一类参数激励与强迫激励并存的非线性振动系统的分叉

本文用Ｌｉａｐｕｎｏｖ—Ｓｃｈｍｉｄｔ方法研究了同时受参数激励与强迫激励作用的非线性振动系统的亚谐分叉问题,用奇异性理论确定了等价意义下的分叉方程的形式,导出了必需的分叉系数,求出并且分析了１／２—１／２亚谐共振分叉方程的普适开折,画出了各个结构稳定域及分叉集上的响应图。     

SiCf/Si-O-C复合材料的抗氧化、抗热震性能研究

通过研究材料的氧化前后质量的改变和强度减少及氧化前后微观结构的变化,研究了先驱体转化法制备的SiCf/Si-O-C复合材料的抗氧化、抗热震性能。结果表明SiCf/Si-O-C复合材料具有良好的抗氧化、抗热震性能。对所得材料微观结构进行了分析讨论,发现界面结构的变化是影响SiCf/Si-O-C复合材料抗氧化、抗热震性能的主要原因。     

Technical note: Worst‐case performance of power‐of‐two policies for serial inventory systems with incremental quantity discounts

This study presents power‐of‐two policies for a serial inventory system with constant demand rate and incremental quantity discounts at the most upstream stage. It is shown that an optimal solution is nested and follows a zero‐inventory ordering policy. To prove the effectiveness of power‐of‐two policies, a lower bound on the optimal cost is obtained. A policy that has a cost within 6% of the lower bound is developed for a fixed base planning period. For a variable base planning period, a 98% effective policy is provided. An extension is included for a system with price dependent holding costs. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

舰载火控系统的建模与仿真

探讨了建模与仿真技术在新型武器系统研制中的作用地位;介绍了WISE一体化建模／仿真开发环境及仿真软件,描述了新型舰载火控系统的建模与数字仿真方法,给出了采用分布交互式仿真(DIS)技术支持新型舰载火控系统进行效能评估的技术途径     

用CORBA技术构建分布对象应用系统

首先讨论了网络计算面临的问题和分布对象计算技术,然后详细讨论了分布对象计算标准——公共对象请求代理结构（ＣＯＲＢＡ）规范的体系和各个部分．最后,对基于ＣＯＲＢＡ的分布对象计算的优点及前景作了讨论．     

介子跃迁形状因子的重夸克极限和1/m_Q修正

在BS理论框架下,对0~-→0~-和0~-→1~-(0~-和1~-分别代表赝标介子和矢量介子)跃迁的形状因子进行模型无关的分析.结果表明BS框架既能给出重夸克极限下的自旋—味对称性,又能给出重夸克有效理论关于1/m_Q修正的Luke定理及其它关系.     

KD-RTI/DDM中的组播分配策略

组播技术的应用可以有效提高RTI的实现性能。介绍了组播分配的一般理论和实现方案,详细展示了KD RTI中的组播分配策略,讨论了组播应用过程中出现的问题,同时给出了解决方法。     

基于HLA的地空导弹拦截仿真系统的开发

高层体系结构HLA建立一个通用的仿真框架,以解决不同仿真器、模型之间的互操作及仿真组件的可重用性问题.针对当前空防对抗的主要特点,在地空导弹拦截的数学模型的基础上,利用HLA技术框架,详细地叙述了地空导弹拦截仿真系统的开发过程.仿真试验表明该系统能有效评估地空导弹火力单元对来袭目标的有效抗击效率和火力范围,为地空导弹火力单元的部署和作战效能的改进提供辅助决策手段.     

Probabilistic analysis of an asymptotically optimal solution for the completion time variance problem

Scheduling a set of n jobs on a single machine so as to minimize the completion time variance is a well‐known NP‐hard problem. In this paper, we propose a sequence, which can be constructed in O(n log n) time, as a solution for the problem. Our primary concern is to establish the asymptotical optimality of the sequence within the framework of probabilistic analysis. Our main result is that, when the processing times are randomly and independently drawn from the same uniform distribution, the sequence is asymptotically optimal in the sense that its relative error converges to zero in probability as n increases. Other theoretical results are also derived, including: (i) When the processing times follow a symmetric structure, the problem has 2^{⌊(n−1)/2⌋} optimal sequences, which include our proposed sequence and other heuristic sequences suggested in the literature; and (ii) when these 2^{⌊(n−1)/2⌋} sequences are used as approximate solutions for a general problem, our proposed sequence yields the best approximation (in an average sense) while another sequence, which is commonly believed to be a good approximation in the literature, is interestingly the worst. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 373–398, 1999     

聚钛碳硅烷的新合成法及其研究

从聚硅烷(PS)与钛酸丁酯。(Ti(OBu)_4)出发,不采用任何反应促进剂直接合成了含钛碳化硅纤维的先驱体聚钛碳硅烷(PTC)。在这一反应中,PS 首先裂解成含Si—C 骨架与Si—H 键的低分子聚硅烷(LPS)。然后,由LPS 中的Si—H 键与Ti(OBu)_4的反应以及LPS 的Si—Si 骨架裂解转化为Si—C 骨架的反应制得了PTC.本文对这种新合成法所涉及的反应过程进行了研究,并比较了新旧两法得到的PTC—1与PTC—Ⅱ的结构异同,报告了以新法制得的PTC—Ⅱ为先驱体得到的含钛碳化硅纤维的优良性能。