Ablation characteristics of insulator under high-temperature gas dual-pulse erosion

This study numerically simulated and investigated the flow field characteristics of a typical dual-pulse solid rocket motor with a soft pulse separation device through thermal insulation ablation under high-temperature dual-pulse erosion. The ablation rate of ethylene -propylene-diene monomer (EPDM) insulator was measured after the experiment. Experimental results were analyzed through scanning electron microscopy and microcomputed tomography. The ablation mechanism of the EPDM insulator under the operation conditions of a dual-pulse solid rocket motor was evaluated by analyzing the results. The results reveal that the internal flow field of the motor with a soft pulse separation device is uniform. The original charred layer existing on the EPDM insulator surface in the first pulse combustor is the decisive factor affecting the final ablation rate of the dual-pulse motor during the second pulse operation, and the ablation characteristic region is easily formed with the exfoliation of the charred layer. The ablation rate difference of the insulator increases with gas velocity.     

基于HLA的弹道导弹突防仿真系统开发研究

随着反导防御系统的发展,弹道导弹突防将受到更大的威胁。HLA以其可重用性、互操作性好的特点,逐渐成为仿真的主流体系结构。介绍了HLA的系统组成和联邦开发的过程,提出了一个基于HLA的弹道导弹突防仿真系统仿真框架,为后续的仿真系统开发奠定了必要的基础。     

基于HLA/RTI 的仿真系统设计

结合雷达电子对抗仿真实例，论述了基于ＨＬＡ／ＲＴＩ的分布交互式多机仿真系统的体系结构、底层通信网络、运行支持系统、仿真应用对象模型和仿真运行管理及其设计与实现问题。     

管道中高次波的有源控制

探讨管道中高次波的有源控制问题.首先,对消声条件下的次级声源强度进行了理论分析,并对误差传声器的数目与位置进行了讨论.最后,进行了控制方截面管中(0,0)次波(平面波)和(1,0)次波的实验.结果表明,对管道中的高次波实施有源控制是完全可能的.     

程控大功率直流稳压电源的研制

程控大功率直流稳压电源是某型鱼雷自动检测系统的分系统,是为实现鱼雷全自动化供电和测试的一种先进设备。该系统采用了ＭＣＳ－５１单片机实施系统控制与管理、电压连续调整、通讯程控等功能,因而精度高、自动化功能强、使用方便。     

柴油机检测与诊断系统的研制

本文以作者参加研制的柴油机检测与诊断系统为对象,在分析柴油机故障机理及特点的基础上,详细论述了检测与诊断系统的组织与结构,检测参数的选择与取舍,信号数据的采集与处理和系统故障诊断等方面的问题。文章着重论述了转速的测量及其在柴油机检测与诊断系统中的应用,柴油机高压油路的检测与诊断,ＤＳＰ系统软件的开发及其在柴油机表面振动诊断中的应用。     

液体炸药的特性及其探测技术

近年来,恐怖分子热衷于使用液体炸弹实施袭击,利用其制造简易、携带隐蔽、识别困难、现场配用等特点,逃避安全检查。液体炸药的有效识别和探测,成为各国安全部门亟待解决的问题。     

The Early Responses of Air-backed plate subjected to underwater explosion with aluminized explosives

This work aims to research the effects on the early responses of the air-backed plate subjected to the loading generated by the underwater explosion with aluminized explosives. The loading characteristics of underwater explosion for ideal explosive (TNT), aluminized explosives (RS211 and RBUL) are obtained experimentally. The tested aluminized explosives have different energy output compared with TNT. Based on the Taylor plate theory, the early responses of the air-backed steel plate affected by the measured loading is analyzed. The analytical results indicate that the pressure curve of the shock wave within 1 time decay constant is the main factor affecting the kick-off velocity of the plate when cavitation occurring. The velocity responses of the plate produced by the loading of RS211 and RBUL are obviously different with that of an equivalent TNT charge, which also indicates validity and suitability should be noticed in the case of substituting TNT for aluminized explosives. Moreover, the uncertainties in the responses of the plate produced by RS211 and RBUL are much larger than TNT.     

Influence of high overload on the collimating lenses of laser ranging systems

Collimating lenses are an important component of laser ranging systems, and high overload environments severely affect the beam shaping effect of such lenses. This study proposes a buffer isolation method on the basis of impact stress wave attenuation theory for collimating lens spacers. ANSYS finite element software was applied to simulate the high load dynamics of collimating lenses, and the buffer isolation performance of different materials and composite structures was compared and analysed. Optical simulation analysis of the collimating lenses under different buffer conditions was performed using ZEMAX software to study the mechanism by which a high overload affects the collimating lenses. High overload and optical shaping experiments based on theoretical analysis were further conducted. Results showed the superiority of butadiene rubber to polytetrafluoroethylene after application of 70000 g impact acceleration. The combination-gasket method was superior to the single-gasket method, and the sandwich combination-gasket method was superior to the double-layer combination-gasket method.     

高规在执行中面临的新问题及对策

分析目前《高层民用建筑设计防火规范》在执行中面临的新问题 ,并结合工程实例 ,对《高层民用建筑设计防火规范》中相关条款提出看法。