临近空间大型柔性充气囊体结构特性分析*(专题约稿)

以临近空间平流层飞艇柔性充气囊体为研究对象,根据充气结构设计理论对充气囊体结构的最小压差和应力进行计算,建立平流层飞艇充气囊体结构有限元模型,在模型验证的基础上,采用非线性有限元方法对平流层飞艇充气囊体结构特性进行仿真分析,得到了囊体结构在不同压差和吊舱载荷作用下应力和变形分布及变化规律,并分析了结构加强配置对囊体应力和变形的影响,为平流层飞艇结构设计提供技术支撑和参考依据。     

乱序超标量处理器核的性能分析与优化

随着处理器微体系结构日益复杂,性能分析在处理器研制过程中的作用越来越重要。常用的性能分析方法是建立性能模型,该方法主要用于研制初期的设计空间探索,如果用于微体系结构级的分析和优化,速度和精度都会成为限制因素。因此,提出一种基于计数器的性能分析方法,该方法以项目组已经完成的一款处理器核的硬件实现代码为基础,在处理器核外部添加一个专用性能监测单元,收集微体系结构分析和优化需要的各种事件,并通过结果分析器对统计的事件进行分析,得到微体系结构实现的性能受限因素。采用此方法,在现场可编程门阵列原型系统上对SPEC CPU2000测试程序运行时的性能受限因素进行分析,并根据分析结果采取相应的优化措施,优化后的处理器核性能得到了明显提升。     

Influence of propagation direction on operation performance of rotating detonation combustor with turbine guide vane

Due to the pressure gain combustion characteristics, the rotating detonation combustor (RDC) can enhance thermodynamic cycle efficiency. Therefore, the performance of gas-turbine engine can be further improved with this combustion technology. In the present study, the RDC operation performance with a turbine guide vane (TGV) is experimentally investigated. Hydrogen and air are used as propellants while hydrogen and air mass flow rate are about 16.1 g/s and 500 g/s and the equivalence ratio is about 1.0. A pre-detonator is used to ignite the mixture. High-frequency dynamic pressure transducers and silicon pressure sensors are employed to measure pressure oscillations and static pressure in the combustion chamber. The experimental results show that the steady propagation of rotating detonation wave (RDW) is observed in the combustion chamber and the mean propagation velocity is above 1650 m/s, reaching over 84% of theoretical Chapman-Jouguet detonation velocity. Clockwise and counterclockwise propagation directions of RDW are obtained. For clockwise propagation direction, the static pressure is about 15% higher in the combustor compared with counterclockwise propagation direction, but the RDW dominant frequency is lower. When the oblique shock wave propagates across the TGV, the pressure oscillations reduces significantly. In addition, as the detonation products flow through the TGV, the static pressure drops up to 32% and 43% for clockwise and counterclockwise propagation process respectively.     

大攻角飞行导弹控制器μ综合设计

导弹在大攻角飞行条件,由于非线性气动力和参数不确定等原因,其通道间存在强烈的耦合,经典的三通道控制器独立设计方法很难获得满意的系统性能.在设计大攻角飞行控制系统时,采用μ综合设计方法,通过仿真结果表明采用μ综合设计理论设计的控制器具有很好的鲁棒性能.     

C~3I系统通信子系统检测

就Ｃ￣３Ｉ系统通信子系统的检测提出了检测模型及系统几个重要性能指标的检测与分析方法,并对某通信子系统的检测结果进行了讨论。     

基于Petri网的C2S性能分析方法研究

给出了用时间连续随机Petri网和时间离散随机Petri网计算系统稳态概率的方法,并将其应用于指挥控制系统(C2S)的性能分析中,分析结果表明这种计算方法是可行的。     

舰船汽力装置变工况性能的图形化处理

应用现代计算机图形处理方法动态地描述舰用蒸汽动力装置及其设备的变工况性能数据,包括用图形交互的方式输入、显示和保存数据等关键内容．该方法已用于实际工程分析．     

Analysis of a production system in a general configuration

We consider a production system comprising multiple stations (or workshops) such as an entry station, a set of work stations, a central station, and an exit station, which are arranged in a general configuration. A worker (or a vehicle tool) is assigned to each station, who sends a part from the station to the destination station according to the required process path of the part. Any part is allowed to visit a work station more than once if its process path requires. We propose a new control strategy with the push policy for instructing each worker to send a part and the kanban mechanism for controlling the work‐in‐process (WIP) in each work station. As all work stations have limited local buffers, the central station is used for storing blocked parts temporarily. Such a production system is modeled as an open queueing network in a general configuration with a Markovian part sending policy and a machine no blocking mechanism. The queueing network is analytically characterized. Some important performance measures are compared with other control strategies. A semi‐open decomposition approach is applied to the queueing network for computing the blocking probabilities when parts arrive at the work stations. An algorithm is developed based on the semi‐open decomposition approach. Numerical experiments show the quality of the solutions obtained by the algorithm as well as a property of a performance measure. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 128–143, 2001     

维护条件下产品寿命分布规律分析

为了掌握维护条件下产品寿命分布规律,进一步解释其失效特性,从维护条件下产品性能状态变化角度出发,结合累积失效理论,利用复合Poisson过程建立了可靠性模型,得到了该条件下产品在线寿命分布模型。在此基础上,建立了维护条件下产品总体寿命分布模型,并利用偏度-峰度系数和贴近度分析,对维护条件下产品在线寿命分布和总体寿命分布规律进行了数值计算,解释了工程产品在线往往具有集中失效,而总体又具有随机失效的特性。以水泵转子为研究对象,通过数值分析,较好地描述了其定期维护条件下的可靠度和寿命分布,进一步验证了模型的可行性。     

分布式网络环境下雷达网的网络性能分析

在分布式网络环境下,对雷达网的性能评估是雷达网对抗论证和战术研究的重要组成部分。从复杂网络理论的角度研究了此系统的组成、特性,提出了它的网络结构及性能层次模型,以全新的角度去解决系统的评估问题。对网络结构模型的信息传输能力进行了仿真试验。仿真结果表明,网络模型能够正确指导系统的结构组建及性能评估。根据网络性能层次模型,应用最优指标法,实现了该系统网络综合性能的量化评估。