长方体类光学元件形位误差高精度测量方法

如何实现长方体元件光学面形位误差的高精度测量以及怎样利用测量数据对这些误差进行修正加工是制造过程中的主要问题。提出一种基于波面干涉的长方体类光学元件形位误差测量方法,借助大口径干涉仪和高精度端齿盘搭建测量系统,实现了长方体类光学元件1μm/400mm精度的平行度和垂直度测量,获得了高精度的形位误差综合分布数据,并利用磁流变、小磨头数控抛光等现代光学加工手段实现了此类光学元件的高精度加工。     

A bayesian optimisation methodology for the inverse derivation of viscoplasticity model constants in high strain-rate simulations

We present an inverse methodology for deriving viscoplasticity constitutive model parameters for use in explicit finite element simulations of dynamic processes using functional experiments, i.e., those which provide value beyond that of constitutive model development. The developed methodology utilises Bayesian optimisation to minimise the error between experimental measurements and numerical simulations performed in LS-DYNA. We demonstrate the optimisation methodology using high hardness armour steels across three types of experiments that induce a wide range of loading conditions: ballistic penetration, rod-on-anvil, and near-field blast deformation. By utilising such a broad range of conditions for the optimisation, the resulting constitutive model parameters are generalised, i.e., applicable across the range of loading conditions encompassed the by those experiments (e.g., stress states, plastic strain magnitudes, strain rates, etc.). Model constants identified using this methodology are demonstrated to provide a generalisable model with superior predictive accuracy than those derived from conventional mechanical characterisation experiments or optimised from a single experimental condition.     

Data-driven prediction of plate velocities and plate deformation of explosive reactive armor

Explosive reactive armor (ERA) is currently being actively developed as a protective system for mobile devices against ballistic threats such as kinetic energy penetrators and shaped-charge jets. Considering mobility, the aim is to design a protection system with a minimal amount of required mass. The efficiency of an ERA is sensitive to the impact position and the timing of the detonation. Therefore, different designs have to be tested for several impact scenarios to identify the best design. Since analytical models are not predicting the behavior of the ERA accurately enough and experiments, as well as numerical simulations, are too time-consuming, a data-driven model to estimate the displacements and deformation of plates of an ERA system is proposed here. The ground truth for the artificial neural network (ANN) is numerical simulation results that are validated with experiments. The ANN approximates the plate positions for different materials, plate sizes, and detonation point positions with sufficient accuracy in real-time. In a future investigation, the results from the model can be used to estimate the interaction of the ERA with a given threat. Then, a measure for the effectiveness of an ERA can be calculated. Finally, an optimal ERA can be designed and analyzed for any possible impact scenario in negligible time.     

驱动线圈极性排列方式对多级同步感应线圈发射器加速性能的影响

为提高多级同步感应线圈发射器的加速性能,以5级同步感应线圈发射器为例,在定义驱动线圈极性相对排列方式的基础上,基于场-路耦合的时步有限元分析方法,研究了驱动线圈极性排列方式对其加速性能的影响,结果表明:驱动线圈同极性相对排列方式更有助于提高发射效率。通过分析内部磁场的分布规律,探讨了驱动线圈同极性相对排列方式改善加速性能的原因,最后通过比较电枢内的感应电流密度的方法验证了分析的正确性。     

倾斜微型桩桩身参数敏感性有限元分析

基于有限元强度折减法,结合工程实例,利用软件ANSYS对不同倾角微型桩加固边坡以及倾斜微型桩的设桩位置、锚固深度和桩排距等桩身参数对边坡稳定性的影响进行了数值模拟分析。结果表明:微型桩加固边坡较优的倾斜角度为60°;随着设桩位置离坡顶距离的增加,边坡的稳定系数先增大后减小,当设桩位置距坡顶的相对位置为0.58~0.66,边坡的稳定系数较高;当桩排距为9倍桩径,边坡的稳定系数较高。研究结果为倾斜微型桩的设计与工程应用提供了理论依据,具有一定的普遍意义。     

基于多 Agent 系统的分队对抗建模仿真

使用基于多Agent系统的建模方法对分队对抗进行了“自底向上”地建模;建立了战场的模型,并从属性、行为、规则三方面建立了智能兵力Agent模型;基于多Agent仿真平台——NetLogo,构建了仿真系统,通过对Agent“微观”行为的仿真,获得了群体的“宏观”行为,为战争复杂系统仿真研究提供了参考。     

高精度有限体积法与间断有限元法的比较

通过数值算例,比较了高精度有限体积法和间断有限元法在求解不同问题时的表现。研究发现:在精度相同的条件下,间断有限元法的计算误差要明显小于有限体积法;间断有限元法的重构过程与高精度有限体积法相比较为简单,但高阶情形下解多项式的自由度较多并且需要计算体积分,因此整个求解时间较长。降低时间积分时解多项式的自由度数目是实现高精度算法在实际问题中应用的重要手段。     

临近空间大型柔性充气囊体结构特性分析*(专题约稿)

以临近空间平流层飞艇柔性充气囊体为研究对象,根据充气结构设计理论对充气囊体结构的最小压差和应力进行计算,建立平流层飞艇充气囊体结构有限元模型,在模型验证的基础上,采用非线性有限元方法对平流层飞艇充气囊体结构特性进行仿真分析,得到了囊体结构在不同压差和吊舱载荷作用下应力和变形分布及变化规律,并分析了结构加强配置对囊体应力和变形的影响,为平流层飞艇结构设计提供技术支撑和参考依据。     

稀相气力输送CFD-DEM仿真中两种模型的比较

比较了两种不同的CFD-DEM数学模型(模型A和简化模型A)在稀相气力输送数值模拟中的性能。简化模型A忽略了空隙率对气相的影响,在节省仿真时间的同时也提高了计算的稳定性。使用两种模型分别对带有弯管的稀相气力输送系统进行了仿真,对比仿真结果表明:两种模型对颗粒绳分散速度和弯管出口处颗粒分布的预测几乎一致,对弯管入口处颗粒速度和弯管中接触信息的预测也仅存在较小差别。     

含内置式耐压液舱舱段耐压船体结构应力分析

为研究静压下内置式耐压液舱结构的力学规律,采用有限元方法对内置式耐压液舱及船体结构进行强度计算,分析了不同工况下耐压壳的变形和应力特征,比较了不同区域耐压壳的应力情况。结果表明:液舱内外相连通时的工况更危险,耐压壳应力水平也更高。同时,内置式耐压液舱的存在使液舱底部耐压壳的应力水平高于耐压壳其他区域。该研究结果可为内置式耐压液舱结构设计提供指导。