一种新的星载高分辨宽测绘带SAR运动目标

本文针对星载多通道高分辨宽测绘带合成孔径雷达系统,提出了一种地面运动目标检测和参数估计方法,该方法首先利用空时自适应处理进行杂波抑制,然后采用传统SAR成像处理得到模糊的运动目标图像,接着利用恒虚警检测技术检测出所有运动目标,包括真实目标和由于多普勒模糊引起的虚假目标,再根据模糊图像的空间位置关系从所有成像目标中检测出运动目标的真实成像位置,最后根据运动目标的斜距历程得到因运动目标速度引起的图像位置偏移,由此估计得到运动目标速度。该方法具有运算量小、检测精度高等优点,星载仿真数据验证了本文方法有效性。     

装药长径比对EFP成型作用效果影响分析

针对装药长径比对EFP成型的影响,基于一种球缺型药型罩EFP,利用ANSYS／LS-DYNA仿真软件对其成型过程进行建模仿真,研究EFP成型过程及其各项参数．在该基础上,改变装药高度得到不同的装药长径比数据,并对不同长径比EFP形成过程进行仿真,得到不同装药长径比EFP的速度、速度增长率及炸药能量利用率等数据,为选择最佳装药长径比提供依据．     

有限声速的纯方位算法

针对纯方位条件下对等速直航目标观测的算法问题,将目标运动要素及平均声速作为待估计参数,给出了计算非线性最小二乘法目标函数梯度与Hessian矩阵的解析公式,基于这些公式,可以构造估计目标运动要素的一些算法及编程实现。部分数值实验表明,信赖域算法、Levenberg-Marquardt算法与Matlab用于解非线性最小二乘问题的函数lsqnonlin的计算精度基本一致。     

What determines military allocations in Africa: Theoretical and empirical investigations

This paper investigates theoretically and empirically the determinants of military spending in Africa. It specifies a formal model and uses time‐series and cross‐sectional estimations to ascertain the reasons behind variations in military allocations across and within 40 African countries during 1960–1991. The differences in military expenditures appear to reflect a complex of economic, political, and strategic factors at both national and international levels. Strategic considerations are, however, found to be the most important factors in most African countries.     

导频设计的MIMO-OFDM改进信道估计算法

为提高系统的传输效率并改善信道估计的性能,提出了一种结合优化导频设计的分段带阻滤波算法.采用优化的导频设计,该算法在少量增加计算复杂度的基础上,能够进一步提高信道估计的性能,与实际中广泛应用的经典时域滤波算法相比,具有更高的估计精度.仿真结果证明该算法适用于不同的信道环境,尤其在低信噪比的条件下,该算法能够明显降低信道估计的MSE.     

基于删除平均的VI-CFAR检测器

针对MLVI-CFAR检测器在多个随机分布干扰目标背景下检测性能不好,以及OSVI-CFAR检测器在均匀环境和仅单滑窗存在干扰目标的环境下检测性能欠佳问题,提出了一种基于删除平均(CML)的VI-CFAR检测器(CMLVI-CFAR).仿真验证了CMLVI-CFAR检测器在均匀背景及多目标干扰环境下,都具有比MLVI和OSVI-CFAR检测器好的检测性能,并且其在杂波边缘背景下的虚警控制能力与前两者也基本一致,说明其在实际杂波环境中具有更强的鲁棒性和良好的应用潜力.     

Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests

Cylindrical specimens are commonly used in Split Hopkinson pressure bar (SHPB) tests to study the uniaxial dynamic properties of concrete-like materials.In recent years,true tri-axial SHPB equipment has also been developed or is under development to investigate the material dynamic properties under tri-axial impact loads.For such tests,cubic specimens are needed.It is well understood that static material strength obtained from cylinder and cube specimens are different.Conversion factors are obtained and adopted in some guidelines to convert the material strength obtained from the two types of specimens.Previous uniaxial impact tests have also demonstrated that the failure mode and the strain rate effect of cubic specimens are very different from that of cylindrical ones.However,the mechanical background of these findings is unclear.As an extension of the previous laboratory study,this study performs numerical SHPB tests of cubic and cylindrical concrete specimens subjected to uniaxial impact load with the validated numerical model.The stress states of cubic specimens in relation to its failure mode under different strain rates is analyzed and compared with cylindrical specimens.The detailed analyses of the numerical simulation results show that the lateral inertial confinement of the cylindrical specimen is higher than that of the cubic specimen under the same strain rates.For cubic specimen,the corners are more severely damaged because of the lower lateral confinement and the occurrence of the tensile radial stress which is not observed in cylindrical specimens.These results explain why the dynamic material strengths obtained from the two types of specimens are different and are strain rate dependent.Based on the simulation results,an empirical formula of conversion factor as a function of strain rate is proposed,which supplements the traditional conversion factor for quasi-static material strength.It can be used for transforming the dynamic compressive strength from cylinders to cubes obtained from impact tests at different strain rates.     

Adaptive sliding mode control of modular self-reconfigurable spacecraft with time-delay estimation

The reconstruction control of modular self-reconfigurable spacecraft (MSRS) is addressed using an adaptive sliding mode control (ASMC) scheme based on time-delay estimation (TDE) technology. In contrast to the ground, the base of the MSRS is floating when assembled in orbit, resulting in a strong dynamic coupling effect. A TED-based ASMC technique with exponential reaching law is designed to achieve high-precision coordinated control between the spacecraft base and the robotic arm. TDE technology is used by the controller to compensate for coupling terms and uncertainties, while ASMC can augment and improve TDE’s robustness. To suppress TDE errors and eliminate chattering, a new adaptive law is created to modify gain parameters online, ensuring quick dynamic response and high tracking accuracy. The Lyapunov approach shows that the tracking errors are uniformly ultimately bounded (UUB). Finally, the on-orbit assembly process of MSRS is simulated to validate the efficacy of the proposed control scheme. The simulation results show that the proposed control method can accurately complete the target module’s on-orbit assembly, with minimal perturbations to the spacecraft’s attitude. Meanwhile, it has a high level of robustness and can effectively eliminate chattering.     

早期可靠性数据的统计分析及其应用

在大型复杂产品研制过程中,通过原理样机的各类试验所获得的早期可靠性数据对产品早期可靠性的评估及可靠性设计具有重要意义。文中利用顺序约束模型研究了早期可靠性数据的处理方法,并将早期可靠性数据评估结果应用于可靠性增长计划的制定,从而有效减短了可靠性增长试验的时间。最后,给出了一个实际例子,以说明上述方法的应用。     

基于波束域MUSIC方法的高分辨方位估计

现代声纳系统普遍采用水听器基阵和一定的信号处理来提高对目标的检测和定位能力,而基阵的波束形成则在其中起着核心作用。文中研究了窄带波束域高分辨方位估计技术,分析了波束域MUSIC方位估计的构造过程和具体实现方法。仿真计算表明,基于波束域MUSIC的方位估计算法是一种分辨空间小角域内多个目标的有效方法。