级联SINS/GPS系统的相关卡尔曼滤波

针对级联式 SINS/ GPS导航系统中组合滤波器的测量噪声与系统噪声的相关问题 ,提出了一种相关程度未知条件下的估计量最优融合算法 ,并由此得到了一个顾及噪声相关性的卡尔曼滤波新算法。通过对一套 SINS/ GPS数据的计算 ,证明了新算法是成功的     

抗红外/毫米波双模制导的烟幕剂研究

针对目前我军受到的红外 毫米波复合制导武器威胁及现有干扰措施的局限,提出将纳米复合材料G用做宽波段烟幕干扰剂,该材料具有较高电导率、磁导率,比重小,在空气中较为稳定。简述干扰材料G的制备方法,分析其材料特性,初步测试其对红外热成像仪和毫米波雷达的衰减效果。     

指挥所目标识别专家系统的实现

在分析国内外敌我识别技术的现状及发展趋势的基础上,针对我军的具体实际,利用专家系统技术,提出了基于多情报源信息融合技术的目标识别方法,并给出了基于客户/服务器模式的系统实现结构图。     

面向基本对象模型BOM和Web服务的建模技术研究

介绍了BOM模型和面向Web服务技术,从概念、表示以及语义层次上对2种技术进行了对比分析。基于二者数据类型和语义的一致性,提出了从BOM模型到Web服务描述的映射规则,阐述了这种映射的实际操作步骤,最后通过实例验证了该方法的可行性和有效性,并分析和总结了运用BOM和Web服务建模的优越性。     

基于单片机的DC—DC升压电路设计与仿真

介绍了Boost电路升压原理,给出了Boost电路完整的设计方案,重点讨论了硬件电路的设计,对软件所要实现的功能进行了设定,并设计了软件的流程图。最后用Matlab／Simulink软件,对电路进行了仿真实验,实验结果证明,该电路简洁有效,设计结果达到了预定的要求。     

基于EGK/EGD的VxWorks图形界面开发技术

为了解决嵌入式系统下图形界面开发困难的问题,讨论了在VxWorks下利用EGK/EGD进行窗口图形界面开发的方法.分析了其工作原理及开发流程,并给出了具体的应用实例.工程应用表明,EGK/EGD功能强大、使用方便,是一套理想的嵌入式人机界面解决方案.     

信息化条件装备战场维修资源保障问题研究

战场维修资源是实施战场抢修最重要的物质条件,借鉴美军装备"精确保障"理念思想,对信息化条件下装备战场维修资源保障问题进行了研究.通过分析信息、资源、效能三者关联关系和维修资源保障指挥管理过程,确定装备保障指挥管理系统功能模型.最后对支持战场维修资源保障系统的关键技术和相应建设对策展开探讨.     

舰艇编队防空仿真系统的设计与实现

HLA的主要目的是解决各种类型仿真应用之间的互操作以及仿真及其构件的重用问题,提高了仿真开发的效率,可以作为作战仿真实验室的技术基础.基于HLA进行了舰艇编队防空仿真联邦的设计与实现,首先,对舰艇编队防空仿真联邦及其开发的一般过程进行了描述;然后,对各邦员进行了具体的设计与实现,并对各邦员、各对象间的公布/订购关系进行了描述.仿真结果分析显示,仿真系统设计合理,仿真逻辑正确,可应用于武器系统的作战效能评估.     

Locational tying of complementary retail items

We study a selling practice that we refer to as locational tying (LT), which seems to be gaining wide popularity among retailers. Under this strategy, a retailer “locationally ties” two complementary items that we denote by “primary” and “secondary.” The retailer sells the primary item in an appropriate “department” of his or her store. To stimulate demand, the secondary item is offered in the primary item's department, where it is displayed in very close proximity to the primary item. We consider two variations of LT: In the multilocation tying strategy (LT‐M), the secondary item is offered in its appropriate department in addition to the primary item's department, whereas in the single‐location tying strategy (LT‐S), it is offered only in the primary item's location. We compare these LT strategies to the traditional independent components (IC) strategy, in which the two items are sold independently (each in its own department), but the pricing/inventory decisions can be centralized (IC‐C) or decentralized (IC‐D). Assuming ample inventory, we compare and provide a ranking of the optimal prices of the four strategies. The main insight from this comparison is that relative to IC‐D, LT decreases the price of the primary item and adjusts the price of the secondary item up or down depending on its popularity in the primary item's department. We also perform a comparative statics analysis on the effect of demand and cost parameters on the optimal prices of various strategies, and identify the conditions that favor one strategy over others in terms of profitability. Then we study inventory decisions in LT under exogenous pricing by developing a model that accounts for the effect of the primary item's stock‐outs on the secondary item's demand. We find that, relative to IC‐D, LT increases the inventory level of the primary item. We also link the profitability of different strategies to the trade‐off between the increase in demand volume of the secondary item as a result of LT and the potential increase in inventory costs due to decentralizing the inventory of the secondary item. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

196单片机在火控计算机中的应用

火控输出机是介于雷达和火炮之间的重要环节,在系统规定周期内,通过共享存贮器接收主机送来的位置和速度以及加速度数字量.完成数据插值、粗精分离.输出机在插值输出时与主机同步,并设计两种复位信号标志,手动复位和加电复位,使软件根据复位标志判断是否使火炮归零.火控输出机在火控系统中担当重要角色,它可根据火控主机解算后传输来的数据准确将火炮定位.