation of canard deflection. The LOS angle tracking error and LOS angle rate were convergent in finite time and whole system states were uniform ultimately bounded, rigorously proven by Lyapunov stability theory. Hardware-in-the-loop simulation (HILS) and digital simulation experiments both showed FADS provided guided projectile with good guidance performance while striking targets with different maneuvering forms.     

VXI总线在导弹综合测试系统的应用

介绍了VXI总线系统的技术特点 ,阐述VXI总线技术在导弹综合测试系统的应用情况 ,详细描述了利用VXI总线组建的导弹测试系统的硬件及应用软件的设计 ,指出VXI总线技术在国防武器装备中具有广泛的应用前景。     

吸气式远程超声速防空导弹一体化外形设计的几个重大技术问题

根据国外吸气式超声速战术导弹一体化外形设计取得的最新进展 ,着重分析了这类导弹外形设计的特点和技术关键 ,提出了吸气式远程超声速防空导弹一体化外形设计中应解决好的几个重大技术问题 ,以期引起各方对吸气式防空导弹总体设计中有关问题的关注和讨论 ,共同寻找解决这些技术问题的有效途径     

基于快速独立分量分析的异步多用户检测方法

深入分析了非理想功率控制下异步CDMA多用户接收机的信号特点,推导出了多小区接收信号模型。提出了基于快速独立分量分析(Fast Independent Component Analysis,FastICA)的异步多用户检测方法,该方法具有抗远近效应,抗多址干扰的能力。仿真结果表明:该算法具有迭代次数少、计算量小、多用户分离效果好的优点,非常适合于非理想功率控制下的多用户检测,该方法大大提高了非理想功率控制下多用户接收机的性能。     

A bivariate optimal replacement policy for a cold standby repairable system with repair priority

In this article, an optimal replacement policy for a cold standby repairable system consisting of two dissimilar components with repair priority is studied. Assume that both Components 1 and 2, after repair, are not as good as new, and the main component (Component 1) has repair priority. Both the sequence of working times and that of the components'repair times are generated by geometric processes. We consider a bivariate replacement policy (T,N) in which the system is replaced when either cumulative working time of Component 1 reaches T, or the number of failures of Component 1 reaches N, whichever occurs first. The problem is to determine the optimal replacement policy (T,N)* such that the long run average loss per unit time (or simply the average loss rate) of the system is minimized. An explicit expression of this rate is derived, and then optimal policy (T,N)* can be numerically determined through a two‐dimensional‐search procedure. A numerical example is given to illustrate the model's applicability and procedure, and to illustrate some properties of the optimal solution. We also show that if replacements are made solely on the basis of the number of failures N, or solely on the basis of the cumulative working time T, the former class of policies performs better than the latter, albeit only under some mild conditions. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010