黏弹性基体中挠曲电Timoshenko纳米梁振动特性分析

以黏弹性基体中的Timoshenko纳米梁为研究对象,综合考虑非局部效应、压电效应和挠曲电效应的影响,基于哈密顿原理建立了系统的振动控制方程和相应的边界条件,给出了两端简支边界条件下挠曲电纳米梁控制方程的求解方法,系统地研究了非局部参数、挠曲电系数以及黏弹性基体对挠曲电纳米梁振动特性的影响规律。结果表明:横向挠曲电系数能显著增加挠曲电纳米梁的结构刚度,而非局部效应和切向挠曲电系数则会降低系统的结构刚度。此外,通过研究黏弹性基体的影响规律,可得到挠曲电纳米梁不再发生往复振动时对应的黏弹性基体临界阻尼系数。相关研究结果可为挠曲电纳米梁在俘能器中的推广应用提供理论基础。     

Effect of projectile parameters on opening behavior of PELE penetrating RC target

When a penetrator with enhanced lateral effect (PELE) impacts on a reinforced concrete (RC) target, the target is damaged with a large opening. An understanding of how PELE projectile parameters affect the opening dimension, is essential for effective design of the PELE projectile. In this study, under the condition that the impact velocity and target parameters (strength and thickness) were fixed values, the important influence factors of the PELE (jacket wall thickness B, jacket material strength Y1, filling material strength Y2 and angle of monolithic jacketθ) were determined by a dimensional analysis. Tests and simulations of the PELE penetrating the RC target were conducted to analyze the influence of these factors on opening diameter ((D), an equivalent diameter under relative kinetic energy). Based on the test and simulation results, it is found that the influence of these factors B, Y1 andθon the deformation mode of the jacket shows a similar trend:as values of the three factors decrease, the jacket deforms from small bending deformation to large one, and then to curling deformation. This causes the opening diameter to first increase with the decrease of these three factors, and then decreases. It is well known that the bending resistance of the jacket is related to these factors B, Y1 andθ. Therefore, a plastic limit bending moment (M0) of the jacket was quoted to characterize the influence of these factors on the bending deformation of the jacket and the opening diameter of the target. The influence factor Y2 causes (D) to first increase with the increase of Y2, and then decreases. A formula was developed to predict the opening diameter, whose influence parameters were considered in a dimensionless way. It has been shown that the dimensionless opening diameter (D)/d1 is dependent on two dimensionless parameters Q = (d31fc/M0) and G = (fc/Y2), where d1 and fc are the outer diameter of the projectile and the compressive strength of the target, respectively.     

水下声探测系统载体振动干扰分析及抑制方法

针对水下探测系统载体振动对目标回波信号的微多普勒特征谱产生干扰的问题,从干扰产生的基本原理出发,推导了干扰的近似乘性表达式。在获取振动干扰数据的条件下,提出了针对乘性干扰的干扰抑制算法,并针对推导干扰乘性表达式时的近似条件,分析了近似算法带来的误差。仿真结果表明,该方法可有效抑制水下探测系统平台振动对目标回波信号的微多普勒特征谱产生的干扰,并且在绝大多数情况下,由算法带来的误差可以忽略不计。     

外光电效应中光电流的计算

根据金属中电子系统可假设为具有质量为m的粒子组成的理想费密气体,其在热平衡时服从费密-狄喇克分布规律,导出单位强度单色光束照射金属时所感生的光电流.     

水橇在地效翼船上的应用前景及设计思想

参阅了大量国外有关水橇的理论和试验资料,明确了水橇在地效翼船上缓冲冲击的作用,系统地分析了水橇各种设计参数,定性地指出了水橇设计的最佳形状以及实用中应注意的问题.     

基于HMM的机动目标识别

利用弹载高重频脉冲多普勒体制雷达所能获得的目标运动特征(加速度、加速度的变化率),将目标的机动性能与隐Markov模型(HMM)有机地相结合,提出了一种基于隐Markov模型(HMM)的动目标跟踪识别方案,并分析了其在不同条件下的有限识别能力。     

一种基于机载SAR原始回波的多普勒参数估计方法

多普勒参数的估计精度直接影响机载合成孔径雷达系统(SAR)成像质量。根据平均后的方位谱来估计多普勒中心频率,通过计算子图像之间的位移值来估计多普勒调频斜率。为了消除在实际应用中各种干扰的影响,采用了对原始回波数据加窗的方法来提高对估计的准确性。该算法的估计结果可以用于补偿载机运动误差引入的相位误差,从而实现高分辨率成像。通过使用实验数据进行分析,验证了该方法的有效性。     

利用脉冲激光的片上系统芯片单粒子效应试验

为评估脉冲激光试验对研究SoC(片上系统芯片)单粒子效应的有效性,构建了一个65 nm SoC的脉冲激光试验系统,并进行了试验。提出并采用坐标定位法、有源区聚焦法、ΔZ补偿法等针对大规模倒装焊集成电路的试验方法。对SoC的片上存储器、寄存器文件、RapidIO、DICE触发器等部件进行了脉冲激光试验和分析。结果表明:片上存储器对脉冲激光最为敏感,部件的激光试验与相应的重离子试验现象吻合,利用脉冲激光试验可有效研究纳米工艺下大规模集成电路的单粒子效应。     

目标毁伤效果预测研究

目标毁伤效果预测是优化火力打击方案、合理配置作战资源的基本前提,是当前迫切需要解决的问题。在分析目标毁伤效果预测基本流程的基础上,重点阐述了弹目交汇、目标物理毁伤、目标功能毁伤和系统目标功能毁伤等几个关键问题的研究方法和现状,讨论了目标效果预测问题的发展趋势。