网络图的自动生成算法及其系统实现

研究了网络自动生成的实现算法和系统实现技术。该算法按路线来画结点 ,将其区分为不同的层 ,再绘制路径。先画出所有关键路 ,确定关键节点的坐标 ;然后对于未确定坐标的结点 ,寻找其由关键结点出发再回到关键结点的最短路径 ,将该路径上的结点画为一层 ,按不同的路线分为不同的层次进行绘制 ,直到所有结点均确定坐标。然后确定路线的层次 ,最后统一协调规整。以此算法开发的软件系统可节省时间 ,并可保证生成规范的网络图。     

基于Dijkstra算法的水平航迹规划

战术飞行任务的航迹规划是依靠地形信息和敌情信息,在某些约束条件下,找出作战飞机从起飞点到目标突防生存概率最大、航程最短的飞行轨迹的过程。采用简易方法建立了威胁模型,用Dijkstra算法实现了作战飞机整体最优水平航迹解算,并给出了具体算例,验证了算法的有效性和实用性。     

多传感器系统纯方位定位与可观测性分析

对多静止测向站系统的可观测性、定位方法进行了分析和研究。通过运动等效,将多静止站系统转化成一个特殊的单运动测向站问题。采用拟线性方法,建立了纯方位多传感器系统目标定位问题的数学描述,并分析了系统的可观测性条件。提出了两种目标被动定位的融合递推算法,它们可以以标量的形态递推计算,具有实时性高、可计算性好的优点。     

一座小型建筑空调动态负荷的ANN预测研究

人工神经网络(Artificial Neural Network,简称ANN)是一种崭新非线性建模和预测方法,具有良好的非线性品质和极高的拟合精度。在前人研究的基础上,针对一座小型建筑物建立了其空调动态负荷预测的BP模型。为克服常规BP训练算法的缺陷,提出了一种改进的遗传搜索算法,结果证明是一种高效实用的算法。     

基于遗传算法的红外图像增强研究

红外图像侦察是一种重要的航空侦察方式。遗传算法目前已在图像处理领域得到了很好的应用。本文将遗传算法引入红外图像增强,使用红外图像的参数模型将图像增强转化为参数的优化。实验结果表明,该方法是一种有效的图像增强方法。     

Estimating distribution functions from partially observed samples

Suppose that some components are initially operated in a certain condition and then switched to operating in a different condition. Working hours of the components in condition 1 and condition 2 are respectively observed. Of interest is the lifetime distribution F of the component in the second condition only, i.e., the distribution without the prior exposure to the first condition. In this paper, we propose a method to transform the lifetime obtained in condition 1 to an equivalent lifetime in condition 2 and then use the transformed data to estimate F. Both parametric and nonparametric approaches each with complete and censored data are discussed. Numerical studies are presented to investigate the performance of the method. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 521–530, 2000     

Investigation on the spatial distribution characteristics of behind-armor debris formed by the perforation of EFP through steel target

The behind-armor debris (BAD) formed by the perforation of an EFP is the main damage factor for the secondary destruction to the behind-armor components. Aiming at investigating the BAD caused by EFP, flash X-ray radiography combined with an experimental witness plate test method was used, and the FEM-SPH adaptive conversion algorithm in LS-DYNA software was employed to model the perforation process. The simulation results of the debris cloud shape and number of debris were in good agreement with the flash X-ray radiographs and perforated holes on the witness plate, respectively. Three-dimensional numerical simulations of EFP's penetration under various impact conditions were conducted. The results show that, an ellipsoidal debris cloud, with the major-to-minor axis radio (a/b) smaller than that caused by shaped charge jets, was formed behind the target. With the increase of target thickness (h) and decrease of impact velocity (v₀) and obliquity (θ), the value of a/b decreases. The number of debris ejected from target is significantly higher than that from EFP. Based on the statistical analysis of the spatial distribution of the BAD, An engineering calculation model was established considering the influence of h, v₀ and θ. The model can with reasonable accuracy predict the quantity and velocity distribution characteristics of BAD formed by EFP.     

强化学习框架下移动自组织网络分步路由算法

移动自组织网络是一种无基础设施、由移动通信节点组成的无线网络,具有高动态特性。传统的路由协议并不能适应节点移动性带来的频繁拓扑变化,简单的洪泛路由也会因开销过大降低网络的性能。针对如何在移动自组织网络中自适应地进行路由选择,提出强化学习框架下的分步路由选择算法。该算法以最小链路总往返时延为目标,基于强化学习进行路由搜寻,在筛选出符合目标需求节点集合的基础上,结合置信度选择路由。在链路变得不可靠时,数据包被广播给筛选出的邻居节点集以提升路由可靠性并降低开销。对提出的算法在分组到达率和路由开销等主要性能指标进行数值仿真分析。仿真结果表明,提出的分步路由算法相比于基于强化学习的智能鲁棒路由,在降低开销的同时,保持着相当的吞吐率。     

基于切比雪夫神经网络的软件定义卫星网络智能路由策略

针对现有的软件定义卫星网络中流表占用的三态内容寻址存储器空间不断增加,复杂的流表项查找、匹配过程导致路由转发效率降低,无法满足多样化应用需求的问题,提出基于神经网络的软件定义卫星网络智能路由架构。控制器通过训练神经网络获取数据流的传输模式,并用训练后的神经网络代替流表,在此基础上提出基于Chebyshev神经网络的智能路由策略,交换机根据数据流的业务类型预测其转发路径,以满足卫星网络应用的服务质量要求。仿真结果表明:所提路由策略显著减少了占用的三态内容寻址存储器存储空间,提高了路由效率。     

基于粒子群算法的宽带真延时平面阵列方向图综合

针对大阵元间距平面阵列方向图综合问题,提出基于粒子群算法的宽带真延时平面阵列方向图综合方法。该方法根据真延时条件下阵列方向图主瓣和栅瓣指向的特点,采用宽带真延时抑制阵列方向图的栅瓣;利用粒子群优化算法优化阵列结构,得到具有较高主副瓣比的平面阵列方向图。通过对8×8的矩形平面阵进行仿真,验证了所提方法的有效性,在此基础上,还仿真研究了该方法对栅瓣的抑制性能与信号带宽之间的关系。