电磁发射装置电-磁-热场分布的分析与仿真

为探讨电磁发射过程中出现的热烧蚀现象,构建了电磁发射及电接触层接触电阻的模型,推导出电-磁-热场耦合方程,采用有限元数值计算方法得到了在脉冲电流激励下,轨道和电枢间电流密度、磁感应强度及温度的分布图。计算过程表明:电磁发射过程实际是电-磁-热场的耦合过程,接触电阻是造成电磁发射热损耗的主要原因之一,接触电阻使得轨道和电枢接触表面区域的电流密度极大,容易造成轨道材料的烧蚀。     

Is South Africa's 20 years of democracy in crisis? Examining the impact of unrest incidents in local protests in the post-apartheid South Africa

This article assesses South Africa's 20 years of democracy, which has frequently been bedevilled by local protests. This article is particularly interested in those unrest incidents that have been distinct for one reason or another. In South Africa, the surge in local unrest incidents is often linked to police behaviour, which has become increasingly militant and brutal when quelling protests. While the right to protest is constitutional, the damage caused during protest action can be immense owing to acts of violence. Protestors' resorting to violent protest action is often linked to increased frustrations as a result of the government's inability to live up to the expectations of marginalised and poor communities. While this article draws primarily on existing scholarly debates focusing on social protests, the primary objective is to examine the impact of unrest incidents on local protests in post-apartheid South Africa. The article further argues that ‘spaces’ for participation in local governance should be created so that citizens can become architects of development and their own future.     

化学键合胶凝材料抗硫酸盐侵蚀性能

采用浸-烘循环的方法模拟干湿循环交替环境进行新型化学键合胶凝材料抗硫酸盐加速侵蚀试验.侵蚀溶液为质量浓度为5％的硫酸钠溶液,一组试验采用全浸-烘循环,另一组试验采用半浸-烘循环.在经受30×N(N=1,2,3,4,5)次循环后,测定试件的强度耐蚀系数和质量损失率,以此评价化学键合胶凝材料抗硫酸盐侵蚀性能.试验结果表明:半浸-烘循环的侵蚀比全浸-烘循环的侵蚀严重;在经受150次侵蚀循环后,试件外观无严重破损,质量不减反增,强度也不降低,说明化学键合胶凝材料具有优良的抗硫酸盐侵蚀性能.     

军用装备镁合金表面微弧氧化层SEM微观形貌及耐蚀性分析

利用微弧氧化技术的恒电流方式,在含有Na：SiO,和KF等电解质的溶液中制备了AZ91D镁合金微弧氧化层,通过扫描电镜观察分析及Cu加速盐雾腐蚀试验,研究了电解液中Na：SiO,和KF质量浓度对微弧氧化层结构及耐蚀性的影响。结果表明：在相同反应条件下,微弧氧化层厚度和表面粗糙度随Na：SiO,和KF质量浓度的增加而增加,微弧氧化层的耐蚀性取决于其表面粗糙度和厚度,粗糙度小、具有一定厚度的致密微弧氧化层耐蚀性好。     

3维C/SiC-ZrC复合材料的制备及其性能研究

针对超高温环境应用需求,采用化学气相渗透工艺(CVI)与先驱体浸渍-裂解工艺(PIP)联用制备了3维碳纤维增强SiC-ZrC基复合材料(C/SiC-zrC),并研究了SiC含量对C/SiC-ZrC复合材料力学性能、抗氧化性能和抗烧蚀性能的影响.结果表明,随着SiC含量的增加,C/SiC-ZrC复合材料的强度逐渐降低,静...