基于AHP和模糊理论的导弹快艇C3I系统效能评估

针对某型导弹快艇的C3I系统作战效能评估的需要,采用AHP法确定C3I系统作战能力指标及相应各指标的权重,然后运用模糊综合评判对该导弹快艇的C3I系统能力进行综合评估,为舰艇作战指挥人员了解系统作战效能和系统研制人员改进系统提供定量依据。     

一种新型混合跳频通信技术

文中提出了一种新型混合跳频通信技术,该技术结合传统跳频技术和差分跳频技术,在较窄的频带上采用差分跳频调制,并将该调制信号与另一更宽频带内的慢跳频信号进行混频,最终得到一个跳速高、频带宽的调制信号。接收端解调时,先按照传统跳频解调的方式进行慢跳频的解调,再按照差分跳频解调的方式对信号进行差分跳频解调。这种混合跳频通信技术在提高数据传输速率的同时,也可以很好地改善系统的误码率性能和抗单音干扰性能。     

C4I系统抗毁生存能力分析及优化

抗毁生存能力是C4I系统的一个重要指标.分析影响C4I系统生存能力的因素,建立C4I抗毁能力模型,是研究提高C4I系统作战效能的重要问题.结合C4I系统的实际,分析和优化提高C4I系统抗毁生存能力的措施,具有很好的现实意义.     

镍对重力分离SHS陶瓷内衬复合管的影响

采用SHS重力分离技术制备陶瓷内衬复合管,通过改变主燃烧配系组元Ni的含量,研究分析了金属Ni对陶瓷内衬复合管制备的燃烧特性及机械性能的影响。研究发现,适量的Ni粉能促进SHS燃烧进行,提高燃烧体系的绝热燃烧温度和陶瓷层的致密度,并且有助于形成金属/陶瓷界面过渡层,这极大提高了复合管的显微硬度和抗压剪强度。当Ni粉含量为19wt％时,陶瓷层的显微硬度和抗压剪强度分别最高达1764N/mm2和36.1MPa。     

基于无线双工通信系统分组数据传输的探讨

分析了军用无线双工通信系统数据传输资源,指出了存在的问题及改进办法;利用话音、报文、传真、数据电路交换信令的工作模式标示,提出了基于无线双工通信系统的数据传输TCP/IP结构体系及协议栈,并探讨了网络适配和实现与军用公共数据网、地域通信网（电路交换网、分组交换网）、数字化部队单工无线电数据网互联的关键技术。     

防空导弹总体设计方法的新发展——弹族化设计

研究了防空导弹一种新的总体设计思想———弹族化设计 ,论述了防空导弹弹族的设计与研制采用预先计划的产品改进P3 I(Pre PlannedProductImprovement)系统方法的必要性与有效性 ,通过对一个覆盖全空域、包含有 3种导弹的防空导弹弹族进行一体化优化设计 ,其结果证明了弹族化设计方法的可行性和优越性     

小波神经网络在装备研制费预测与控制中的应用

通过小波及小波变换的原理和方法,建立了适用于武器装备研制费用的小波神经网络预测与控制模型.结合某型装备研制费用,进行了预测与控制的数据仿真.     

一种运用遗传算法确定船舶航向控制模糊规则的方法

为了克服船舶航向控制模糊规则确定过程中的盲目性,引入一种与之相适应的遗传算法,以使结果成为某种意义下的最优解,从而从根本上解决这一重要问题.文中运用Matlab的C语言MEX-文件技术,将遗传算法源代码与Matlab直接结合起来,利用后者的强大建模能力,建立起完整的仿真模型.仿真结果表明,船舶的航向控制能力得到明显改善.     

Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016     

0.18 μm CMOS工艺的GPS/BDS双模可重构接收机射频前端

采用低中频架构设计了一种0.18μm CMOS工艺的GPS/BDS双模可重构接收机射频前端,能在GPS L1模式或BDS B1模式下工作。通过频率自适应电路调整中频滤波器的时间常数,降低其频率不确定度;压控振荡器中加入4位开关电容阵列,以提高频率调谐范围和相位噪声性能;通过硬件复用的方式降低系统功耗。测试结果表明,在1.8 V电源电压下,功耗37.8 m W,电压增益为103 d B,GPS L1和BDS B1波段噪声系数均小于3.2 d B。