大型武器系统的技术成熟度评估方法

在介绍国外技术成熟度评估发展的基础上,给出了大型武器系统的技术成熟度评估方法;以导弹武器系统为例,说明了确定关键技术元素（CTE）的方法和步骤;最后通过对武器系统各单项关键技术元素的技术成熟度等级进行集成评估,得出整个武器系统的系统成熟度等级。     

基于体系结构技术的部队网顶层设计

通过对部队网的概念和有关问题的探讨,分析了部队网顶层设计的全局性与整体性,构建了部队网体系结构框架,根据体系结构技术提出了部队网顶层的设计思路和设计内容,分别从作战和系统视图、技术视图等方面对部队网顶层设计进行了研究,对可能的脆弱性进行了分析,并给出了相应的应对措施,为今后基于信息系统的体系作战模式集成奠定了基础。     

元器件性能退化信息的系统性能可靠性评估

性能可靠性方法为解决现代工程实际中的高可靠、长寿命、小子样产品的可靠性建模分析提供了途径.目前的性能可靠性研究主要是针对元器件开展的,对系统性能可靠性进行研究时通常需要将其看作一个元器件,需要得到系统的性能退化数据,在某些情况下,得到系统的性能退化数据比较困难.实际上,由于元器件的性能退化导致系统性能的变化,因而可以利...     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

Fullerene bisadduct stabilizers: The effect of different addition positions on inhibiting the autocatalytic decomposition of nitrocellulose absorbed nitroglycerin

To explore the effect of different positions and number of pyrrolidine bound to the carbon cage on the stabilization effect of fulleropyrrolidine derivatives to nitrocellulose (NC)/nitroglycerine (NG), we synthesized N-(4-methoxy) phenylpyrrolidine-C₆₀ and four different of bis(N-(4-methoxy) phenylpyrrolidine)-C₆₀ compounds through Prato reaction. Their structures were characterized by UV–vis, ¹H NMR, ¹³C NMR, high-resolution mass spectroscopy, and single-crystal X-ray diffraction. Their stabilization effect to NC/NG were investigated using differential scanning calorimetry, methyl violet, vacuum stabilization effect, weight loss, and accelerating rate calorimeter tests. The results indicated these compounds had excellent stabilization effect to NC/NG. The stabilization effect of the fulleropyrrolidine bisadducts to NC/NG is significantly better than that of fulleropyrrolidine monoadduct and C₆₀. Moreover, the position where pyrrolidine binds to fullerene in fulleropyrrolidine bisadducts is different, and its stabilization effect to NC is also different. The stabilization effect order of different bisadduct isomers to nitrocellulose is as follows: e-edge > trans-2> cis-2> trans-3. Electron paramagnetic resonance (EPR) and FT-IR were used to study the stabilization mechanism of fulleropyrrolidine derivatives to NC/NG. The EPR results also show that fulleropyrrolidine bisadducts with different addition sites have different abilities to absorb nitroxide, and their ability is better than that of the monoadduct and C₆₀, which is consistent with the results of stabilization effect performance test.     

基于程序设计类课程的教育技术本科生创新思维培养研究与实践

本文基于ATDE创新教育理论,以程序设计类课程为教学阵地,对教育技术本科生创新思维培养做出了相关探索与实践。创新思维是高级的问题解决活动。培养学生的创新思维更多体现在对学生解决问题的策略应用方面。对此,本文通过给出的案例,从不同角度详细介绍了程序设计类课程对培养教育技术本科生创新思维的实施对策,以期对提高本专业建设做出有益的探索。     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

装备表面现代维修保养技术研究

结合装备表面智能维修保养技术方面的研究成果,介绍了装甲装备故障智能检测技术、自适应、自修复功能材料,装甲装备器材全自动保养设备等先进技术,侧重装备维修保养阐述了如何提高信息化程度,推进军队武器装备维修保养技术的现代化建设。     

基于RTP协议H．264视频流传输QoS保证的研究

提出一个Linux环境下基于RTP/RTCP的H.264视频流传输的方案,在Linux中调用V4L(VideofourLinux)的API函数采集视频流,经X264压缩,RTP/RTCP协议打包进行传输。并通过RTCP的RR(接收方报告)包反馈信息和吞吐量公式来计算近似带宽,以起始帧量化参数start-qp为视频编码的调节参数,由近似带宽来控制视频编码的参数调整,达到控制输出码率的目的,实现对视频传输的QoS(QualityofService)保证。     

光电干扰武器系统C^3I可执行建模研究

基于UML的C3I系统模型的设计结果是对系统的静态表述,而C3I系统的本质是动态的。着色Petri网(Colored Petri Net,CPN)具有强大的描述能力及严密的数学基础和多种分析手段,并且它是可以仿真运行的。提出了从UML产品映射到可用于逻辑、行为和性能方面体系结构评价的CPN可执行模型的方法,先对光电干扰武器系统C3I进行UML建模的一般描述,再详细地阐述了光电干扰武器系统C3I从UML产品映射到CPN建立可执行模型的过程。通过对可执行模型CPN的仿真可对光电干扰武器系统C3I进行完整准确地评价。