隐身飞机RCS测量与成像方法研究综述

隐身飞机已逐步成为大国重器,并将持续发挥重要影响,隐身技术也已成为飞行器设计的关键技术。隐身飞机的雷达散射截面积(radar cross section, RCS)测量是设计、制造、维护隐身飞机的必要手段。从缩比模型的RCS测试、全尺寸飞机室外RCS测试、全尺寸飞机室内近场测试三个方面,回顾了隐身飞机RCS测量的基本流程,总结了隐身飞机RCS近场测量的理论基础,并着重对具有成像诊断功能的近场RCS测量技术进行了梳理与分析。对隐身飞机RCS测量的应用趋势和关键技术进行了总结与展望, 有利于对隐身飞机RCS测量形成总体性了解,并把握RCS测量的发展方向。     

Modeling of the whole process of shock wave overpressure of free-field air explosion

The waveform of the explosion shock wave under free-field air explosion is an extremely complex problem. It is generally considered that the waveform consists of overpressure peak, positive pressure zone and negative pressure zone. Most of current practice usually considers only the positive pressure. Many empirical relations are available to predict overpressure peak, the positive pressure action time and pressure decay law. However, there are few models that can predict the whole waveform. The whole process of explosion shock wave overpressure, which was expressed as the product of the three factor functions of peak, attenuation and oscillation, was proposed in the present work. According to the principle of explosion similarity, the scaled parameters were introduced and the empirical formula was absorbed to form a mathematical model of shock wave overpressure. Parametric numerical simulations of free-field air explosions were conducted. By experimental verification of the AUTODYN numerical method and comparing the analytical and simulated curves, the model is proved to be accurate to calculate the shock wave overpressure under free-field air explosion. In addition, through the model the shock wave overpressure at different time and distance can be displayed in three dimensions. The model makes the time needed for theoretical calculation much less than that for numerical simulation.     

Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive, an explosion device was developed and used to investigate the detonation pressure and temperature of R1 (Al6) aluminum powder and the aluminum powder particle gradation of R2 (Al6+Al13), R3 (Al6+Al24) and R4 (Al6+Al flake) in a confined space. By using gas chromatography, quantitative analysis and calculations were carried out to analyze the gaseous detonation products. Finally, the reaction ratios of the aluminum powder and the explosion reaction equations were calculated. The results show that in a confined space, the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum. In vacuum, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2, respectively. In air, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3, respectively. R4 (Al6+Al flake) and R3 (Al6+Al24) have relatively higher temperatures after detonation, which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by 10.6% and 8.0%, respectively. In air, the reaction ratio of Al6 aluminum powder can reach as high as 78.16%, and the reaction ratio is slightly reduced after particle gradation. Finally, the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products, which provides a powerful basis for the study of RDX-based explosive reactions.     

温度对舰船阴极保护和腐蚀静电场的影响

海水中氧溶解量和海水电导率是影响海水腐蚀性能的重要因素,而这两个因素主要取决于海水的盐度和温度。采用边界元法建立舰船外加电流阴极保护和腐蚀静电场模型,研究不同海水温度下氧溶解量、电导率及氧的扩散系数对舰船腐蚀防腐静电场的影响。结果表明,腐蚀电场峰值随着温度的升高而减小,当两对阳极输出电流分别为13.5 A和8 A时,船体和舵在低温处于过保护状态而在高温处于欠保护状态,螺旋桨和轴在不同温度下均能得到较好的保护。     

采用遗传算法的电控增压器电磁阀优化设计

运用Ansoft Maxwell软件建立电磁阀的动态响应特性仿真模型,并通过试验验证模型的准确性。利用模型集成ISIGHT软件的方法,对影响电磁阀动态响应特性的参数进行灵敏度分析,得出各个参数对动态响应特性的Pareto图。基于遗传算法对电磁阀进行多参数优化设计,获取最佳参数组合,并利用电磁阀动态响应特性试验台架,开展参数优化前后电磁阀动态响应特性的对比试验研究。试验结果表明：相比于原参数方案,参数优化后的电磁阀动态响应特性得到大幅度提升,其开启响应时间缩短了59.1%,关闭响应时间缩短了47.2%。     

天海一体化水下重力辅助导航研究进展

水下航行器精确导航在海洋利用和开发过程中发挥了重要作用。关于抑制水下导航误差随时间累积的问题,进行了详细阐述和分析:简述了惯性器件的发展历程;详细对比了各导航系统的优劣性,着重介绍了国内外重力辅助导航研究现状,分析了针对目前水下航行器高精度导航的需求,以及全球海洋重力基准图空间分辨率不足的科学难题;提出了通过GNSS-R测高星座获得高空间分辨率和高精度全球海洋重力基准图的思路及技术路线,以期提高水下重力辅助导航精度。     

CODE新光压模型对北斗混合导航星座精密轨道确定的影响

运用卫星定轨软件工具包NUDTTK,分析了欧洲定轨中心扩展的经验光压模型(EECOM)对北斗二代混合导航星座精密轨道确定的影响。研究表明:对地球静止轨道卫星而言,EECOM能够明显改善定轨精度,相比于传统的ECOM-9和ECOM-5模型,卫星激光测距检核精度分别提高17.4%和35.1%。对倾斜地球同步轨道卫星和中轨道卫星而言,采用ECOM-5模型的定轨精度要优于采用EECOM和ECOM-9模型的,新光压模型EECOM并不能有效改善倾斜地球同步轨道卫星和中轨道卫星的定轨精度。与IGS数据分析中心WHU、GFZ和CODE的轨道产品相互比对的结果显示:目前,国防科技大学北斗精密轨道产品中,地球静止轨道卫星的定轨精度为1~4 m,倾斜地球同步轨道卫星的定轨精度为25~30 cm,中轨道卫星的定轨精度为10~20 cm。     

CODE新光压模型对北斗混合导航星座精密轨道确定的影响分析

基于国防科技大学自主研制的卫星定轨软件工具包NUDTTK,分析了CODE新光压模型EECOM对北斗二代混合导航星座精密轨道确定的影响。研究表明：对GEO卫星而言,EECOM模型能够明显改善定轨精度,相比于传统的ECOM-9和ECOM-5模型,卫星激光测距检核精度分别提高17.4%和35.1%。对IGSO和MEO卫星而言,采用ECOM-5模型的定轨精度要优于EECOM和ECOM-9模型,新光压模型EECOM并不能有效改善IGSO和MEO卫星的定轨精度。与IGS数据分析中心WHU、GFZ和CODE的轨道产品互比对结果（3D RMS）显示：目前,国防科技大学北斗精密轨道产品中,GEO卫星的定轨精度为1~4 m,IGSO卫星的定轨精度为25~30 cm,MEO卫星的定轨精度为10~20 cm。     

层流介质中金属板腐蚀电位分布研究

为了研究流动介质中产生的静电场,结合电化学和流体力学相关知识建立层流介质中金属板模型,利用贝塞尔函数展开及其逆运算推导出在三层介质中基于点电荷模型的腐蚀电位解析表达式,同时计算出金属板产生的电场。运用推导出的解析表达式计算出在流动介质中任意场点处金属板随不同流速产生的腐蚀电位,并通过实验验证结果的正确性。结果表明,对层流条件下电化学反应产生的电流密度所建模型的结果与实验测量数据吻合度较高,同时电场分布也会随着流体流速及层流方向上长度的变化而发生变化。     

电磁发射的出口速度及负载质量变化对导轨热量的影响

为分析不同发射出口速度、不同发射负载质量对导轨积累热量的影响,建立了导轨温度场模型,计算了导轨各点温度变化过程,并和光纤光栅温度传感器测量结果对比,验证了模型及测量结果的正确性。在此基础上,设计并进行了三种类型实验,分析了在不同发射速度、不同发射负载质量以及相同发射能级不同发射速度下的导轨热量积累差异。该结论为确定连发间隔、导轨冷却设计提供了有效参考。