短纤维复合材料的随机微结构力学分析

利用随机介质微观力学方法对纤维大小、方向随机分布的短纤维复合材料弹性模量进行了计算。给出了与微观性能相联系的复合材料弹性模量计算公式。对铝基碳化硅增强短纤维复合材料进行了计算及实验验证。     

一种高精度快速复合轴伺服系统分析─—数字位置差动瞄准线独立控制系统补充分析

本文是数字位置差动瞄准线独立控制系统的补充分析。重点分析了包括在其中的双检测器并联复合轴伺服系统开环和闭环传递函数,从中揭示了复合轴伺服系统高精度的本质。     

安静型夹芯复合材料舵设计及其力学性能分析

通过对夹芯复合材料各层材料的选择,以及夹芯复合材料舵壳的结构设计,提出了夹芯复合材料舵的设计方案和制作工艺。并利用有限元方法计算了复合材料舵壳在流体压力作用下的应力和变形,以及在瞬态载荷作用下舵壳的振动响应。计算结果表明,夹芯复合材料舵壳满足结构的强度和刚度的要求,同时振动水平与钢舵比较有很大的改善。     

SiCf/Si-O-C复合材料的抗氧化、抗热震性能研究

通过研究材料的氧化前后质量的改变和强度减少及氧化前后微观结构的变化,研究了先驱体转化法制备的SiCf/Si-O-C复合材料的抗氧化、抗热震性能。结果表明SiCf/Si-O-C复合材料具有良好的抗氧化、抗热震性能。对所得材料微观结构进行了分析讨论,发现界面结构的变化是影响SiCf/Si-O-C复合材料抗氧化、抗热震性能的主要原因。     

Matrix-geometric solution of discrete time MAP/PH/1 priority queue

We use the matrix-geometric method to study the discrete time MAP/PH/1 priority queue with two types of jobs. Both preemptive and non-preemptive cases are considered. We show that the structure of the R matrix obtained by Miller for the Birth-Death system can be extended to our Quasi-Birth-Death case. For both preemptive and non-preemptive cases the distributions of the number of jobs of each type in the system are obtained and their waiting times are obtained for the non-preemptive. For the preemptive case we obtain the waiting time distribution for the high priority job and the distribution of the lower priority job's wait before it becomes the leading job of its priority class. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 23–50, 1998     

聚钛碳硅烷的新合成法及其研究

从聚硅烷(PS)与钛酸丁酯。(Ti(OBu)_4)出发,不采用任何反应促进剂直接合成了含钛碳化硅纤维的先驱体聚钛碳硅烷(PTC)。在这一反应中,PS 首先裂解成含Si—C 骨架与Si—H 键的低分子聚硅烷(LPS)。然后,由LPS 中的Si—H 键与Ti(OBu)_4的反应以及LPS 的Si—Si 骨架裂解转化为Si—C 骨架的反应制得了PTC.本文对这种新合成法所涉及的反应过程进行了研究,并比较了新旧两法得到的PTC—1与PTC—Ⅱ的结构异同,报告了以新法制得的PTC—Ⅱ为先驱体得到的含钛碳化硅纤维的优良性能。     

大肠杆菌转录起始位点的计算定位方法

根据已有的启动子识别算法,提出了一种基于滑动窗口的大肠杆菌转录起始位点(TSS)计算定位方法,通过在启动子信号特征中引入复合模式来改进识别分类器,并将其用于滑动窗口序列,在合理限定的TSS定位范围内依次计算各个序列位置的TSS似然得分,再利用TSS与翻译起始位点(TLS)的距离分布信息作为TSS的位置得分,两者相结合来进行位置预测。对大肠杆菌真实数据的测试表明,算法可以大幅度减少假阳性结果,实现对真实TSS位置的有效预测。     

多管火箭武器储运发射箱长期储存蠕变性能预测

为探究火箭武器储运发射箱长期储存的蠕变性能,制备复合材料层压板并开展单轴拉伸蠕变试验,获得了单向纤维复合材料主方向的蠕变本构模型参数。采用有限元方法并借助用户自定义材料子程序建立储运发射箱长期储存蠕变的数值分析模型,预测了堆码储存15年后底层发射箱的蠕变变形。以储存后的发射箱作为初始状态建立弹管耦合发射动力学仿真计算模型,进一步分析蠕变对火箭弹发射过程的影响。仿真结果表明:蠕变引起的定向器平行度和发射箱底面平面度的变化均小于技术指标规定值,定向器束的最大残余变形在三维空间内呈马鞍状分布,上、下两行中间位置定向器的变形最大,左、右两列中间位置定向器的变形最小。定向器蠕变变形使得弹管间隙减小,火箭弹在管内运动使弹管之间的动态接触碰撞力增大,离轨速度降低。     

Numerical simulation of the blast wave of a multilayer composite charge

The numerical simulation of a blast wave of a multilayer composite charge is investigated. A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program. Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25–0.5 cm and 1–3 cm. The Euler––flux-corrected transport solver is found to be suitable for the far-field calculation after mapping. A numerical simulation is conducted to study the formation, propagation, and interaction of the shock wave of the composite charge for different initiation modes. It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge. Additionally, it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation, and the peak pressure of the shock wave exponentially decays, fitting the calculation formula of the peak overpressure attenuation under different initiation modes, which is obtained and verified by experiment. The difference between numerical and experimental results is less than 10%, and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.     

Novel approach for active vibration control of a flexible missile

This paper investigates the feasibility of using an active dynamic vibration absorber (ADVA) for active vibration control of a flexible missile system through simulation. Based on the principles of a dynamic vibration absorber (DVA), a ring-type ADVA is first designed to attenuate the elastic vibration of the flexible missile, and the design of the active controller adopts the proportional-integral-derivative (PID) control algorithm. The motion equations of a flexible missile with an ADVA, which is subjected to follower thrust at its aft end, are derived using the Lagrangian approach. Taking the minimum of the root mean square (RMS) of the lateral displacement response of the center of mass as the objective function, a genetic algorithm (GA) is used to optimize the parameter of the DVA and PID controller. The numerical calculations show that the ADVA and DVA are effective in suppressing the vibration and provide approximately 41.2% and 17.6% improvement, respectively, compared with the case of no DVA. The ADVA has better performance than the DVA. When the missile is subjected to follower thrust, the effect of vibration reduction is more effective than the case without follower thrust. It is feasible to reduce vibration and improve the stability of flexible missiles by means of the ADVA.