Numerical simulation of warhead transportation

The new numerical approach for analysis of the warhead transportations is suggested.This approach allows to control the warhead operability before its experimental analysis.The approach is implemented by the adequate models for the software ANSYS.Analysis of the loads at land operations and trans-portations of the warhead by natural roads,water and aviation allows to obtain the maximal values of loads,which are used in numerical simulations of the warhead.These loads give an opportunity to analyze the operability and the fatigue strength of the cartridge warhead.The numerical simulations of the attachments of the warhead combat elements are performed on the basis of the suggested method.The data of the numerical simulations verifies the operability of the fastener system of the warhead combat elements.     

An efficient SPH methodology for modelling mechanical characteristics of particulate composites

Particulate composites are one of the widely used materials in producing numerous state-of-the-art components in biomedical, automobile, aerospace including defence technology. Variety of modelling techniques have been adopted in the past to model mechanical behaviour of particulate composites. Due to their favourable properties, particle-based methods provide a convenient platform to model failure or fracture of these composites. Smooth particle hydrodynamics (SPH) is one of such methods which demonstrate excellent potential for modelling failure or fracture of particulate composites in a Lagrangian setting. One of the major challenges in using SPH method for modelling composite materials depends on accurate and efficient way to treat interface and boundary conditions. In this paper, a master-slave method based multi-freedom constraints is proposed to impose essential boundary conditions and interfacial displacement constraints in modelling mechanical behaviour of composite materials using SPH method. The proposed methodology enforces the above constraints more accurately and requires only smaller condition number for system stiffness matrix than the procedures based on typical penalty function approach. A minimum cut-off value-based error criteria is employed to improve the compu-tational efficiency of the proposed methodology. In addition, the proposed method is further enhanced by adopting a modified numerical interpolation scheme along the boundary to increase the accuracy and computational efficiency. The numerical examples demonstrate that the proposed master-slave approach yields better accuracy in enforcing displacement constraints and requires approximately the same computational time as that of penalty method.     

基于神经网络的广义两点边值问题

在航天领域中 ,多数制导问题均可以抽象为广义两点边值问题。本文探讨了神经网络在广义两点边值问题求解中的应用。首先讨论了离线制导这一类静态两点边值问题的求解 ,在此基础上 ,对在线制导这一类动态两点边值问题进行了分析 ,并给出了有效的解决方法     

平板湍流边界层内气泡流流动实验研究

在低湍流度水槽里 ,利用片光源显示了平板气液两相湍流边界层内气泡流的流场结构 ,研究了平板安装位置、来流速度、喷气方式等参数对湍流边界层内气泡流的影响 .利用激光测速技术测量了平板水平放置时气泡流最外缘处的水平速度及厚度 .结果表明 :平板喷气减阻的原因在于喷气改变了平板湍流边界层的流动结构 ,抑制了湍流     

基于油液分析的自行火炮装备性能监测研究

提出了一种基于油液光谱分析技术的自行火炮装备磨损故障诊断方法 ,该方法主要包括用于监测润滑油中磨损金属颗粒浓度变化的模型 ,并制定了各主要磨损金属元素的浓度和梯度界限值 ,并将其分为三个层次。同时将灰色建模理论引入光谱分析领域 ,通过拟合光谱仪分析的数据 ,掌握润滑油中磨损金属颗粒浓度的变化规律 ,进而对其浓度变化规律进行预测 ,从而达到对装备进行性能监测的目的。     

热边界层流动中管道的热损失

在高粘液体管道输送中,利用热边界层减阻需确定热流量的计算。热边界层流动中管道的各种热损失是总热流量的一部分。热损失有管内、管外及保温层三种形式。管外热损失是向周围的空气散发的,通过对流的形式发生。管内的热损失是导热或对流。保温层的热损失主要是导热。利用热边界层理论的成果,给出了各种传热系数和管道热损失的计算公式,并给出了多个计算实例。     

应用边界交叉法的高超声速滑翔飞行器多目标轨迹优化

针对高超声速滑翔飞行器复杂约束条件下多目标轨迹设计问题,基于边界交叉法和伪谱法提出多目标轨迹优化方法。分析高超声速滑翔飞行器复杂约束轨迹优化问题的特点,提出多目标轨迹优化问题。采用边界交叉法和伪谱法将多目标轨迹优化问题转化为一组单目标优化子问题,利用非线性规划算法分别求解。在优化过程中,将已求解子问题的解作为下一个子问题的初始值,求解最大横程和最小峰值热流轨迹优化问题。仿真结果表明:所提方法能够有效搜索到优化轨迹的Pareto前沿,可以为高超声速滑翔飞行器轨迹设计提供参考。     

两道同侧扫掠激波作用下形成的三维平板边界层

为探索一种减弱扫掠激波/边界层干扰强度的侧压方式,采用数值计算方法研究两道同侧扫掠激波作用下形成的三维平板边界层。对三维边界层的流动机理进行研究,并与相同气流偏转角的一道扫掠激波作用下形成的三维边界层进行定量比较。研究表明,存在两道同侧扫掠激波时,第一道扫掠激波使侧壁附近边界层变薄,进而使第二道扫掠激波与再附形成的边界层的相互作用减弱,从而总的效果是两道扫掠激波与边界层的相互作用强度比一道扫掠激波的弱;两道扫掠激波的气流总偏转角与一道扫掠激波的相同,相交后汇聚成的激波强度与一道扫掠激波的基本相同,之前被两道扫掠激波"扫"起来的边界层在汇聚激波作用下还呈现锥形流动,分离线和来流的夹角也与一道扫掠激波的基本相同。     

多载荷识别频响函数矩阵求逆法的改进算法

分析了频响函数矩阵求逆法在多载荷识别中存在的问题 ,提出了两种改进算法 ,即算术平均法和条件数加权平均法。实验结果表明 ,这两种方法在识别精度和消除病态影响方面均优于传统的频域识别方法。     

三维边界积分方程中的奇异积分的处理

针对三维边界积分方程中奇异积分的不同形式分别进行了讨论,用刚体位移原理消除强奇异因子,用线性位移函数消除弱奇异因子,在计算工作量大大减少的情况下,保证了原求解精度的要求,并通过数值算例表明了该方法的可行性。