基于扩展多模型自适应估计的运载火箭伺服机构故障检测与诊断

针对运载火箭伺服机构故障,提出了一种基于扩展多模型自适应估计的故障检测与诊断算法。首先建立了考虑伺服机构故障的运载火箭姿态动力学模型,其次将故障角度作为状态变量得到增广状态空间模型,然后利用扩展卡尔曼滤波器进行状态向量和故障参数的非线性估计,并基于传感器测量数据采用假设检验算法在线计算故障发生的概率,最后给出了基于扩展多模型自适应估计的故障检测与诊断算法流程。该方法的优点是只用一个扩展卡尔曼滤波器就可完成一个伺服机构的故障检测与诊断,从而大幅减小用于伺服机构故障检测与诊断的滤波器数量。仿真结果表明,该方法在无故障时可对伺服机构进行健康监测,在单台伺服机构故障下,可以及时准确判断出哪一台芯级伺服机构发生故障,并可准确估计出伺服机构故障下的发动机摆角角度。     

基于多传感器信息系统的仿人机器人步态规划算法改进研究

摘要：基于视觉传感器、角度传感器和力／力矩传感器组成的多传感器信息系统,对仿人机器人理想的步态规划算法进行了改进．以双目视觉立体标定原理处理视觉传感信息,从而判断目标距离及目标路径的可达性;通过角度传感器获取实时旋转角度,经参数调整减小执行误差;根据力／;5矩传感信息对支撑脚踝关节的侧摆角度进行增量式补偿．经实验验证,改进后的算法对机器人的步态稳定性控制具有良好的效果．     

音圈电机驱动的超精密快刀伺服系统的性能研究

基于快刀伺服系统的超精密金刚石车削加工技术是光学自由曲面高效率、高精密的加工手段。本文介绍了一种新的音圈电机驱动的超精密快刀伺服系统,行程达到30mm,最大加速度为920m/s₂。通过实验手段获得了系统的运动模型,来用于控制器的设计。针对一类典型的光学自由曲面-微透镜阵列进行了加工,并对加工结果进行了测试与分析。测试结果表明,所研制的快刀伺服系统达到了加工技术要求,为以后该系统在实际加工中更广泛的应用研究打下了基础。     

Numerical and experimental study on the response characteristics of warhead in the fast cook-off process

The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement. The goal of this study is to obtain data on the warhead in the fast cook-off process. In this paper, a numerical calculation method is proposed, whose reliability is supported by comparison with experimental results. Through the numerical calculation, the temperature distribution, temperature change, and ignition time are acquired. The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive's outer surface is 238.3 C at the ignition time. The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation. The experimental results show that the overpressure fails to reach the preset minimum value which is equivalent to 6 kg of TNT and that the reaction grade is deflagration. The research results have reference value for the design of the warhead and the reduction of detonation risks.     

中继卫星调度问题的CSP模型

中继卫星在地球同步静止轨道上运行,既能直视中、低轨道用户航天器,又能直视地面站,是沟通用户航天器与地面站的桥梁。中继卫星调度问题是一类非常重要的调度问题。基于约束满足理论,通过分析中继卫星调度问题的特点与约束条件,建立了中继卫星调度问题的CSP模型。利用卫星工具箱STK进行模拟仿真,对CSP模型进行了求解。结果表明,所建立的CSP模型是合理的。     

导弹发射装置伺服系统模糊PID控制研究

在某型导弹发射装置的伺服系统中,对系统的性能指标要求很高,传统的PID控制往往难以满足要求。以某型导弹发射装置的伺服系统为模型,设计了模糊PID控制器。通过与传统的PID控制器仿真实验对比,可以看出应用模糊PID控制器能够有效提高该伺服系统的动态性能和鲁棒稳定性。     

Opportunistic retooling of a flexible machine subject to failure

A set of jobs can be processed without interruption by a flexible machine only if the set of tools required by all jobs can be loaded in the tool magazine. However, in practice the total number of tools required by a job set would exceed the tool magazine capacity. In such situations, the job set has to be carefully partitioned at the start of the production run such that each partition can be processed without interruption. During the production run, if there are unscheduled machine downtimes due to machine failure, this provides an additional opportunity to optimally retool the magazine for a smaller job set consisting of just the unprocessed jobs. In this paper, we study job sequencing rules that allow us to minimize the total expected cost of machine down time due to machine failures and magazine retooling, assuming a dynamic re‐sequencing of the unprocessed jobs after each machine failure. Using these rules, we develop a branch‐and‐bound heuristic that allows us to solve problems of reasonable size. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 79–97, 2001     

火控系统随动系统动态仿真库的构建

以陆军火控系统中的随动系统为研究对象 ,按照随动系统的类型利用 MATL AB/ SIMU L INK建立了一个随动系统的动态仿真库。该仿真库的建立 ,为对随动系统进行分析、研究和比较同类系统的性能提供了一个软件平台。同时 ,利用它对新提出的一些改进算法和设计方案进行验证 ,为新型号随动系统的设计提供了可靠的参考依据     

MLFMA在运动目标多普勒回波数值仿真中的应用

提出了一种应用准静态技术,结合快速多级子算法计算任意形状的运动目标多普勒信号的方法,对目标的几种典型的微动多普勒信号进行了仿真,并应用高分辨时频分析算法对仿真得到的微多普勒信号进行了分析,提取出了微多普勒瞬时频率,并与相应微动规律的点目标微多普勒瞬时频率进行对比。结果表明,二者具有相同的变化规律,从而证明本文提出的方法是有效的。     

音圈式快速伺服刀架的分析与设计

自由曲面光学零件面形复杂,快刀伺服车削加工是其高效加工手段.针对压电陶瓷型伺服刀架行程小,加工能力有限的问题,提出一种基于音圈式直线电机驱动的快刀伺服方案.音圈式快速伺服刀架行程大,可大大拓宽快刀伺服加工范围.以典型光学零件加工为例,对快速伺服刀架所应具备的关键性能指标进行分析,给出了音圈电机的结构,对音圈式伺服刀架进行了理论建模、控制器设计以及实际性能测试.测试结果表明,所设计的音圈式伺服刀架行程大、频响高,在刀架行程为±100μm时可达到300Hz的频响能力,同样行程下的频响指标优于国外同类产品.