Waiting time analysis for a queueing system with time‐limited service and exponential timer

We consider a single‐queue with exhaustive or gated time‐limited services and server vacations, in which the length of each service period at the queue is controlled by a timer, i.e., the server serves customers until the timer expires or the queue becomes empty, whichever occurs first, and then takes vacations. The customer whose service is interrupted due to the timer expiration may be attended according to nonpreemptive or preemptive service disciplines. For the M/G/1 exhaustive/gated time‐limited service queueing system with an exponential timer and four typical preemptive/nonpreemptive service disciplines, we derive the Laplace—Stieltjes transforms and the moment formulas for waiting times and sojourn times through a unified approach, and provide some new results for these time‐limited service disciplines. © John Wiley & Sons, Inc. Naval Research Logistics 48: 638–651, 2001.     

2005～2009年《武警学院学报》文献计量分析

通过对2005～2009年《武警学院学报》5年间的载文、作者及引文情况进行统计分析,研究其载文量、栏目设置以及著者、发文地区和著者系统分布,并统计出合作度、合作类型、引文量、篇均引文数、引文语种及引文类型等,以期描述学报在改为月刊后的出版状况,从中发现一些带有规律性的问题,并客观评价其办刊特色,为刊物的进一步发展及相关学科动向提供理论依据。     

Modified couple stress and thickness-stretching included formulation of a sandwich micro shell subjected to electro-magnetic load resting on elastic foundation

This paper studies electromagnetoelastic static investigation of a sandwich doubly curved microshell subjected to multi-field loading based on a new thickness stretching included refined higher order shear/normal deformable model. Modified-couple-stress-theory (MCST) is used for accounting small-scale-dependency. The numerical results are derived using an analytical method. The effect of small scale parameter in micro scale, initial electric and magnetic potentials and foundation parameters is studied on the electromagnetoelastic bending results. It is confirmed an enhancing in stiffness of small scale shell with an increase in micro length scale parameter.     

车辆悬挂系统扭杆弹簧疲劳寿命的统计分析

本文对车辆悬挂系统扭杆弹簧的寿命作了统计分析,得到服从形状参数m=1.5～2.0的威布尔分布.论证了把可靠度R(t)=0.9的工作寿命作为规范中所规定的额定寿命值的合理性,同时对影响其寿命的若干因素进行了讨论.     

机动输油管线泄漏监测技术

机动输油管线采用露天方式快速铺设,容易发生泄漏事故。根据负压波原理,利用一种基于可变窗长中值滤波器的泄漏检测算法,在不降低检测灵敏度的前提下,能有效降低泄漏误报率。该算法在保证泄漏定位精度的同时,还能保持较高的实时性,较好地满足机动输油管线泄漏监测的需要。     

基于TSS方法的雷达性能优选分析研究

通过TSS方法进行了雷达性能的优选分析研究,分别针对雷达的单一性能指标和综合性能指标进行了优选分析。首先运用TSS方法完成了基于单一性能指标的雷达性能优选分析,然后通过欧几里德贴近度完成了雷达的综合性能指标优选分析,最后给出了TSS方法在雷达性能优选分析研究中的应用实例。     

从爱国者导弹系统的主要特点探讨对其系统干扰对抗的途径

通过爱国者导弹系统的特点和改进后与Ｓ－３００系统的主要性能进行比较,探讨对爱国者导弹系统的干扰对抗途径及我国防空系统的对策     

Analysis of some critical aspects in hot machining of Ti-5553 superalloy: Experimental and FE analysis

In this study, a newly developed titanium superalloy, i.e., the Ti-5553 alloy has used for hot machining. This material replaced Ti-grade-5 alloy in the application of aerospace, automobile, and biomedical sector. However, similar to Ti-grade-5 alloy, the Ti-5553 alloy has a low thermal conductivity which makes it difficult-to-cut material categories hence, high tool wear, cutting force and bad surface finish. Hot machining of Ti-5553 has been studied at different machining condition (room and hot) using Deform-2D finite element analysis. The result from the simulation test was compared with the experimental value and reduction of cutting and thrust forces was observed. The experiment was carried out with the same input parameters as simulation, and good coherence between them observed. Additionally, cutting zone temperature, effective stress, etc. for both room and elevated the temperature are also discussed.     

战术情报系统模型化分析方法

针对未来联合作战活动中陆军作战部队的战术应用需求,提炼出陆军战术情报系统建设的组织体系模型和情报生产区域模型,同时,以某一陆军战术作战单位为例,提出并深入分析对应情报系统节点的功能参考模型,建立了基于组织体系模型和功能参考模型的陆军战术情报系统模型化分析方法,详细描述了该模型化分析方法涉及的陆军战术情报系统的6个主要功能单元;最后简要分析了该模型化分析方法的军事应用前景.     

12.7mm高射机枪模态试验与分析

本文利用实验模态分析技术和有限元法研究机枪—土壤系统的动态特性,通过模态试验获得机枪在硬质土壤支撑条件下的低阶模态信息,据此对机枪有限元模型的边界条件进行模拟,并从动力学角度分析影响射击精度的主要因素,为进一步研究机枪结构动力修改和质量评估提供依据,