大延时网络中的主动队列管理机制

研究了网络延时对路由器主动队列管理机制的影响,分析了几种典型主动队列管理算法在大延时网络中的性能。在介绍了基于内模补偿的DC-AQM算法的优缺点之后,根据PID控制器延时补偿的Ziegler-Nichols设定方法,提出了ZNDC(Ziegler-Nichols delay compensation)AQM算法并进行了仿真实验验证,实验结果表明算法达到了预期的目标。     

气囊辅助RTM制备复合材料承力筒内腔尺寸控制技术

根据气囊充压压力与复合材料承力筒内径之间的变化关系,给出了成型复合材料承力筒内表面的气囊尺寸计算方程。分析了气囊充压压力增大对承力筒的壁厚、纤维含量和弯曲性能的影响。采用气囊辅助RTM工艺整体制备出复合材料承力筒。试验结果表明,气囊充压压力使复合材料承力筒的壁厚减薄,纤维体积含量增加,弯曲性能提高;选择适当的气囊充压压力可以制备出满足设计要求的复合材料承力筒。     

参数化滤波器逼近问题的全局最优算法

基于Lipschitz下界估值和分枝定界技术,给出了一维参数化小波滤波器逼近问题的全局最优算法。由于充分利用了滤波器逼近问题的特点,本方法将原来的Lipschitz算法的线性收敛速率提高为二次收敛速率。     

脉冲功率电源故障诊断方法研究

脉冲功率电源是电磁发射系统中最容易发生故障的薄弱环节,脉冲功率电源故障会使整个系统性能下降。针对脉冲功率电源故障,提出基于多层小波分析提取故障信息的模式搜索支持向量机故障诊断方法。通过建立脉冲功率电源的软故障模型,进行仿真分析获得电流故障数据样本,对故障样本进行离散小波分解,获得指定层细节信息的小波系数作为故障特征量;对故障特征量进行主成分分析,将小波系数进行降维,以便有效地进行故障诊断。通过实验,将所提方法故障诊断结果与其他三种故障诊断结果进行比较,验证了所提方法的有效性。     

航天装备备件配置现状SWOT分析及对策研究

全面分析航天装备备件配置现状,把握备件配置优化的主要方向,形成推动备件配置水平快速提升的关键策略,是提高航天装备备件保障科学性和高效性的重要基础。本文通过SWOT分析法对航天装备备件配置现状的优势、劣势、机遇和威胁进行了系统剖析,并在此基础上构建SWOT分析矩阵,进而基于矩阵因素的不同组合形式,研究形成改进航天装备备件配置现状、提高备件配置科学性的四种关键策略,即抓住机遇、发挥优势的S-O策略,利用机遇、克服不足的W-O策略,利用优势、应对威胁的S-T策略和弥补不足、应对威胁的W-T策略,提出当前应重点解决备件需求提报精度、库存配置科学性和协调激励机制三个现实问题,为开展航天装备备件配置问题深入研究明确了重点、确定了方向。     

Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.     

Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

智能化作战指挥模式需求

智能装备已经走入军队、走向战场,创建智能化作战指挥模式是智能化时代作战指挥的必然发展趋势,智能化作战指挥模式需求分析可为智能作战问题研究提供有效的信息。智能化作战指挥模式的需求分析已经具备了一定的物质、理论和技术基础,同时,也具有了一定的构建思路、实践条件和实验平台。在此基础上,本文从军事需求、功能需求和技术需求以及构建要求四个不同角度进行需求分析,以找准创建需求,为后续工作进一步展开奠定基础。     

Analysis of some critical aspects in hot machining of Ti-5553 superalloy: Experimental and FE analysis

In this study, a newly developed titanium superalloy, i.e., the Ti-5553 alloy has used for hot machining. This material replaced Ti-grade-5 alloy in the application of aerospace, automobile, and biomedical sector. However, similar to Ti-grade-5 alloy, the Ti-5553 alloy has a low thermal conductivity which makes it difficult-to-cut material categories hence, high tool wear, cutting force and bad surface finish. Hot machining of Ti-5553 has been studied at different machining condition (room and hot) using Deform-2D finite element analysis. The result from the simulation test was compared with the experimental value and reduction of cutting and thrust forces was observed. The experiment was carried out with the same input parameters as simulation, and good coherence between them observed. Additionally, cutting zone temperature, effective stress, etc. for both room and elevated the temperature are also discussed.