跨音速流动中涡轮动叶叶顶的气膜冷却特性分析

为了掌握跨音速流动中涡轮动叶叶顶气膜冷却特性,采用压敏漆测试技术来研究叶顶间隙高度和质量流量比对叶顶气膜冷却特性的影响规律。研究结果表明:在小质量流量比条件下,增加叶顶间隙高度能够有效改善叶顶中弦区域的气膜覆盖,然而当质量流量较大时,叶顶间隙高度变化对叶顶中弦区域的气膜冷却效率分布影响并不明显;在小叶顶间隙高度条件下,随着质量流量比增加,叶顶中弦区域冷气覆盖效果逐渐变差,在大叶顶间隙高度条件下,仅当质量流量比从0.1%+0.05%增加到0.14%+0.07%时,叶顶中弦区域的冷气覆盖效果才有所改善。     

发射波束域MIMO-STAP雷达发射接收联合设计方法

研究了信号相关杂波背景下机载多输入多输出(multiple-input multiple-output,MIMO)雷达发射波束形成和接收滤波器的联合设计问题,建立了机载MIMO雷达发射波束域空时自适应处理(space-time adaptive processing, STAP)信号模型。为了提升杂波环境下目标的检测性能,通过最大化输出信干噪比构建了发射波束形成和接收滤波器的联合设计问题;然后,设计了一种新的基于优化最小化(majorization-minimization,MM)框架的迭代优化算法来解决联合设计问题。该算法通过合理寻找目标函数的下界可以有效提升算法的收敛速度并降低算法的运行时间。此外,与传统的相控阵雷达和MIMO雷达相比,优化后的发射波束形成和接收滤波器可以显著提升输出信干噪比,仿真实验验证了所提方法的有效性。     

部分驻留时间干扰对跳频同步及跟踪影响分析

扫频式干扰、更高跳速碰撞干扰等新的干扰方法成为跳频通信系统电子对抗领域中又一重要研究方向.在跳频通信系统每跳驻留时间内,这些新的干扰方法仅能干扰其中一小部分.为此,在对跳频通信系统研究基础上,重点分析了部分驻留时间干扰对跳频通信系统同步及跟踪的影响.进一步进行了仿真与分析,结果表明在一定干信驻留时间比情况下,部分驻留时间干扰的有效性,从而为针对跳频通信系统进行对抗提供相关方法.     

利用卷积神经网络的太赫兹孔径编码增强成像

针对现有太赫兹孔径编码成像算法鲁棒性较差、计算求解复杂度较高等问题,提出基于卷积神经网络的太赫兹孔径编码增强成像方法.该方法通过构建一个端到端的神经网络来实现成像系统的隐式建模,利用网络强大的求逆能力和抗噪性能来实现低信噪比下的目标重构.通过仿真实验可以看出,该方法可以在不同信噪比下实现对不同稀疏度目标的重构.另外,与...     

等效载噪比评估全球导航卫星系统接收机误码率的适应性分析

等效载噪比是全球导航卫星系统接收机捕获、数据解调和跟踪性能的重要指标。近年来,研究人员取得大量以等效载噪比为指标的干扰影响分析研究成果,但鲜有等效载噪比适应性分析。为此,展开等效载噪比适应性研究。在推导单频干扰下接收机等效载噪比和误码率模型基础上,得出特定条件下等效载噪比评估数据解调性能失效的结论。同时,深入分析等效载噪比失效的机理,给出等效载噪比指标的适用条件。仿真实验验证了理论分析的正确性。     

Analysis of down times of jib cranes—A stochastic approach

In this paper a case study dealing with the maintenance problem of jib cranes is presented. A jib crane is viewed as a complex system whose performance is observed as a single realization over period of time. After pointing out limitations of existing stochastic models to analyze the observed realization a new family of bivariate stochastic processes is introduced. The data of jib crane is analyzed using new model and cross‐validated using part of the data set. It is noted that the new family of stochastic processes is useful to analyze bivariate data where one of the variables is finitely valued and the other is nonnegative and continuous. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 231–243, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10006     

滑翔增程弹滑翔弹道优化设计分析

针对鸭式布局的滑翔增程弹,建立了滑翔增程弹滑翔弹道的模型,采用使滑翔弹道上每一点的升阻比最大的设计思想进行弹道优化设计,导出了俯仰舵偏角与平衡攻角的表达式,并对滑翔飞行弹道特性进行了仿真计算分析.仿真计算表明,滑翔弹道与常规弹道降弧段相比下降趋缓,增程效果显著.     

离子束加工误差对散射损失的影响研究

离子束加工(Ion Beam Figuring,IBF)去除函数对加工残差具有重要的影响,而加工残差引起的表面散射则导致光学性能发生变化.为了减小加工残差对光学性能的影响,利用基于CCOS成形原理的离子束加工仿真程序对光学镜面进行修形,分析不同去除函数宽度对散射损失(Ratio of Scattering Loss,RSL)指标的影响.通过研究可知,随着去除函数宽度的减小,加工残差对散射损失的影响越来越小.因此,根据加工残差对RSL指标的影响程度以及RSL指标要求,可以合理选择去除函数宽度,从而在满足面形精度的同时,优化加工工艺.     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

并联TBCC动力对高超声速飞行器性能的影响

针对马赫数为6的一级高超声速巡航飞行器的动力需求,提出涡轮/亚燃冲压/双模态超燃冲压组合动力（T/RJ/DMSJ）和射流预冷涡轮/亚燃冲压/双模态超燃冲压组合动力(PCT/RJ/DMSJ)两种方案。在给定的飞行任务下,分析起飞推重比分别为0.8和1.0时,飞行器完成任务时的航程和飞行时间,并对比了PCT/RJ/DMSJ在两种工作模态下的性能。研究结果表明：在相同的起飞推重比下,两种组合动力方案的航程和飞行时间相差不大。当起飞推重比为0.8时,采用PCT/RJ/DMSJ组合动力方案比T/RJ/DMSJ组合动力方案的航程高出3.6%,飞行时间高出3.8%;当起飞推重比为1.0时,PCT/RJ/DMSJ的航程和飞行时间比T/RJ/DMSJ的分别高出4.6%和4.8%。在小推重比下,跨声速段的燃料消耗和飞行时间占整个加速爬升段的比例较大,随着推重比的增加,这个比例减小,巡航可用的燃料比例增大,巡航距离增加,提高起飞推重比可以提高超声速飞行器的航程并缩短飞行时间。