Experimental and numerical study of the fragmentation of expanding warhead casings by using different numerical codes and solution techniques

There has been increasing interest in numerical simulations of fragmentation of expanding warheads in 3D. Accordingly there is a pressure on developers of leading commercial codes, such as LS-DYNA, AUTODYN and IMPETUS Afea, to implement the reliable fracture models and the efficient solution techniques. The applicability of the Johnson–Cook strength and fracture model is evaluated by comparing the fracture behaviour of an expanding steel casing of a warhead with experiments. The numerical codes and different numerical solution techniques, such as Eulerian, Lagrangian, Smooth particle hydrodynamics (SPH), and the corpuscular models recently implemented in IMPETUS Afea are compared. For the same solution techniques and material models we find that the codes give similar results. The SPH technique and the corpuscular technique are superior to the Eulerian technique and the Lagrangian technique (with erosion) when it is applied to materials that have fluid like behaviour such as the explosive and the tracer. The Eulerian technique gives much larger calculation time and both the Lagrangian and Eulerian techniques seem to give less agreement with our measurements. To more correctly simulate the fracture behaviours of the expanding steel casing, we applied that ductility decreases with strain rate. The phenomena may be explained by the realization of adiabatic shear bands. An implemented node splitting algorithm in IMPETUS Afea seems very promising.     

不同截面形状复合长杆弹对陶瓷复合靶板侵彻研究

采用数值模拟技术研究了由3种不同截面形状的钨芯外包覆一层钢,形成的钢包覆层复合长杆弹在入射速度为1200m/s～1700m/s时对陶瓷/金属复合靶板的侵彻过程。结果表明:对于同一入射速度、相同弹体长度、同种材料的弹芯和包覆层以及靶板材料而言,等面积的六边形截面钨芯复合长杆弹的侵彻深度明显大于圆形及方形截面,方形及六边形截面与和它们等外接圆形成的圆形截面复合长杆弹侵彻深度没有明显差别,本研究认为这是与不同截面钨芯的外接圆直径直接相关。六边形截面长杆弹侵彻过程中的自锐化现象是其侵彻深度明显大于其它两种弹体的主要原因。     

基于层裂机理的弹体侵彻混凝土的工程模型

以斜侵彻过程中的终点弹道为研究对象,基于动态球形空腔膨胀理论给出的阻力函数理论公式和开坑阶段的表面层裂机理,建立了能够综合考虑弹头形状、开坑区深度的斜侵彻深度预测模型,并进一步推导了能够适用不同弹头形状的弹体过载时程曲线计算公式。预测模型得到的侵彻深度和过载与试验结果吻合较好。研究结果可为弹体与混凝土靶的斜侵彻弹道分析和弹丸头部设计提供一定帮助。     

基于层裂机理的弹体侵彻混凝土的终点弹道研究

基于动态球形空腔膨胀理论给出的阻力函数理论公式和开坑阶段的表面层裂机理,建立了能够综合考虑弹头形状、开坑区深度的斜侵彻深度预测模型,并进一步推导了能够适用不同弹头形状的弹体过载时程曲线计算公式。预测模型得到的侵彻深度和过载与试验结果吻合较好。研究结果可为弹体与混凝土靶的斜侵彻弹道分析和弹丸头部设计提供一定帮助。     

新型导爆索式爆炸零门设计及试验

为了增强爆炸零门在应用中的稳定性,降低对沟槽装药装填工艺的要求,以间隙零门为研究对象,提出了以导爆索代替部分沟槽装药结构的方法。对具有不同尺寸参数的导爆索、沟槽装药以及零门间隙进行组合试验,以期通过试验得到装填工艺简单且控制通道对信号通道作用稳定的装填物质组合。研究结果表明,通过对由导爆索构成的爆炸零门进行合理的参数配置,能够实现在提升零门装置稳定性的同时又保证其可靠性。     

双酚A环氧树脂改性二氧化双环戊二烯体系固化动力学分析及其性能研究

二氧化双环戊二烯(CDR -0122)环氧树脂固化物的耐热性较好,但脆性大.采用不同质量分数的环氧(E -51)改性CDR -0122.对不同的改性体系进行DSC分析,确定其活化能、反应级数和最佳固化工艺.对改性的CDR - 0122环氧树脂固化物进行力学性能和耐温性能测试.结果表明:当加入E-51的质量分数为30％时,CDR -0122的树脂体系的综合性能最优.相比改性前,改性后的树脂体系活化能略有下降,并且其拉伸强度和弯曲强度分别提高了52.38％和54.77％,但玻璃化转变温度略有下降.