基于ANSYS的预应力CFRP布加固混凝土梁有限元分析

采用ANSYS有限元分析软件,对卸载或不卸载时预应力碳纤维(CFRP)布加固梁进行仿真分析,并在有限元分析中提出了施加预应力的方法(升温法),以及利用单元的生与死实现不卸载时加固的方法。通过实例对比分析表明,基于ANSYS的有限元分析结果与试验分析结果吻合较好,可在一定程度上有效替代试验分析方法,从而减少试验所需的时间和费用,对后续的CFRP布加固混凝土结构的研究工作具有一定的参考价值。     

电视制导系统抗干扰性能评估

提出了一种空地电视制导导弹图像传输系统抗干扰评估的总体框架,建立了电磁干扰条件下系统的抗干扰评估的空间模型。而后基于有限状态机理论,建立了电视制导导弹图像识别模态转换模型,详细讨论了典型干扰对电视图像数据链的影响。最后,应用计算机仿真技术,得到制导系统在不同信噪比条件下导弹的最大作用距离和图像干扰效果。     

基于FLAMES和HLA的导弹分队作战仿真系统

研究了基于FLAMES和HLA导弹分队作战仿真。首先介绍了系统架构及工作流程,然后剖析了基于FLAMES和HLA进行导弹分队作战中的仿真实体之间的信息交互机制,最后探讨了基于FLAMES和HLA的开发过程,验证了基于FLAMES和HLA开发的导弹分队作战仿真的实用性,为以后分队作战智能化仿真研究提供借鉴。     

轴向应力波作用下的圆柱壳弹塑性后屈曲

为揭示柱壳屈曲变形的发展机理及屈曲波与弹塑性应力波耦合传播间的关系,运用非线性显示动力学有限元分析方法对承受轴向高速冲击载荷作用下柱壳的弹塑性后屈曲过程进行了研究。分析结果表明:对于柱壳在轴向高速冲击下的弹塑性轴对称动力屈曲,主要屈曲变形发生在柱壳的两端,屈曲变形的产生及发展与应力波在壳中的传播过程密切相关;塑性应力波在整个屈曲过程中起了绝对支配的作用;屈曲波的产生及发展,都与塑性波的传播及反射有关;弹性应力波由于在整个屈曲过程中持续的时间极短,处于次要的地位。     

有限水深Kelvin源格林函数及其导数的快速计算

应用线性船舶水动力学理论,将有限水深Kelvin移动兴波源格林函数分解成3部分:简单Rankine源集合、局部扰动项和波函数项。对各部分在亚临界和超临界航速时的快速计算分别作了讨论,其中对计算费时的局部扰动项采用了复数中的最陡下降积分法,加快了计算速度,进而引出各部分偏导数的计算。最后,比较了格林函数的差分值与偏导数值,计算了薄船兴波阻力与表面兴波,讨论了不同面元网格划分的收敛性,证实了亚临界、超临界航速兴波分别以横波、散波为主。     

Optimization of buckling load for laminated composite plates using adaptive Kriging-improved PSO: A novel hybrid intelligent method

An effective hybrid optimization method is proposed by integrating an adaptive Kriging (A-Kriging) into an improved partial swarm optimization algorithm (IPSO) to give a so-called A-Kriging-IPSO for maxi-mizing the buckling load of laminated composite plates (LCPs) under uniaxial and biaxial compressions. In this method, a novel iterative adaptive Kriging model, which is structured using two training sample sets as active and adaptive points, is utilized to directly predict the buckling load of the LCPs and to improve the efficiency of the optimization process. The active points are selected from the initial data set while the adaptive points are generated using the radial random-based convex samples. The cell-based smoothed discrete shear gap method (CS-DSG3) is employed to analyze the buckling behavior of the LCPs to provide the response of adaptive and input data sets. The buckling load of the LCPs is maximized by utilizing the IPSO algorithm. To demonstrate the efficiency and accuracy of the proposed methodology, the LCPs with different layers (2, 3, 4, and 10 layers), boundary conditions, aspect ratios and load patterns (biaxial and uniaxial loads) are investigated. The results obtained by proposed method are in good agreement with the literature results, but with less computational burden. By applying adaptive radial Kriging model, the accurate optimal results-based predictions of the buckling load are obtained for the studied LCPs.     

Bionic stab-resistant body armor based on triangular pyramid structure

A stab-resistant substrate was designed and realized with a triangular pyramidal structure, inspired by the biological armor model in nature. The stab-resistance behavior and dynamic response mechanisms were studied through numerical simulation and experimental testing of a knife impacting a substrate, and an optimal structural design was obtained accordingly, with a tilted angle of 22.5° and optimal thickness of 1.2 mm. It was shown that the triangular pyramidal structure generated twice the internal energy of the knife than the flat substrate due to the dispersing effect of the structure. The force parallel to the inclination caused a significant scratch on the substrate surface, while the force perpendicular caused obvious substrate deformation. A new riveting method was used to form the total layer, which passed the GA 68—2008 standard. The stab-resistant clothing coupled with the reduced wearing burden could provide effective protection and avoid fatal injuries on security personnel working in dangerous environments. The method provided may enlighten the future design and manufacturing of stab-resistant clothing.     

Dynamic necking of a near α titanium alloy at high strain rates:Experiments and modelling

The tensile behaviour of near α Ti3Al2.5 V alloy, conceived for applications in aerospace and automotive engineering, is characterized from quasi-static to high strain rates. The material is found to present noticeable strain rate sensitivity. The dynamic true strain rate in the necking cross-section reaches values up to ten times higher than the nominal strain rate. It is also observed that beyond necking the dynamic true stress-strain curves present limited rate dependence. The experimental results at different strain rates are used to determine a suitable constitutive model for finite element simulations of the dynamic tensile tests. The model predicts the experimentally macroscopic force-time response, true stress-strain response and effective strain rate evolution with good agreement.     

迎风格式在接触间断的数值耗散及其诱导误差

在不同流场参数条件下对三种迎风格式在接触间断中的数值耗散问题进行了数值实验,并对数值耗散产生的机理进行了分析。数值计算结果和理论分析表明,矢通量分裂格式计算接触间断问题时,若流场静止或流场内存在亚声速区域,密度耗散的产生会诱导出以特征速度运动的数值扰动误差,该误差对数值耗散的大小无影响,但会影响流场的速度及压力参数分布,从而改变流场的结构。在二维问题中,诱导误差相互干扰会产生大量的复杂小尺度结构,给流场结构分析带来困难。同时,在密度参数线性分布的流场中,若空间离散格式重构的对象为对流通量,使用矢通量分裂格式计算流场会产生数值误差,使计算精度难以到达二阶。     

改进非凸估计与非对称时空正则化的红外小目标检测方法

针对复杂背景下的红外小目标检测,在非对称时空正则化约束的非凸张量低秩估计算法基础上,提出了一种新的核范数估计方法代替原算法中的估计方法。提出基于结构张量与多结构元顶帽(Top-Hat)滤波的自适应权重张量对目标张量进行约束,增强目标张量稀疏性的同时抑制其中残存的强边缘结构。实验结果表明,所提改进算法能够更好地消除图像中强边缘结构对检测结果的影响,在保证检测率的情况下,较原算法具有更低的虚警率。