排序方式: 共有119条查询结果,搜索用时 15 毫秒
81.
《防务技术》2022,18(9):1622-1642
Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement. 相似文献
82.
利用前馈式人工神经网络方法,根据试验数据,建立了某火炮身管剩余寿命(RL)模型;并用该模型研究了各特征截面内径改变量对弹丸初速改变量的影响,以及弹丸初速改变量与总内径改变量间的关系。 相似文献
83.
为火箭子母弹定时开舱提供了一种性能先进的电子时间引信电路系统,阐述其电路组成、工作原理和功能,并分析了该电子时间引信系统的特点。 相似文献
84.
85.
旋转弹体高速入水水中弹道的模拟方法 总被引:4,自引:1,他引:3
针对旋转弹体高速入水特点,从弹体运动的动力学方程和相似理论出发,提出了模拟旋转弹体高速入水水中弹道的马赫相似实验方案.该方案在大气环境条件下,能够实现原型和模型两系统的主要相似准数相等. 相似文献
86.
闭环校射中雷达跟踪弹迹的滤波和预测方法 总被引:2,自引:2,他引:0
闭环校射武器系统中,要求实时测量弹丸和目标之间的偏差,因此火控雷达要同时完成对弹丸运动和目标运动的跟踪任务,实现对弹丸目标的精确跟踪对火控雷达来说是一个新任务.建立了一种针对此类问题的滤波和预测方法,这种方法充分利用关于弹丸运动规律的已有知识,突破了常规动目标跟踪方法的限制,使滤波和预测误差比常规方法减小数倍,成功地解决了闭环校射武器系统中的一个技术难点. 相似文献
87.
某底排火箭复合增程弹为分体式结构,战斗部与发动机壳体通过螺纹联接,一次试验中弹丸在火炮约束期和半约束期内发生解体现象,弹体在与发动机壳体螺纹连接的根部发生断裂,通过对参试弹丸的相关参数和弹道跟踪雷达测得速度-时间曲线研究,以1943年空气阻力定律和炮兵用标准气象条件为研究方法,对解体前、后级弹丸的弹道参数和飞行阻力特性进行分析计算,还原了解体弹丸的实际弹道参数和飞行阻力特性,通过对分析结果与试验结果进行对比,分析结果与试验测得结果吻合较好,文中提到的研究方法可为弹丸弹道解体或零部件脱落的故障归零提供理论依据,在工程实际应用中有一定的参考价值。 相似文献
88.
高速旋转弹位置与姿态测量数据分析方法 总被引:1,自引:0,他引:1
精确的弹箭位置与姿态测量数据是提高制导弹箭射击精度的基础。通过分析高速旋转弹位置与姿态传感器的量测噪声,采用卡尔曼滤波方法进行误差估计,以提高测量精度。基于高速旋转弹质心运动和角运动方程,建立了系统状态方程;根据全球定位系统和地磁传感器的测量原理,建立了量测方程;以某弹飞行数据为例,采用扩展卡尔曼滤波(EKF)和无味卡尔曼滤波(UKF)分别对弹箭的位置和姿态进行最优估计。仿真结果表明,采用上述方法可有效减少系统误差,并使综合误差进一步降低,射程与高度误差均控制在±1 m,攻角和侧滑角误差分别为±0.02 rad和±0.01 rad,可满足工程应用的要求。 相似文献
89.
针对大口径火炮使用增程修正弹打远修近问题,建立了增程修正弹单炮多发同时弹着的控制算法,仿真验证了算法可在不同射程上实现单炮多发同时弹着,对发挥舰炮作战效能具有一定的意义。 相似文献
90.
速射转管炮作为近程反导武器系统的重要一员,射击精度影响着其最终防御效果,通过对速射转管炮特点及其射击偏差机理的分析,研究了转管炮射击过程中身管转速、弹丸初速等多种因素对射击精度的影响,并在转管炮初始设计、弹道模型和校射等方面提出了修正误差、提高射击精度的方法。 相似文献