基于静力与稳定性分析的小卫星主接头选型优化

基于对预埋主接头蜂窝板的静力与稳定性分析,对小卫星主接头进行选型优化。采用三明治夹心板理论建立预埋分叉式和面板式小卫星主结构连接接头的蜂窝板试件有限元模型,分析得到了蜂窝板最大应力值与失稳载荷,通过与试验结果的对比分析确定了蜂窝板试件破坏原因。在此基础上讨论结构参数对蜂窝板承载性能的影响,确定出最优的接头设计形式。     

基于移动Agent的特定数值求解算法研究

在分布式环境下,运用移动Agent技术实现大型复杂系统研究中经常使用的特定数值算法求解,可显著提高计算效率。以分支定界法为例,介绍了其设计思想和实践步骤,并对算法的时间复杂度进行了分析。     

数值模拟气液针栓式火箭发动机喷雾燃烧对声学激励的响应

为研究气液针栓式火箭发动机的声学振荡特性并为其优化设计提供指导,加工了具有矩形燃烧室的LOX/GCH₄针栓式发动机,采用Euler-Lagrange方法仿真横向速度扰动产生的声学响应,以期在热试前了解声学激励频率对非稳态喷雾燃烧过程的影响。仿真结果表明,采用的横向速度扰动能在燃烧室内产生同频率的一阶横向声学振荡响应。喷雾燃烧对声学激励的响应强弱受扰动频率与燃烧室一阶横向振荡模态固有频率的相对大小影响较大。当扰动频率与该固有频率相等时,压力和燃烧释热随速度扰动出现同相振荡,压力振荡幅值显著增高导致燃烧室前半段的喷雾和火焰同步摆动;同时,燃烧室内存在扩散燃烧变为预混燃烧的趋势,甲烷在更短的距离内燃烧完全且燃烧室温度趋于均匀。     

复合固体推进剂颗粒填充模型及其统计特性分析

复合固体推进剂属于高填充比颗粒类复合材料,氧化剂和金属颗粒在基体中的随机分布使其在细观尺度具有非均质的特点。从细观尺度研究固体推进剂燃烧及力学性能时,必须考虑颗粒级配、空间分布和种类等因素的影响。采用分子动力学方法,以硝酸酯增塑聚醚高能复合固体推进剂为研究对象,将固体颗粒模型化为球形,生成其在基体内随机分布的颗粒填充模型。利用Monte-Carlo算法模拟计算颗粒填充模型细观结构的两点概率函数,并研究了颗粒填充体积分数、尺寸与级配等参数对其的影响规律。从统计意义上给出具有各态历经性、统计均匀性和各向同性特点的颗粒填充构型最小周期性代表体元尺寸,可有效减小后续研究的计算量,节约计算成本。所构建的推进剂细观几何构型及对最小周期性代表体元尺寸的计算为后续开展复合固体推进剂细观尺度燃烧、燃面处铝团聚及力学性能数值研究奠定了基础。     

Fabrication and analysis of TIG welding-brazing butt joints of in-situ TiB2/7050 composite and TA2

Lightweight hybrid structures of Al MMCs and titanium alloy dissimilar materials have great prospect in the defence industry application. So, it is necessary to join Al MMCs with Ti metal to achieve this structural design. In this work, in-situ TiB2/7050 composite and TA2 were firstly attempted to join by TIG welding-brazing technique. The result was that the intact welding-brazing butt joint was successfully fabricated. The joint presents dual characteristics, being a brazing on TA2 side and a welding on TiB2/7050 side. At brazing joint side, ER4043 filler metal effectively wets on TA2 under TIG heating condition, and a continuous interfacial reaction layer with 1—3μm is formed at welded metal/TA2 interface. The whole interfacial reaction layers are composed of Ti(AlSi)3 intermetallic compounds (IMCs), but their morphologies at the different regions present obvious distinguishes. The microhardness of the reaction layers is as much as 141—190 HV. At welding joints side, the fusion zone appears the equixaed crystal structure, and the grain sizes are much smaller than those of welded metal, which is attributed to the effect of TiB2 particulates from the melted TiB2/7050 on acceleration formation and inhibiting growth for the new crystal nucleus. The tensile test results show that average tensile strength of the optimal welding-brazing joint is able to achieve 138 MPa. The failure of the tensile joint occurs by quasi-cleavage pattern, and the cracks initiate from the IMCs layer at the groove surface of TA2 and propagate into the welded metal.     

A new energy efficient management approach for wireless sensor networks in target tracking

This paper mainly studied the problem of energy conserving in wireless sensor networks for target tracking in defensing combats. Firstly, the structures of wireless sensor nodes and networks were illustrated; Secondly, the analysis of existing energy consuming in the sensing layer and its calculation method were provided to build the energy conserving objective function; What's more, the other two indicators in target tracking, including target detection probability and tracking accuracy, were combined to be regarded as the constraints of the energy conserving objective function. Fourthly, the three energy conserving approaches, containing optimizing the management scheme, prolonging the time interval between two adjacent observations, and transmitting the observations selectively, were introduced; In addition, the improved lion algorithm combined with the Logistic chaos sequence was proposed to obtain sensor management schemes. Finally, simulations had been made to prove the effectiveness of the proposed methods and algorithm.     

DS/FH中窄带干扰的变换域处理方法研究

分别给出了DS/FH混合扩频系统中窄带干扰的两种变换域处理方法。具体分析了基于频域FFT和时频域M_PWD分析的被干扰谱线检测与抑制算法 ,为避免谱泄漏 ,在变换处理之前加窗处理。给出了不同处理算法情况下系统误码率的数字仿真结果     

改善机载前向阵雷达全程检测性能的研究

针对前向阵的杂波分布特性 ,给出了一种空时自适应处理 (STAP)结合多重中脉冲重复频率(MPRF)的处理方案 ,研究了重复频率的选择以改进系统性能 ,并分析计算了三路多普勒通道联合处理STAP方法在一组中脉冲重复频率下的改善因子和距离 /速度二维盲区分布图。理论分析与仿真结果表明 ,该方案可以大大改善机载前向阵雷达的全程检测性能     

多维离散变换与小波的并行算法及其实现

讨论了多维 DCT和多维 DWT的并行行列算法和并行多项式变换算法 ,并用 Log P模型对算法进行了分析。在仔细分析一维和二维离散小波变换与小波包变换计算结构的基础上 ,提出了它们的并行算法。算法只需相对较少的通信时间 ;适合大规模并行机 ( MPP)和工作站或微机机群系统 ;方法也适合信号处理中的各种塔式分解过程。用 Fortran语言和 PVM编制了算法的程序。在机群系统和大规模并行机上的实验表明 ,算法是正确的且具有较高的加速比。     

主方差分析方法

该文提出一种对高维随机向量 X=( x1 ,x2 ,… ,xp)′p× 1 进行降维处理的实用方法 ,其基本思想是利用矩阵的扫描运算 ,构造 X的很少几个综合指标 (称为主方差变量 )以反映 X的统计特性。给出了该方法的理论依据和直观解释以及算法。特别指出 ,当变量 X多重相关性突出时 ,该文方法显著地优于主成分分析方法。