烧结助剂对热压SiCw/Si3N4复合材料性能的影响

本文通过热压的方法分别制得以Ｙ２Ｏ３－Ａｌ２Ｏ３和Ｙ２Ｏ３－Ｌａ２Ｏ３为烧结助剂的ＳｉＣｗ／Ｓｉ３Ｎ４陶瓷基复合材料，对比了采用不同种类及含量的烧结助剂的ＳｉＣｗ／Ｓｉ３Ｎ４复合材料的性能结果，发现烧结助剂的种类及含量对ＳｉＣｗ／Ｓｉ３Ｎ４复合材料的弯曲强度和断裂韧性有明显的影响，对高温弯曲强度的影响尤为显著。     

用B4C陶瓷先驱体涂复碳纤维研究

用溴苯和BF3乙醚为起始原料,合成出聚对亚苯基硼(PPB),高温裂解后得到含B4C 54.4%、B2O2 13.6%、自由碳32%的陶瓷.用溶液浸涂碳纤维(CF)并高温裂解后得到B4C涂层CF,与未涂层CF相比,B4C涂层CF抗热氧化性提高200°C.1800°C热压时B4C涂层CF较未涂层CF制得的CF/SiC复合材料的σb值提高10.5% ,KIC值提高19.4%,1850°C热压时相应的σb值提高31.6%,KIC提高5.8%.     

烧结温度对 Cf/SiC 复合材料界面的影响

系统地研究了烧结温度对Cf/SiC复合材料界面和力学性能的影响.结果表明,烧结温度较低(1700℃)时,由于复合材料的烧结性差,纤维与基体间仅仅为一种机械结合,因此纤维与基体间结合很弱,从而导致复合材料力学性能低.烧结温度提高至1800℃后,由于适量的富碳界面相不仅可避免纤维与基体间的直接结合,而且使纤维与基体间的结合强度适中,因而复合材料具有很好的力学性能.进一步提高烧结温度至1850℃或更高温度时,由于界面相与纤维间的反应加重,纤维本身性能大大降低.同时,纤维与基体间结合强度提高,因此复合材料的力学性能大大降低.     

Cf/SiC复合材料抗氧化涂层的制备及性能

在氧化性环境中,高于400℃时碳纤维开始氧化,限制了Cf SiC复合材料的应用。通过在Cf SiC复合材料表面制备抗氧化涂层体系,可以有效地保护碳纤维不被氧化。本实验制备了含CVD SiC粘接层、自愈合功能层和CVD SiC抗冲蚀层的三层涂层体系,并进行了氧化失重试验。氧化失重试验结果表明,仅有CVD SiC涂层的试样氧化失重率较大,不能有效地保护材料,而含有自愈合功能层的三层涂层体系的材料试样,在800℃～1200℃的氧化失重率非常小,1000℃下氧化288h的失重率仅为2.3%,弯曲强度仍保持为452.9MPa。同时实验发现,试样在氧化失重试验后,其CVD SiC涂层的表面形貌有明显改变,这主要是由SiC氧化形成SiO2薄膜所致,并且在1200℃下所生成的SiO2薄膜有表面收缩趋势,具有液相膜的部分特征。     

舰船尾部振动分析整船混合有限元模型的集成方法研究

对舰船尾部振动分析中整船混合有限元模型的集成方法进行了研究．通过对现有的几种集成方法进行分析、比较,提出了一个较为简便、易于操作的集成方法,并用于对某型舰尾部振动的实例分析中,得出了满意的结果．本文结论可推广到采用整船混合有限元离散模型对舰船总体振动和局部振动的分析计算中．     

弹炮混编防空群机动部署方案优选与评估

高技术条件下的反空袭作战中,弹炮混编防空群机动部署是相对传统防空作战中固定部署方式的一种新的部署方式,结合数学模型来确定机动部署的原则及部署方案的优化与评估。     

An efficient SPH methodology for modelling mechanical characteristics of particulate composites

Particulate composites are one of the widely used materials in producing numerous state-of-the-art components in biomedical, automobile, aerospace including defence technology. Variety of modelling techniques have been adopted in the past to model mechanical behaviour of particulate composites. Due to their favourable properties, particle-based methods provide a convenient platform to model failure or fracture of these composites. Smooth particle hydrodynamics (SPH) is one of such methods which demonstrate excellent potential for modelling failure or fracture of particulate composites in a Lagrangian setting. One of the major challenges in using SPH method for modelling composite materials depends on accurate and efficient way to treat interface and boundary conditions. In this paper, a master-slave method based multi-freedom constraints is proposed to impose essential boundary conditions and interfacial displacement constraints in modelling mechanical behaviour of composite materials using SPH method. The proposed methodology enforces the above constraints more accurately and requires only smaller condition number for system stiffness matrix than the procedures based on typical penalty function approach. A minimum cut-off value-based error criteria is employed to improve the compu-tational efficiency of the proposed methodology. In addition, the proposed method is further enhanced by adopting a modified numerical interpolation scheme along the boundary to increase the accuracy and computational efficiency. The numerical examples demonstrate that the proposed master-slave approach yields better accuracy in enforcing displacement constraints and requires approximately the same computational time as that of penalty method.     

A comprehensive review on material selection for polymer matrix composites subjected to impact load

Polymer matrix composites (PMC) are extensively been used in many engineering applications. Various natural fibers have emerged as potential replacements to synthetic fibers as reinforcing materials composites owing to their fairly better mechanical properties, low cost, environment friendliness and biodegradability. Selection of appropriate constituents of composites for a particular application is a tedious task for a designer/engineer. Impact loading has emerged as the serious threat for the composites used in structural or secondary structural application and demands the usage of appropriate fiber and matrix combination to enhance the energy absorption and mitigate the failure. The objective of the present review is to explore the composite with various fiber and matrix combination used for impact applications, identify the gap in the literature and suggest the potential naturally available fiber and matrix combination of composites for future work in the field of impact loading. The novelty of the present study lies in exploring the combination of naturally available fiber and matrix combination which can help in better energy absorption and mitigate the failure when subjected to impact loading. In addition, the application of multi attributes decision making (MADM) tools is demonstrated for selection of fiber and matrix materials which can serve as a benchmark study for the researchers in future.     

用能量法确定层状复合材料疲劳裂纹的扩展方向

含裂纹体疲劳寿命的预测,必须首先了解裂纹扩展路径的全过程,而在层状复合材料中,裂纹扩展的路径非常复杂,不仅可以拐弯,而且可以分叉.因此,首先提出一个简单、适用、统一的裂纹扩展方向的相对强度准则,即应变能释放率比值判据;然后,利用有效解决高梯度问题的数值方法--任意线法,对实测试件的关键时刻(例如,拐弯或进入界面),进行了数值分析;并对典型试件进行了疲劳断裂实验研究.3方面的结果,得到相互的验证.这种一致性,不仅初步证明了这一方法的正确性和适用性,而且为疲劳裂纹扩展全过程的解决,提供了必要的基础.     

C/SiC复合材料残余应力的电火花小孔法测定研究

进行了C/SiC复合材料残余应力的小孔法表征.基于现有小孔法的不足以及材料的较好电导率,提出了电火花打孔法的残余应力测量方法,建立了相应的残余应力测量流程.进行了不同平整表面样品的残余应力测量.结果表明电火花打孔法具有较好的区分性,也表明C/SiC复合材料具有较小的本征残余应力和机加工应力,这说明:C/SiC复合材料作为反射镜材料具有很好的面形稳定性的优势.