气囊辅助RTM制备复合材料承力筒内腔尺寸控制技术

根据气囊充压压力与复合材料承力筒内径之间的变化关系,给出了成型复合材料承力筒内表面的气囊尺寸计算方程。分析了气囊充压压力增大对承力筒的壁厚、纤维含量和弯曲性能的影响。采用气囊辅助RTM工艺整体制备出复合材料承力筒。试验结果表明,气囊充压压力使复合材料承力筒的壁厚减薄,纤维体积含量增加,弯曲性能提高;选择适当的气囊充压压力可以制备出满足设计要求的复合材料承力筒。     

卫星任务调度问题的约束规划模型

卫星任务规划与调度是空间资源管理的重要内容之一,其目的在于为卫星系统的任务计划编制提供科学合理的决策手段与依据。卫星任务调度问题的重要特点在于,调度任务存在可见时间窗口约束。只有在可见时间窗口内,调度任务才可能执行并完成。在进行合理假设的基础上,建立卫星任务调度问题的约束规划模型。对基本禁忌搜索算法进行改进,提出了模型求解的变邻域禁忌搜索算法。应用结果表明,约束规划模型的建立与求解是合理的。     

Sensor radiation interception risk control in target tracking

This paper is mainly on the problem of radiation interception risk control in sensor network for target tracking. Firstly, the sensor radiation interception risk is defined as the product of the interception probability and the cost caused by the interception. Secondly, the radiation interception probability model and cost model are established, based on which the calculation method of interception risk can be obtained. Thirdly, a sensor scheduling model of radiation risk control is established, taking the minimum interception risk as the objective function. Then the Hungarian algorithm is proposed to obtain sensor scheduling scheme. Finally, simulation experiments are mad to prove the effectiveness of the methods proposed in this paper, which shows that compared with the sensor radiation interception probability control method, the interception risk control method can keep the sensor scheduling scheme in low risk as well as protect sensors of importance in the sensor network.     

Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.     

Experimental study on the detonation process of a pulse detonation engine with ionized seeds

An experimental platform of a pulse detonation engine (PDE) was established to study the effect of different K₂CO₃ ionized seed mass contents on the detonation process. The pressure and ion concentration were detected in the detonation process of the PDE with different contents of ionized seeds. The initiation process of the PDE at different ignition frequencies was studied. The results show that the gas conductivity in the detonation process increased by adding ionized seeds to the PDE tube, and the conductivity increased with the increase in ionized seed mass content. With the increase in ionized seed mass content, the range of the conductivity decreased. The PDE was successfully ignited and formed a stable detonation wave at ignition frequencies of 5 Hz and 10 Hz, and the peak pressure of the stable detonation with the ignition frequency of 5 Hz was 17% higher than that with an ignition frequency of 10 Hz. The detonation wave intensity was weakened and degenerated to a shock wave that propagated in the tube without the fuel filled at the ignition frequency of 20 Hz.     

Bringing Military Conduct out of the Shadow of Law: Towards a Holistic Understanding of Rules of Engagement

In this article, I outline a holistic approach to the military concept of “Rules of Engagement” (ROE), which complements the legal aspects of ROE with considerations of operational and political requirements for the use of military force. Drawing upon two illustrative cases from the US military experience with the use of ROE, I demonstrate that ROE for any particular military operation should be formulated to balance optimally, if not harmonize fully, the legal, operational and political concerns related to the use of force. In this task, political decision-makers and military practitioners alike are confronted with unavoidable and real-life dilemmas. How these dilemmas are handled has significant implications for how legal requirements concerning accountability and concerns for civilian lives in military combat can be preserved through ROE.     

浅海中时谐水平电偶极子在空气中的极低频磁场

为深入分析空气中的极低频磁场,用时谐水平电偶极子等效船舶被主轴调制的水下腐蚀相关电流。根据Maxwell方程组和电磁场边界条件建立浅海条件下电偶极子在空气中的矢量磁位模型,进一步推导了磁场表达式,并利用快速汉克尔变换计算磁场的传播规律。测量了水池碳棒电极和海上钛基电极的磁场,验证了磁场的实用性和模型的有效性。     

机载航电系统射频隐身性能多域联合评估方法

针对机载航电系统自身辐射源特性,提出一种不依赖敌方探测设备的机载航电系统射频隐身性能评估方法。分析机载航电系统设备在极化域、波形域、能量域中影响射频隐身性能的因素,构建极化域、能量域、波形域射频隐身指标,打破常规的"辐射-接收"模型的隐身性能评估方法,建立基于机载航电系统自身辐射信号工作状态和工作参数的射频隐身定量评估方法。对机载雷达系统进行仿真评估,结果表明,该评估方法能正确反映机载雷达系统的射频隐身性能。     

基于SINS/GPS组合导航的AUV半实物仿真系统设计(英文)

为了满足水下航行远航程和长时间的要求,远航程自主水下航行器(AUV)采用的是以SINS导航为主、卫星导航定期修正的方式,以提高导航的精度和可靠性.设计一种采用GPS卫星定位导航模拟器、GPS接收机、惯性测量器件(IMU)和实时仿真计算机构成的采用SINS/GPS组合导航方式的AUV导航半实物仿真系统,并对该系统的硬件接口设计、算法和软件开发进行了论述.所开发的系统通过外部的线运动补偿实现了惯性导航系统的完整计算,通过时间同步策略解决了各导航子系统的并行同步问题.部分仿真试验的结果表明,所设计的半实物仿真系统方案可行,可用于更高置信度的AUV组合导航仿真实验.