圆柱壳体振动特性研究与有限元计算验证

采用解析理论和有限元方法研究计算了圆柱壳体的固有频率与固有振型,发现环向封闭的圆柱壳具有同一节点形式的两种固有振型,对应两种固有振型的固有频率值相同。     

关于有限时间热力学的最小熵产生最大值原则

本文力图从能表征状态的热力学参数熵的变化中找到有关有限时间热力学新的分析方法,提出了工作参数选择的最小熵产生最大值原则。这个原则揭示了有限时间热力学以时间为基础的“率”与非平衡热力学熵产生间的内在联系。据此,我们便可得到正、反向内可逆卡诺循环的最佳工作参数。为有限时间热力学的普遍应用研究提供了一新的线索。     

光纤陀螺温度场分析及结构优化设计

从导热微分方程出发,建立了光纤陀螺温度场有限元模型,对模型进行了稳态温度场和瞬态温度场仿真分析。利用铂电阻测温电路对仿真结果进行实验验证,两者相对误差小于3%,证明仿真分析的结果是正确和有效的。针对光纤环温度场分布不均匀的情况,对光纤陀螺结构进行了优化设计。光纤陀螺在25℃环境中稳定工作时,稳态温度场分析结果表明,优化设计后光纤环最高与最低温度差为0.05℃,较优化前的0.19℃减小了73.7%;将陀螺置于60℃环境且处于非开机状态时,10min瞬态温度场分析结果表明,优化设计后光纤环最高与最低温度相差0.11℃,较优化前的0.19℃减小了42.1%。     

Trade,conflict and alliances

This study examines the relationship between alliance conflict and international trade. Two schools of thought exist on this issue: some prominent writers suggest that alliance conflict reduces trade between two countries (the externality cost argument), while others suggest that it increases trade between certain countries at the cost of others (the alignment incentive argument). The study empirically tests the two propositions by analyzing the data on trade and conflict during the post‐WWII period. It is found that the relationship between trade and alliance conflict is statistically significant. The externality cost phenomenon occurs to allies, whereas the alignment incentive argument is true of neutrals. In addition, the findings of this study support the fundamental assumptions and major results in the studies of trade and conflict at the dyadic level.     

An informal framework to aid the analysis and design of military posture

The design of military posture is an exercise in confronting potential enemies’ capabilities within the context of geographic, technological, temporal, political and economic constraints. No formal model is capable of encapsulating the essentials of so complex an environment for closed or simulated analysis, but it is useful to have an informal framework within which to reason interactively within these dimensions.

This paper presents such a scaffolding, patterned on the notion of a military posture as the output of an economic process whose structure reflects important determinants of the characteristics and extents of weaponry and expenditures that are appropriate to the environment within the feasibility set determined by the constraints. The analysis remains at an abstract level, but it does highlight the important shifts toward preparation for littoral warfare, greater reliance on reserve rather than active forces, and necessary changes in missions among military departments.     

基于FDTD方法的电波在等离子体中传输特性研究

根据时域有限差分法(Finite Difference Time Domain, FDTD)的基本原理,本文首先分析了等离子体的物理场特性及数值计算,然后介绍了飞行器再入时等离子鞘的形成以及等离子体相对介电常数对波的衰减,最后通过三维FDTD和二维FDTD模拟了电磁波在等离子体中的传播情况,证明了FDTD方法是解决电磁波在复杂媒质中传播的一种有效方法,并探究了飞行器再入段黑障区通信的理论和方法。     

基于轴对称内聚力单元的立贮发动机黏接界面结构完整性分析

建立轴对称内聚力单元是进行立贮发动机黏接界面应力分析的重要手段。在变形后的轴对称内聚力单元上建立参考坐标系,推导了单元节点位移在参考坐标系和全局坐标系下的转换关系。基于单元分离位移推导了单元内力矢量和单元刚度矩阵。开展了旋转体的分离测试,验证了轴对称内聚力单元的准确性和高效性。针对立贮发动机,先后开展了轴向加速度以及波浪载荷作用下的发动机结构分析,重点研究了黏接界面上应力的大小以及分布规律。研究方法和结论可以为发动机黏接界面结构分析提供有利参考。     

The properties of Sn–Zn–Al–La fusible alloy for mitigation devices of solid propellant rocket motors

The Al and La elements are added to the Sn9Zn alloy to obtain the fusible alloy for the mitigation devices of solid propellant rocket motors. Differential scanning calorimetry (DSC), metallographic analysis, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), tensile testing and fracture analysis were used to study the effect of Al and La elements on the microstructure, melting characteristics, and mechanical properties of the Sn9Zn alloy. Whether the fusible diaphragm can effectively relieve pressure was investigated by the hydrostatic pressure at high-temperature test. Experimental results show that the melting point of the Sn9Zn-0.8Al0·2La and Sn9Zn–3Al0·2La fusible alloys can meet the predetermined working temperature of ventilation. The mechanical properties of those are more than 35% higher than that of the Sn9Zn alloy at −50 °C–70 °C, and the mechanical strength is reduced by 80% at 175 °C. It is proven by the hydrostatic pressure at high-temperature test that the fusible diaphragm can relieve pressure effectively and can be used for the design of the mitigation devices of solid propellant rocket motors.     

数值模拟金属靶抗侵彻中的网格密度影响研究

在数值模拟中,有限元网格的数量对计算结果和计算成本都有较大的影响。采用MSC.Patran建立了弹体侵彻金属靶板的计算模型,并利用MSC.Dytran对所建模型进行了计算;结合相关的理论,对不同网格密度划分的有限元模型的计算结果进行了分析,并和实验进行了对比,得到了数值模拟弹体侵彻金属装甲中靶板的最佳网格数量。当网格无因次量μ=0.10时,所得到的数值模拟结果与实际吻合得较好:当厚度方向的网格数取为12个时,文中所采用的模型能较好地模拟弹体对靶板的侵彻效果。     

辐射率对导弹仪器舱温度分布影响的研究

以某远程防空导弹仪器舱为研究对象,描述导弹的工作环境,对仪器舱的热响应过程进行分析建模,然后利用有限元软件对仪器舱温度场进行分析,研究隔热层和仪器外壳辐射率对仪器舱温度场的影响,得到了一定的数据资料和有价值的结论,为仪器舱的防热结构设计提供参数。