基于强跟踪扩展Kalman滤波的X射线脉冲星导航定轨精度研究

为提高X射线脉冲星导航定轨精度,依据脉冲星导航原理,建立了X射线脉冲星自主导航系统的状态方程和观测方程,提出用强跟踪扩展Kalman滤波（Strong Tracking Extended Kalman Filter,STEKF）替代扩展Kalman滤波,并对3颗脉冲星卫星运行的位置和速度估计进行了仿真实验。仿真结果表明：STEKF具有使滤波器能够自适应地校正估计偏差并迅速跟踪状态变化的能力,有效地提高了卫星运动状态的估计精度和数值稳定性。     

基于不同模式的反导作战管理与敏感性分析

针对反导作战指控系统作战管理任务与过程,分别构建了层次式、中心式和分布式3种作战管理模式。基于3种管理模式,采用以仿真系统搭建作战环境进行对抗的仿真评估方法,以拦截比率（发射数/拦截数）为评估参数对不同作战管理模式的效能进行了仿真评估,同时对影响评估效能的参数进行了敏感性分析。根据分析评估结果,明确了在不同作战样式下采用不同作战管理模式的基本原则。     

重型装备空投系统的匹配设计与评估方法

为解决重型武器装备空投系统的匹配设计问题,采用非线性有限元方法,结合气体热力学理论,建立重型装备空投系统的仿真模型,结合装备的试验数据进行了模型的验证,在分析重装空投落地缓冲过程的响应特性的基础上,研究了空投系统的匹配设计与评估方法,并以高海拔条件下空投过程中缓冲气囊的缓冲特性为例进行了分析,研究结果对空投系统的优化设计、匹配与评估具有一定的参考价值。     

基于HLA的单兵系统编配效能仿真

建立了基于HLA的数字化步兵作战仿真系统,介绍了该仿真系统的组成及其模型体系,并在此仿真系统上按照不同编配方案进行单兵系统的作战仿真.同时建立了单兵系统的效能评价指标体系,通过层次分析法确定各级指标权重,结合灰靶理论对仿真结果进行评价分析,从而确定编配方案的优劣.     

基于物元模型-AHP的联合电子防空作战效能评估

针对现代防空作战训练中联合电子防空作战效能评估的问题,引入物元模型,并结合层次分析法(AHP)提出了基于物元模型-AHP的联合电子防空作战效能评估方法.以某次复杂电磁环境下联合电子防空演习任务为背景,建立了作战效能评估指标体系和评估模型,给出了评估模型的仿真算例,结果表明,该方法在联合电子防空作战的效能评估中是可行和有...     

探空火箭级间段的CAD系统

本文在CADKEY绘图软件包的支持下,开发了加筋圆柱结构CAD系统—Hcadx.此系统通过菜单引导用户的操作,可用经验公式或解析法作轴压稳定分析,用罚函数法优化参数,可以在不退出Hcadx的情况下启动CADKEY,自动绘制设计草图。此草图经过适当地编辑、修改、便可成为工程中能接受的工作图纸。     

Buckling analysis of embedded graphene oxide powder-reinforced nanocomposite shells

In this study, the buckling analysis of a Graphene oxide powder reinforced (GOPR) nanocomposite shell is investigated. The effective material properties of the nanocomposite are estimated through Halpin-Tsai micromechanical scheme. Three distribution types of GOPs are considered, namely uniform, X and O. Also, a first-order shear deformation shell theory is incorporated with the principle of virtual work to derive the governing differential equations of the problem. The governing equations are solved via Galerkin's method, which is a powerful analytical method for static and dynamic problems. Comparison study is performed to verify the present formulation with those of previous data. New results for the buckling load of GOPR nanocomposite shells are presented regarding for different values of circumfer-ential wave number. Besides, the influences of weight fraction of nanofillers, length and radius to thickness ratios and elastic foundation on the critical buckling loads of GOP-reinforced nanocomposite shells are explored.     

Improvement of VIS and IR camouflage properties by impregnating cotton fabric with PVB/IF-WS2

In order to examine the possibility to improve its camouflage properties standard cotton fabric with camouflage print was impregnated with poly(vinyl butyral), PVB and fullerene-like nanoparticles of tungsten disulfide, PVB/IF-WS₂. FTIR analysis excluded any possible chemical interaction of IF-WS₂ with PVB and the fabric. The camouflage behavior of the impregnated fabric has been examined firstly in the VIS part of the spectrum. Diffuse reflection, specular gloss and color coordinates were measured for three different shades (black, brown and dark green). Thermal imaging was applied to examine the camouflage abilities of this impregnation in IR part of the spectrum. The obtained results show that PVB/IF-WS₂ impregnation system induced enhacement of the materials camouflage properties, i.e. that IF-WS₂ have a positive effect on spectrophotometric characteristics of the fabric.     

热真空条件下工作的电气电缆载流量计算与试验

高空制导飞行器从母舱释放后,制导舱与仪器舱之间部分电气电缆处于热真空条件下工作。对此种特定条件下的电缆进行了载流量计算。理论计算表明,给定的电缆设计满足在热真空条件下正常工作要求。最后简略介绍了载流量试验。     

导弹大攻角高机动飞行特性分析与仿真

以新一代无翼式气动布局导弹为背景,在大攻角气动特性理论基础上,分析了在导弹主动段、攻角在180°范围内变化的导弹飞行特性,得出了90°内大攻角最大转弯能力和180°攻角附近最大降速效果的结论。进行了俯仰平面S型轨迹机动飞行仿真,仿真结果说明了大攻角飞行的高机动特性。